pbReview.com / Check It Products Sure Fit Feed Adaptor / Check It Products Sure Fit Feed Adaptor / Check It Products Sure Fit Feed Adaptor / Check It Products Sure Fit Feed Adaptor / Check It Products Sure Fit Feed Adaptor
Spyder XTRA, rocket valve, Maddman spring kit, Spudnukl low pressure bolt, Mac Dev Gladiator 04 Regulator, Psychoballistics Bullet Drop, Crossfire 68/45 HP output fiber, ESP Frame, CIP surefit clamping feedneck, Evolution II y-board, All black Evil Pipe
secure clamping of hopper
I tried an ANS feedneck. It was impossible to get my Evo2 secure because the ANS was so tight. I couldn't get my Evo2 all the way into it. With the CIP surefit it doesn't matter what hopper you have, once you tighten down the clamp nothing is going to move. I can't believe how secure my hopper feels. Oh, and the anodizing seems like it's really well done.
In addition it lowered the overall height of my hopper. If you have the proper tools you can cut down the guns feed neck slightly and lower your hopper even more. Or you can cut down your hoppers neck slightly.
My only complaint is that they should make a one piece, low or no rise. I would prefer a feedneck that secures directly to the gun like the ANS but with a clamp. The only product that fits this description is also more expensive. NDZ has designed a no-rise adaptor that installs like the stock neck. However, you then need to buy an impulse threaded feedneck to attach to it. So it's becomes a 40-50 dollar item.
Buy this product. Check it Products makes great aftermarket parts. This clamp will take your mind of your hopper when you're sliding into bunkers. In addition you can cut down your spyder neck and hopper neck a bit for a really low profile hopper.
10 out of 10
Last edited on Wednesday, February 4th, 2004 at 5:15 pm PST
2" Flame Drop Forward
16" Freak Barrel
15* assault block with guage
68 3000 psi pure energy tank. w/ empire cover
I have used this product for roughly a year, and have concluded that it is an amazing product. Having a Halo B, i needed something to make sure its not going any where. I purchased it, not really knowing what to expect. To my surprise, the product took about 20 seconds to install, and i am now able to dive without worrying that my hopper is going to fall off.
It is lower than the regular Kingman plastic feed necks, with much more support. For $25.00, u can save about $150, because that's what it will cost you to buy another halo.
Overall, i would definitely recommend this product. Its well worth the money and great performance.
10 out of 10
Last edited on Saturday, June 18th, 2005 at 5:24 pm PST
Spyder E-99 avant, Check it Al feed neck replacement, SmartParts Teardop barrel, Ricochet AK, Check-It sure fit feed adapter, Dye Throttle 71ci fixed N2 tank
Fully adjustable for your hopper
This adapter is great, finally one that will let me mount my Riochet AK without either a lot of force or a lot of play. It slips on securely and is tightened via a small set screw. This has both lowered and tightly secured my hopper, which are both good things. My only couple of complaints would be the cost, $25 is a lot for a small slug of AL, and that the screws aren't standard allen wrench sizes. I think they are metric, but fortunately have a comprehensive set of star screw drivers of all things and two of those fit the small set screw and the larger clamp screw. All in all, it is worth the price, just be sure you have or can get the right screw driver bits for the two screws on it.
If you are having trouble getting your hopper to be secure get this and you will never have to worry about it again!
10 out of 10
Last edited on Friday, April 2nd, 2004 at 6:32 am PST
Stays on tight
Lower profile than plastic elbow
Metric allen wrenches
I really love my spyder and its never let me down, but the plastic elbow that came with it was a load of crap. I went through 3 plastic elbows then I just gave up. I saw this sure-fit feed neck at my local paintball shop and I just had to get it. Only 20 dollars and extremely durable. One day I was doing some hard paintballing and this feed-neck was great, I didn't even know it was there. I kno that its durable because at the last game of the day, we were in a field that was called Trenches (big field, lots of ditches and trenches). It was about 20 on 20 and we were at the beginning lines, the ref goes 3.....2.....1 GOOO!!!
I see my friends run off to thier cover spots and I follow.....I walk about 10 feet and I TRIP!!!! I fall face first into a ditch with my barrel 2 inches into the ground and then I roll over and my hopper lands top part first onto the ground. BAM!!! I'm kinda dazed but okay, I check my gun and I see that the barrel is full of dirt so I bust out my squeegie. After that I look over my gun.....and its FINE! Im like whoa! I look at the hopper and feed-neck and its in perfect shape...I'm surprisley happy and the rest of the day is fine.
Overall this feed-neck is very very good. I recommend it to anyone that is sick and tired of those plastic elbows. Everyone that has a spyder should use this feed-neck. One thing that I don't like is that the feed-neck is stuck on my gun now. The screw head has been sheared off from so many tightenings and loosenings that I cant unloosen it from my gun, which is okay because I have no reason too. Its extrememly tight on my gun so i don't worry about it falling off and im not worried anything will break.
I just got sick and tired of those plastic pieces of crap, so i went out and got this metal feedneck. this thing works great, hold my hopper really tight, and its not real tall. the only thing was that it scratched up the back of my feedneck, not really a big deal.
This is a pretty good feedneck/ adapter watever not much to say except thats its a good product, a big step up from the little plastic things
Spyder TL-X, Halo TSA Hopper, Stock Barrel, CIP Sure fit adapter, 20oz CO2
When installed it can put a small hole in your neck
I bought this because I was sick of having my elbows break and having my hopper constantly shake. When I got my Halo TSA hopper, I was afraid of having it fall or shake too much, so I bought purchased this product. My hopper NEVER moves now, and during woods ball my position is no longer given away by the sound of bouncing balls.
Buy it. Don't waste your time on cheap plastic elbows!
v2 Diablo Wrath
Check it uni-mount
halo b with rip drive
47 3000 tank soon to be 68 45
Easy to tighten or loosen.
This is a good feedneck for a spyder i bought mine at the local paintball store for $27. Check It in my opinion is the best aftermarket manufacturer for paintball stuff. This is a good price because if you figure the plastic ones break very often and are $4 after 7 of them youv'e paid more and they'll keep breaking.
none, all my tippys have em built in as you all know.
Icon E, hellavalota upgrades
PRICE =D cant be beat. STAYS ON
Its not a clamping neck, but if you want a clamping, buy something else.
This little neck is excellent. 25 bux for me after shipping. Its got a nice and low profile, fits onto the hopper easy, and once you seat it on the feed port, its not goin anywhere. Although the allen wrench you need to fit it to the marker was harder for me to get ahold of, its ok.
If you dont want the fussyness of clamping necks that can loosen, get this one.
While playing up at Rogue Paintball in Maine, during one of the breakouts that day, i just tripped right on my face. My gun slammed the deck in front of me and slipped away. The hopper spilled open, there was mud (raining that day) in the barrel, the thing really took a hard hit, but the neck held firm. Never came loose whatsoever. I set it once like a month ago, and now its like it grew into my gun, and became a part of it.
I would reccomend this neck due to its size, reliability, and overall functionality.
10 out of 10
Last edited on Thursday, September 8th, 2005 at 4:52 pm PST
Imagine, check it neck, dual detents, evil bolt, evil valve kit, tboard with eyes, timmy eye covers, fbm thorn drop, evil screw in 45/5000, dye stickies, fbm delrin trigger, halo b w/ victory board, magnum ap striker, evil detonater regulator, 15* assault block, fbm spyder body (tear drop, black and green splash), 25 gram microswitch, custom magnet, nd bullet volomuizer, shocktech spring kit, spimmy transformation, polished internals, shocktech shim kit,
Doesnt come of at all!!! Better than smoke stack!!! no orings
Doesn't come with tools
AWESOME!!! :-) deffinetly should buy it. You will never regret this! It is the best one available. They are only 2o dollars so go pick one up! It holds on real tight so you won't have to worry about it falling off. If you break plastic elbows like me deffinetly get this, it is awesome! It is worth every penny!
I picked up this feedneck off a guy living in Toronto. I picked it because I was sick of using those crappy stock feednecks that always break. I was originally going to get a NDZ or Lapco feedneck, but they didn't sell them at the local shop and I didn't feel like paying for shipping.
When I got the feedneck, I was quite impressed. It wasn't to high, and it clamped thew gun tightly, and at the time, it seemed to be pretty secure onto my gun. I was happy that I didn't have to pay for shipping with the other feednecks.
So I take the feedneck to the field. At first, everything seemed well, but then things started to go downhill. When I would start shooting fairly quickly the set screw which hold the feedneck onto the stock feed tube would loosen. So my egg was spinning around. I could do nothing about it....I had to hold the egg for hte entire round. So I go back and tighten the screw, and the same thing happens. It continued to happen all day and it was really pissing me off. I actually hated it....I wish I had spent the money on something better like the NDZ or the Lapco.
I really dont like the way this product performs. It doesn't hold anything well. It sucks. Definatly look for something better like the Lapco or the NDZ which screw directly on the body of the gun. Dont waste your money on this garbage.