Spyder Imagine 2004 Blue/Grey
Empire Reloader II Black
Smart Parts 20oz. CO2 with On/Off
50g Micro switch
ACP Thrasher Trigger
JT Nforcer Thermal Mask
Dye Ultralite 14"
Stock Bolt with Removed Venturi
High Flowing V/A
GT Medium Z Drop Forward
32 Degrees Spring Kit
-No Side-Side Slack
-You Have to Sand it to Fit Your Marker
-The Adjustment Screws Need Loctite
This trigger is truly the best trigger available for ESP frames on the market.
You can adjust the tilt so that it can sit right in front of the switch, adjust the front-slack so that the switch is closer to being depressed, and you can adjust the back-slack and get rid of all the excess pull (great for high ROFs). This can all be done to achieve a 0.5 millimeter trigger pull, or even less.
The fact that it comes too large to fit into the markers frame is how they eliminate the problem of side to side slack, so all you have to do is easily grind down the sides at the top of the trigger until you have a nice smooth and snug fit.
I also noticed this trigger is very light, and that is most definitely not a bad thing. To get an idea of how light it is, it can't even depress my 50g switch when I turn it facing up and jerk it up and down.
Finally, on the downside, I noticed that if you adjust your trigger then even just dry fire a few rounds, the trigger screws will move and they even made it so that I could not fire my marker. This is very easily solved by adding a very small dab of Loctite to each and every adjustment screw on the trigger.
This product has also been improved from the much similar ACP Slasher trigger, this product has been redesigned to have the best ergonomic position ever for walking the trigger.
Overall this product is the most professional, light, adjustable, and quality trigger for ESP frames on the market today. Whatever your level of playm if you want to achieve those higher ROFs then this is the trigger for you.
If you are thinking of getting an aftermarket trigger for your E-Spyder or Clone then definitely get the ACP Thrasher Trigger. Even if you think you want the ACP Slasher, get the Thrasher, it is like it is a newer version of the Slasher but has an overhauled ergonomic design.
10 out of 10
Last edited on Saturday, January 29th, 2005 at 7:39 pm PST
Spyder E-99, 3-A knock out barrel, apocalyps thrasher trigger, custom products flame drop forward, acs anti-chop bolt, ANS feed neck, low pressure chamber,DYE sticky grips, ricochet apache loader, 3500 psi nitro., trinity assault block with pressure guage.
3 way adjustment screws.
Best looking flat trigger.
You gotta sand it down.
My friends and i call it the paper clip, because no kidding, that's how much it weighs and it's also very ajustable and a great invention, just like the paper clip. I was tired of having my gun with $400 worth of upgrades having a side to side wobble on it. So i bought some cheap flat trigger that supposedly eliminated all slack in every direction. Phyc. It didn't do squat. But with this trigger, the first screw on top just gets the trigger into the vicinity of the switch, the second screw fine tunes the distance going back to the trigger, ( which is great because you don't have to take the entire handle off to adjust it.), and the third one takes care of any slack after you hear the click. You have to sand down the sides to get rid of the side to side slack, but it's not much and it's the best way to get rid of it for good. My friend spent about $100 on a magnetic trigger for his angel, supposedly the shortest trigger pull in the world. Well, we tested mine and they are almost identical. They both feel almost like the trigger's not even moving.
I've played paintball for 6 years since i was 8. Trust me, i know what's out there and this is the best trigger for under $100.
10 out of 10
Last edited on Saturday, June 11th, 2005 at 2:34 am PST
No trigger spring needed
Smooth Round Edges
NO side to side slack
Not a Thing
This trigger is Pure quality. It is made of light weight aluminum. When you get the trigger all you have to do is sand down the top part which is how you Eliminate all side to side slack period. You do not use a trigger spring with the trigger because it sits right on top of the switch which makes this trigger super easy to walk and easily max out the BPS on your gun. If you have been looking for a trigger dont waste time on a sweetspot. I had one before this trigger and it has way to much side to side slack.
If you are looking to increase your speed and want a great feeling trigger without any side to side slack than this is the trigger you want!
e-99t-board,bob long regulator, mad man valve, systemx drop foward, dye sticky, acp blue bolt, acp magnum striker, dye ultralight boomstick. 68/4500 tank, halo b hopper acp thrasher trigger
It has three set screw and eliminates sid to side slack
When I first installed my thrasher it wouldnt move very easily in my gun.
When I first got my thrasher I out it in and thought i was done. But then i tried to pull the trigger and it wouldnt move. I took it out and realized that the sides were a little to wide. So I grinded the sides down a little bit and it worked good. WHen I put it in my gun after that it worked better than I thought it was going to. The three set screws was a good idea and worked great. The only thing I recomend is putting some loc-tite on all the screws. THis is the best triger iI've ever used on my gun
A great trigger but recomend grinding down the sides a little but and putting some loc-tite on it. The grinding isnt a big deal it tokk me like 5 minutes at the most. But this is a great trigger andrecomend it to anyone with a spyder.
14" Dye Titanium Boomstick
CiP Assault block
Mac Dev Gladiator reg
Dye 750 psi mini gauge
Hybrid Hedlok 2, lever clamp feedneck
Bandit LP Bolt
DH Titanium Striker
32* spring kit
Custom highflow valve
Custom, low profile eye covers
CP rail drop
CP 05 ASA
Dye Sticky 3 grip
Apocalypse Thrasher trigger
T-board w/ upgrade chip
Kila V2 magnetic ball detent
CiP Dragon Snatch grip.
Crossfire 70/4500 peanut tank
Dye tank cover
Custom fit. 3 adjustments.
Must modify to fit. Too thin
This trigger is probably the best trigger you can get in terms of getting exacty what you want, due to the adjustments available. Most other triggers only adjust front slack(extra play before you push the switch) and back slack(after switch is pushed). The thrasher,as well as the ACP slasher, offer a rake adjustment. This allows you to change the angle of the trigger to get the most speed out of walking your trigger. These triggers also come oversized. You will have to sand down the trigger in order for it to fit. This allows you to get a perfect fitting trigger so that you have no side to side slack. Although with other triggers, side to side slack can be removed with small washers. Now the bad stuff. On AMGs the rake adjustment screw doesn't line up with the switch. So there is no rake adjustment. This trigger is too thin. If you set the trigger straight up and down it's almost impossible to walk the trigger while gripping the frame. Not so good if you are the type that likes to shoot lanes while reloading your hopper.
Its a great looking trigger with great features, but in terms of preference, I would go with the CiP trigger.
Very adjustable/easy to adjust
easy to install
Need loctite to make sure set-screws don't fall out
This trigger has proved it self well on the field and off. you may catch yourself adjusting it alot only because you think it could be better when its fine. ****note*** if you need to sand your trigger... keep checking it, this trigger is great if sanded just right... very minimal to no side to side slack when done correctly.
if you plan on buying an aftermarket trigger for you spyder/spyder clone i would definantly reccomend this gun to any player.
-Check It Products 15* Assault Block with Bob Long Mini Guage
-Bob Long Torpedo Reg. with Violent Products Derlin Piston
-Trinity Push Button On/Off ASA on a Violent Products No Drop Rail
-Trinity Low Rise Clamping Feed Neck
-Maddman Rocket Valve
-Dark Horizons TI Hammer
-ACP Blue Bolt
-ACP Thrasher Trigger
-ACP Snatch Grip
-DYE Stickie Grips
-T-Board with T-Chip
-Break Beam Eyes
-Hybrid Technologies Timi Skull Shadez
-45/4500 Pure Energy with Dye 05 Rhino Cover
-Full SS Freak Kit
-Evo II with Z-Board and Paddle Mod
Low pressure set-up. 300fps at 280psi
-3 way adjustable
I bought this trigger because i was tired of the side to side slack that most other after market triggers have. The thrasher is very light and very comfortable. I was easely able to walk it. I was also fortunate to get an annoed trigger, i got mine inblack and it looks sick on my Fenix.
I would recomend this trigger to anyone who is lookng for the best trigger on the market
Stock trigger, friend's slasher, another friend's sweetspot. only the slasher is as good.
bunch of upgrades
Lightness, looks, 3 pt adjustability, nice anno, great customer service
The only bad thing is that the screws dont come w/ loctite on them.
Alright, I prushased this late 2004 and have used this ever since.
quality product. the anno looks extremely good. i noticed that it weighs nearly nothing (sorry, i dont have any exact measurments). i was also impressed that it came w/ an allen wrench.
i took off my frame, tapped out the pin from the side w/o the "spyder" on it. took out the stocker trigger (already had spring out), put on the trigger, took out all the set screws and got out my loctite. i figured otu a way to only need two of the set screws to jully adjust front and back travel, but this sacrifices the tilt adjustment. so i put some loctit on one of the screws and put it in. i pulled the trigger all the way back and tightened the screw untill the noid clicked. then i did the same to the top screw and adjusted that from forward slack.
first time using it:
got my tank filled and bought some paint. got my gear all set up and let 'er rip. i was easily out shooting the stock board. i could just walk at a relaxing pace and hit 12ish bps on the stock board. i put my tboard in and was gettin steady streams of 16. this was a great improvement over the stock trigger. i also get no bounce what so ever, which is good for the few honest ballers of us out there.
Great product, great price, great company. acp really has the art of triggers down. the only problem i can see is the lack of loctite, but thats a $2.50 fix. this is probably one of the best marker-specific upgrades out for a spyder right now.