|
|
pbReview.com / Extreme Rage Shocker Clamping Feed Neck / Extreme Rage Shocker Clamping Feed Neck / Extreme Rage Shocker Clamping Feed Neck / Extreme Rage Shocker Clamping Feed Neck / Extreme Rage Shocker Clamping Feed Neck
Extreme Rage Shocker Clamping Feed Neck Reviews
|
|
|
|
Number of Reviews: |
6 |
|
Average Rating: |
6.3 / 10 |
|
Manufacturer Website: |
Click here |
|
Suggested Retail Price: |
$25 |
|
|
|
| These feedneck's let you clamp your hopper down, without any tools! The twist lock feature makes it a snap to put your hopper on and take it off! |
|
| Product Availability | |
|
| The Extreme Rage Shocker Clamping Feed Neck is older, so while it may be available used and in a few cases new, it is not commonly available anymore. |
|
| Places to Buy | |
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 3 of 3 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
| Marker Setup: |
Black Smart Parts Ion
Extreme Rage Clamping Feedneck
Pure Energy 72/3000 tank
Evo 2 w/ zboard |
|
|
|
|
| Strengths: |
Easy to tighten and loosen with hands
No tools needed.
Easy installation |
|
| Weaknesses: |
None |
|
| Review: |
This feedneck is great. You can tighten it so your hopper wont move AT ALL with only your hands and at the same time you can loosen it with your hands. All you need is loctite and your gun and you can install it. If you dont have loctite its like 3 dollars. I found this to be a great product and its not expensive at all! |
|
| Conclusion: |
Great product, cheap in price, not cheap in quality. I recomend this to anyone who still has a stock feedneck. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| 3 months | 2 of 4 people found this review helpful.
|
|
|
Paintball
Experience: |
3 years |
|
Similar
Products Used: |
Stock feed neck, check it products sure fit feed neck |
|
| Marker Setup: |
Smart Parts Ion, Shocktech Drop, Evil pipe kit, Extreme Rage twist lock feed neck. Egg2 hopper. |
|
|
|
|
| Strengths: |
Will hold once tightened with pliers |
|
| Weaknesses: |
See review |
|
| Review: |
This is the worst feed neck I have ever used, I would not suggest buying it. I found it to be very hard to tighten with out the use of any tools. Once you get it tight it is impossible to get it undone with out using tools. The feed neck does not have anything to grip on. I also found the metal used to be of a low quality. this feed neck is the first peace of equipment i regret buying. I was very disappointed with the quality. last time i played i managed to get a peace of wood stuck in my egg2 and the hopper came out of the feed no problem but not a chance of it going back on.
|
|
| Conclusion: |
I would not suggest buying this feed neck. you should save up and get a better on efor a little more. save your self the hasel, and get one that does the job right. |
|
| Rating: |
|
|
|
|
|
|
|
ikey |
|
Friday, April 29th, 2005 |
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
3 years |
|
Similar
Products Used: |
other ones |
|
| Marker Setup: |
Upped impy, nitro eggy, bla bla bla |
|
|
|
|
| Strengths: |
Hold sorta tight, price |
|
| Weaknesses: |
Not as good as other ones |
|
| Review: |
If you have a halo this is a very good feed neck. however, if you have anything with a smaller feed neck this may not be best. this feed neck does not hold as well as otyehr more expensive ones but if does the job. very good for 15-20 bucks. |
|
| Conclusion: |
If you are on a buget get this. it does the job. i like the grippy part, helps you tighten and loosen. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 1 of 2 people found this review helpful.
|
|
|
Paintball
Experience: |
More than 5 years |
|
Similar
Products Used: |
Stock impulse feedneck |
|
| Marker Setup: |
04 Red impy
progressive barrel
Voodoo Delrin Bolt
Extreme Rage Low Rise Twisting Feedneck
CP Roller Trigger
dragun drop foward
max flo reg
crossfire 68/3000
Empire Reloader |
|
|
|
|
| Strengths: |
Twists to lock down, shorter than stock neck |
|
| Weaknesses: |
See Review |
|
| Review: |
i own a paintball store and bought this through one of our dealers for $20, not a bad price. When i received the neck, it said that i needed loctite, ok, not a big deal. Then when i started taking off the stock neck, i had a lot of trouble. Smart Parts used so much loctite, i had to get the biggest wrench i could find. Once i got it off, I put loctite on the new neck and screwed it in. Now all i had to do was put the hopper in and twist it until it was tight.
It holds the hopper perfectly but it feels a little flimsy. The metal they used is pretty thin, but it doesnt the job.
|
|
| Conclusion: |
Overall this is a good product. much better than the stock neck, and does what it's supposed to: hold on hoppers without tape. I give it a 9 cause it does what its supposed to do, but it is kind of cheap feeling. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 0 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
Similar
Products Used: |
stock |
|
| Marker Setup: |
2004 B2k w/pds
Evil detonator reg
Halo b
Crossfire 47/3000 |
|
|
|
|
| Strengths: |
-Holds my halo
-Easy to get my hopper on and off |
|
| Weaknesses: |
-Cheaply made
-Needs to be tightened hard(able to do it with your hands) |
|
| Review: |
I went to my local paintball place and asked them how much they wanted for this feedneck. I got it for 8 dollars. I could not pass it up. It holds my halo secure if i tighten it tightly with my hands. The metal is a little cheap. I have recently compared it to my friends lapco neck and it is basically the same thing without the heavier metal. Other than that it is just another clamping feedneck. |
|
| Conclusion: |
This is not the best feedneck but it serves its purpose. The only reason i got it is because it was cheap. If you are looking to get one i would suggest one with heavier metal. but for 8 bux how could i pass it up. |
|
| Rating: |
|
|
|
|
|
|
|
bobpb |
|
Saturday, June 4th, 2005 |
|
Period of
Product Use: |
| Less than a month | 0 of 2 people found this review helpful.
|
|
|
Paintball
Experience: |
More than 5 years |
|
| Marker Setup: |
ion
halo b
pure energy 4500 45cu
|
|
|
|
|
| Strengths: |
None |
|
| Weaknesses: |
Paintballs get stuck inside
unscrews off the gun, instead of loostening its grip. |
|
| Review: |
This is a bad feedneck. I got mine brand new, and the next day when I played with it it wouldn't feed. The brand new tournament grade paintballs were being stuck inide the neck. It wouldnt feed and i got shot because it wouldnt work. The paintballs wouldn't fall through. And I know it wasn't my hopper, because my halo b was on and when one person let me use his spare neck it worked fine with my ion. This is a crummy feedneck. |
|
| Conclusion: |
This neck is terrible, well at least the one I had. |
|
| Rating: |
|
|
|
|
|
|
| Places to Buy | |
|
|
|
|
|
