Spyder pilot acs
lapco clamping feed neck
12' quiet riot
48/3k pure energy tank
12v revy w/ x-board
t-board with eyes
It makes your stock feel like pushing two magnets together
If you are going to get a t-board, that you have to spend $12 more on the t-switch. I will guarantee you that your bps will go up (because it is so light) I got the 25g but you can get a 50g or a 150g. They all cost the better, but i say lighter is better. This way you can roll them up like a fatty and smoke the hizzel out of them.
Kingman Raven Nexion, Scenario Dreams 50g Switch, New Designz High Flow Valve, Viewloader Evolution II Z Board, Pure Energy N2
Easy To Install
I got this a couple months ago and it only cost me $10. I got the 50 gram switch because I heard with the 25 you get mad bounce. Anyway, it took me 10/15 minutes to install. Only problem I had was removing the old cables from the harness. It says you can use a staple but that didn't go well for me. I got a needle after 5 minutes of trying and that went much easier. I put everything back together and tried it out. I can shoot so much faster now. It really does make the trigger pull 5 times lighter. This has to be the best upgrade you can get for under $20.
I would buy it. Haven't tested the 25 gram one, but I know the 50 gram works fine for me. This has to be one of the best upgrades for your gun, and it's probably the cheapest. Hell, Dye grips cost more than this.
stock spyder switch
my was'ed imps switch and the cricket boards
stupidly fast raven nexion its my WTF gun
Almost to light for the amount of recoil the spyder has
I bought the 25 gram switch when i ordered the t-board and t-chip in december after i fryed my stock board, the switch is just insane if you just think about shooting you can pull of streams upwards of 20 bps in semi auto mode with a spyder, i play with this gun atleast 2-3 games each time i go on the weekends and the little kids just love to play with the spyder and say how wrong it is
kinda pointless on a stock board because i was already capping out the stock board which is why i got the tboard also other then i fryed the stocker trying to fix it
alot lighter then my stock nexions 150 gram and worlds lighter then the 250's in everything else
50 grams would most likly be better to deal with the bouncing issues but with all these fools ramping now a little bouncing spyder is usually overlooked :P
stock 250g switch, kb9 50g switch, some 50g switch off of ebay, and 50g t-switch.
04 Dragun TES, ACP delrin bolt, 68/3000 crossfire, evo2 loader, odyssey twist-clamp feedneck, dragun The One board (on it's way).
Light and easy to pull, comes prewired
Not very modifyable, doesnt have a jack, and harder to install.
ok, well, I sent my switch off to a friend of mine to get it resoldered, since one of the leads broke the solder and came loose. The darned post office lost it, on its way back to me. All I got was an envelope with a big tear in it!
So....that put in the market for a new switch, wires, and jack for my TES. I was torn between the t-switch from scenariodreams, and the spli-switch from sundragonpps. The spli-switch didnt have the terminals for the jack, which the t-switch does, to that was one less thing that I had to buy. so I went with the t-switch.
Ok so it gets here, and I get the leads put into a jack. And then, have to take my gripframe apart, to get to where the boards have the place to jack it into. then had to put my boards back together and screw them all back in.
Worked it into the space behind my trigger, and put the retaining screws in. (Draguns have screws, not pins =P ).
Then I turned it on, turned off the eye, and tried it out. Two shots, the button sticks and it wont shoot again. No problem, had that happen with other switches. Loosened up the bottom retaining screw till the button popped back up and tried it again.
Not bad. not bad at all, its definitely fast. But....I cant sweetspot it, like I did the one that got lost. soooo take it apart again, and start going to work on the mods.
taking the casing apart, the first thing that I notice, is it's spring. Its one of these half-spring types. Where half the spring is straight, for less tension. Second thing I notice is that where most spring type switches have a hole in one of the connectors to hold the spring in, this one has two notches cut into it. First thought was "Uh oh. thats not gonna hold the spring on well, after I mod it."
So I do my mods, and low and behold the spring is too light to keep the button held forwards to fire. so have to redo it.
Long story short, there is very little modification that you can do to this type of spring-type switch. there just isnt enough tension in it for the mods to work right. it would also trigger at the slightest jerk of the marker, after I started modding it, which would mean INSANE bounce.
Also a note to any dragun owners that might get this, or another 50g switch. Like I said, that bottom screw can cause problems with the button not working right. Either ease off the tension of that lower screw, or take the guts out of this switch and put them into the casing from your factory switch. Dunno why these aftermarket casings cause the problem, but thats the solution.
If you are happy with a regular 50g switch, that you can just plug in and rip, this is a GREAT switch. Very light, and very fast. GET IT! You will be pleased.
If you are looking to get a switch that you can do further modifications to, look elsewhere, cause it will just piss you off.
Giving it a 7 because its more work to put in, than a standard unwired switch, or spli-switch. And because its not very modifyable.
50g switches...(spli switch)
magno switches etc...
04 Mongoose 2 Reincarnation LCD Black to Red
05 Dye Airport with on/off
CP "sweet spot trigger" Custom fitted
Dye E-Spyder stickies 3 Custom Fitted
Very nice...well made..light`
when i first got this....i wuz totally shocked on how tiny it wuz...lol...its soo easy to install...all u do is punch out the pins and put in the 2 connectors where the old ones where and ur set....i bought both 25g and 50g switches...25 grams was to light but the 50g wuz just PERFECT...i can easily hit 18bps on my gat....tottaly sugest getting one
spyder pilot, with t board/eyes ,50g t switch, ACS bolt,stock bolt, vewloader revolution v12, home made lpc with gauge,20 oz co2
Light as cr**
This is great but befor this u might want to check if the switch is the problem for your slow walking or is it the trigger spring. if it is the spring make it magnetic that helped me a lot so there was no resistance on my trigger.but sometimes it is the switch
CP 14" chrome Barrel
9 Vt Revvy (soon an eggy 2)
9 oz or 20 oz Co2
This is the best upgrade for $10.95. if your thinking about getting a new trigger get this instead, after if you still want a trigger get one, or do some modding on the stock one. the only problem is that i am capping the stock board in speed. a good accessory to fix speed issues is the t-board, it has an unlimited ROF.
It says I gave it a 10 out of 10 below but I really give it a 25 out of 10,
buy it for the sake of your gun.
Spyder Imagine 2K4
20 oz. CO2 tank
VL Quantum hopper
16" J&J Spyder Ceramic Barrel
Spudnukl Nylatron Bolt
Easy to install
I ordered the 25 gram switch despite what people said. I was slightly worried about bounce, but when I got the switch I was relieved. It has a small metal lever above it, acting like a spring. The pull was too strong with the trigger so I removed the trigger spring. Now, the trigger requires MINIMUM force to move. The small lever above the button acts like the spring and pushes back, resetting the switch. I got my trigger to the point were you can blow on it and it will go off (yes, I tested).
GET THIS SWITCH! You will not be sorry if you do. The make the tigger pull so light it is almost like it isn't there. This is a very cheap but effective upgrade you can get for your Spyder/Spyder Clone.
Spyder Electra, Dye Grips, Sweet Spot Trigger, 4-stage subzero expansion chamber, Shochtech low pressure chamber, Checkit Surefit clamping feedneck adaptor. 50 gram switch. Evo II Hopper, CO2, and I switch between System X 1 piece barrell with Smart Parts teardrop all depending on paint I use.
Easy to Install
Increases our ROF (bps)
You end up using more paint because you will shoot faster.
I bought the 50 gram switch. Huge improvement and makes the trigger pull soooo light. I have accidentally fired the gun sooooo many times because the trigger is so light. I don't experience any boucing from the switch. I also have the sweet spot trigger with my electra. The only tricky part is setting the trigger where you want it.
Cheap, Easy to Install. Make your friends say WOW. Go get it
-Check It Products 15* Assault Block with Bob Long Mini Guage
-Bob Long Torpedo Reg. with Violent Products Derlin Piston
-Trinity Push Button On/Off ASA on a Violent Products No Drop Rail
-Trinity Low Rise Clamping Feed Neck
-Maddman Rocket Valve
-Dark Horizons TI Hammer
-ACP Blue Bolt
-ACP Thrasher Trigger
-ACP Snatch Grip
-DYE Stickie Grips
-T-Board with T-Chip
-Break Beam Eyes
-Hybrid Technologies Timi Skull Shadez
-45/4500 Pure Energy with Dye 05 Rhino Cover
-Full SS Freak Kit
-Evo II with Z-Board and Paddle Mod
Low pressure set-up. 300fps at 280psi
-Makes getting a highr ROG much easier
I have bought 2 50g switch from www.scenariodreams.com and have nothing but good thngs to say about this product. The first switch i bought i installed it on my Fenix that also has at-Board. This switch worked great and makes for faster shooting. The second one i bought i installed on my brother stock 04 Imagine. This allows him to nearl max out the ROF on his stock Imagine Board. This has go to be one of the best up-grades for E-Spyders. Instalation is simple. when you get this in the mail there is a web adress on the pakage. This site will give you detailed instuctions as welll as pictures on how to install. all yopu need is a screw driver and a staple. yes a staple.This switch comes pre-soldered, wich was a huge factro why i bought this particular switch. Much better than a moded stock switch or a switch with levers.
I strongly recomend this product, noobs and veterans. Along with this i also recomend either a new trigger or modding the stcok trigger by making it flat. for $15.00 this thing is the best up-grade. I will also suggest getting the 50g switch instead of the 25g switch. In my opinion the 25g switch is to ligh and feel it is a bit dangerous. I may casue some serious bouncing.