Cocker® style threaded 12” 2 Piece Barrel / Bore Size: 0.689“
True Electro Pneumatic Operation
High Flow Vertical Inline Regulator
Adjustable Dual Regulator System
Low-rise Clamping Vertical Feed
Double Trigger with multiple adjustable trigger pull
Infraeye System Eliminates Ball Chopping (The eye works with a break-beam principle and can detect paintballs with a black shell without problem)
Fully Adjustable Dwell Time
Lightweight Microswitch Trigger
300psi Micro Inline Gauge
Extreme Low Pressure Operation
Titanium Nitride coated Ram and Cup seal increases Lifespan
High Flow Delrin Bolt with stainless steel (TiNi Coated) Pull Pin
High Flow Barbs
Solenoid with overpressure relief
Tournament Legal Semi-auto Board
ROF with Eyes off: 8 / 10 / 12 / 14 bps
ROF with Eyes on: 18 / 22 / 26 / 30 bps
Deluxe Carrying Case Package
10ml Tube free O-Ring Lubricant
Power Supply: CO2 or HPA / N2, HPA/N2 recommended
Electronics: 9V battery
Recommended pressure input form tank:450-500ps (Tank with Preset System is recommended)
Operating Pressure: 220-250 psi
Cycling pressure: Under 90 psi
Cocker® is a registered trademark of K2 Inc., Nemesis™ is a trademark of CYP Corp.
The Ariakon Nemesis are older, so while they may be available used and in a few cases new, they are not commonly available anymore.
Very nice Milling,
Little to no kick
Fast and accurate
Its slighty heavy weighing in at 3.1lbs
Okay Let me start off by saying This marker is Just like any timmy out there, This gun comes with a Derlin bolt , Clamping feedneck a 30bps board with eyes . Mine works at 85 psi on the Lpr , And 220 psi on the Inline Reg.
Today i went out and tested the Marker , I found that it has very little to no kick its amazing. Its kinda heavy at 3.1lbs but if your not a wuss that wont matter. My field only fills tanks to 3000 so my 68/4500 filled to 3000 i got 1200 shots with about 200 psi left .
The stock barrel is pretty decent but like always i recommend getting a kit like a Freak or something of that nature. The milling and color on this beast is very impressive. The Weaknesses that i posted about the clamping feedneck is this. I have a egg when i put it in the feedneck it fits kinda loose making me put a peice of tape on the feedneck. I tryed a halo and it was to big and would not slide down the feedneck without some sanding. To me clamping feedneck means perfect fitting but thats okay Its nothing i cant live with. This gun is pretty fast, I will be getting another trigger soon prolly the critical trigger with the magnet mod so i can rip faster. I will say this my egg held me back when shooting this gun . When i put a halo on it i could tell a HUGE diffrence in the ROF . The eyes work Great too.
Conclusion to this. Alot of people say this gun is hafe the price than a timmy with better to the same proformance . Well thats hafe true. You can get a Timmy 2k2 and others for around 650 to 800 brand new . I bought this gun for 650 . But this gun comes with most of the upgrades that a older style timmy dont have. So you maybe saving 100 or 200 on this gun . It is very fast and very consistant for a timmy clone . I say if you wanna be diffrent get a nemesis . Its just as fast as Real timmy with frenzy board or Was but you cant get the bounce like those other boards i mentioned above . I give this gun a 9 out of 10 because no gun is perfect in my eyes.
9 out of 10
Last edited on Tuesday, October 12th, 2004 at 6:03 pm PST
Black+silver nemesis, 70/4500 crossfire lp, halo b
Barrel, i would get a new trigger
Good speed+good accuracy
Nothing in particular
Alright this is almost exactly like an 03 or 02 intimidator. it kinda remninds me of a storm or gz. it's just a little heavier. it shootsa about the same. If you like the 03 timmis and you find this for a low price, go for it. i wouldn't say it's any better, but it's great if you find it for cheap. now i don't personally like the 03 timmis but alot of people do so they should like this.
evo II with z board
nitro duck air tank
Fast hopper,this gun shoots ropes
Speed,this gun is all around amazing
Ariakon is mainly a woodsball and scenerio company,not a big weakness
This gun is flat out amazing,when i firstt shot it i was takin names.My only problem is that there is no real intimidation factor,but that doesnt concern me too much.This gun is well worth the money,its very hard to find,but if you find it do me a favor and buy it!
This gun is not too popular but is just as good as any other high end gun!
Most timmy's from z's to ripper timmy
NME but that's a timmy clone
Preadator II Board
Check-it low rise
Max-flo w/ 68ci 4500 tank
Halo B w/ rip drive
Full Freak Set
Custom Anodizing-tequila sunrise
Halo B w/ Rip Drive
Halo B w/ Rip Drive
Air America 88/4500
Full Freak Set
I don't really know of any since it isn't mine, but i guess the basic stuff like a barrel, fast loader, and a good air system.
High-end timmy speed for low-end timmy cost
Not really a prestigious name
Well, when i saw the marker, i was like "dude, you got a timmy?" He immediately responded no, and that just kinda set me down a little. He said it was a nemesis, which i had never heard of, but he said it was a timmy clone. Well, he said he got his for about 750, about the price of a gz intimidator, and so i immediately didn't think it was going to be something special. Turns out though that this was a fast gun! I think he had a stiffi so it was extremely accurate too. I really think that this marker could fool anybody into thinking that it was a high-end 1500 dollar timmy.
Except, once you find out that it isn't an intimidator, it kind of loses that factor of intimidation to the other team. And also, it doesn't seem that special anymore....
Based on what i got from it, it was a great marker, but it's a timmy clone, and that's all it is, no better, no worse. And that aura that surrounds timmy's are gone with the nemesis.