Designed to fit 03, 04, Dynasty, Warped, and other aftermarket Shockers. Call or Email Kila Products if you need V2ís for a Nasty Shocker. Available for Vision Side and Non-Vision Side. Better wear characteristics, replaceable pistons, blow-out proof design feature optimizes your Shockers performance.
Quick Force Return TechnologyTM
Variable Force ControlTM
Ultra-life Delrin Piston
Rebuildable Springless Design
A mechanism that is unable to be blown out of its casing like the traditional style detents
The Kila Products KilaV2 Shocker Detent is newer, so it should be commonly available, both new and used.
superman Ton Ton Shocker w/ Q lock, predator board, freak kit, Sidewinder reg, dark shocker trigger, hybrid grips, unimount, NDZ stinger V3 bolt kit, kila V2 detents.
Never blow out, easily rebuildable
Dont fit some private label shockers without some grinding
First let me say the one bad thing about these. They are pretty big. not only do they stick out quite a bit, they are wide. So wide in fact that some of the PL bodies wont fit on these unless you grind down the 2 corners so it fits. And these things stick out quite a bit. the stock detents sat well inside the little hole in my body for them. These have the rounded part sticking out above my body.
now onto the good. They never blow out and there is no spring to bind up. They look really clean and good and they are rebuildable 3 piece design. If you break paint, you just unscrew the cap (you can even leave the other part on your gun) and pull out the delrin piston then clean it off and put it back together.
get them if you have a stock body shocker, if you have a PL body such as a Ton Ton or Shocktech, you will need to grind them down a bit to make them fit.
I love these top notch quality, theyre fully rebuildable, 100% blow out proof, lifetime warrenty. They have a great ano finish to them. The only draw back to some would have to be the $45 price tag, but for someone looking for the detent tunability get these. need i say more
Save up your pennys and buy a pair. They make these detents for almost any marker
Dont waist your money on these they are not made like they used to be!! took oring of so i could get out the piston and the little oring ripped on very sharp threads.basically a little oring holds the piston in the detent ,wich also puts more unwanted tension on piston ,more than just magnet.
if your feeling crafty get the hybrid ones and magnet mod them it will turn out better than this new version.common screw driver to install and remove.scratches with screw driver easy!its not like the pictures of the old version where you can take apart on face side .ordered straight from company and they sent me just two of the no vision side detents so the vision covered side is to short!
Very expensive ,very cheaply made ,should give extra litlle magnets incase u lose wich u will cause they just stick on flush outside of detent. like i said very expensive for what u will get for 50$ shipped
I think that these are the best detents around for Shockers. They work great and should last much longer then stock ones. They are a little pricey but the NDZ's are the same price. They don't look great but they don't look bad either. The shipping was very fast, I had them in a couple of days.
The best dentents around. Buy them, shipping is fast and they are woth the price.