|
|
pbReview.com / Shocktech Clamping Feed Neck / Shocktech Clamping Feed Neck / Shocktech Clamping Feed Neck / Shocktech Clamping Feed Neck / Shocktech Clamping Feed Neck
Shocktech Clamping Feed Neck Reviews
|
|
|
|
Number of Reviews: |
4 |
|
Average Rating: |
9.0 / 10 |
|
Manufacturer Website: |
Click here |
|
Suggested Retail Price: |
$35 |
|
|
|
Tired of your loader falling off at the most inopportune time?....Shocktech Clamping Feed Necks are aluminum and virtually indestructible. A simple twist with an allen key or your fingers and you're literally chocking the life out of your loader! Don't worry about gracefully sliding behind a bunker, just attack, .....it's ok, your gun and loader will still be together when you wake up.
|
|
| Product Availability | |
|
| The Shocktech Clamping Feed Neck is newer, so it should be commonly available, both new and used. |
|
| Places to Buy | |
|
|
|
|
|
|
Period of
Product Use: |
| 3 months | 2 of 2 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
Similar
Products Used: |
other feednecks |
|
| Marker Setup: |
-Black Magic SF
shocktech feedneck
CP detent
14" kaner
Torque loader
68/45
---------------------------
-05 Prostock
wgp grip feedneck
bm c-rod
14" dye ultralite
Eggy3
---------------------------
-X-7
SP tac. barrel
G36x mod kit
remote line
---------------------------
-2k5 Empire Intimidator
M3 board
CP reg
Kila detents
Shocktch feedneck
uni on/off
68/45 |
|
|
|
|
| Strengths: |
Newer ones come with a lever.
Holds tight.
Not too expensive for a feed neck |
|
| Weaknesses: |
Upper half of the neck came loose and spun when not tightend |
|
| Review: |
I got this for around 30$ and i am currently using it for my eggy3. The newer ones come with a lever instead of just a knob so it is much easier to adjust and fits loaders easier now so you shouldnt have to sand or add electrical tape. Although i did have one problem with the feedneck spinning around, but only happend when it was not tightend correctly. |
|
| Conclusion: |
Nice feedneck, i would reccommend it for other cocker users |
|
| Rating: |
| 9 out of 10 | Last edited on Tuesday, April 22nd, 2008 at 9:31 am PST |
|
|
|
|
|
|
|
|
The accuracy of this review is disputed. Please see discussion on the comments page.
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
3 years |
|
Similar
Products Used: |
Stock Autococker Feed High/Low Rise |
|
| Marker Setup: |
Blue/Black Fade Mini Orracle
Kaner Barrel
Shocktech Chrome Feed Neck
Shocktech Blue Drop
Evlution 2
Pure Energy 3000/48ci
|
|
|
|
|
| Strengths: |
Good Looks, Strong, Light, Easy to Tighten/Untighten, Holds Hopper well, Made by Shocktech |
|
| Weaknesses: |
Great Feed
Doesn't fit the Evlution 2 Hopper without electrical tape.
|
|
| Review: |
This feedneck is very quality made and has a good feel and look to it. It is very simple to use and works well The only complaint I have is that the Evlution 2 hopper will not fit it stock, it requres a layer of electrical tape. But that protects the feed anyhow so no big problem there. This feed adds a very nice touch to the gun, and it is made by Shocktech (The best custom company out there in my opinion). The feed neck holds the hopper with a death grip, no spin or slip. |
|
| Conclusion: |
If you are looking for a good feed neck for your autococker, with a nice custom touch. Buy this feed. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
Less than a month |
|
Paintball
Experience: |
4 years |
|
Similar
Products Used: |
Stock feedneck
clamping feednecks on other markers |
|
| Marker Setup: |
'05 WGP ProStock
CP '05 Barrel Kit - Black
Shocktech Clamping Feedneck
WGP Torpedo Drop
Halo B
Crossfire 68/4500 HP |
|
|
|
|
| Strengths: |
Fits Halo Good
Looks
Made by Shocktech
Clamps and dosent let go
Light |
|
| Weaknesses: |
None as of yet |
|
| Review: |
I just recently bought this for my '05 ProStock, saying as the stock feedneck isnt big enough for the Halo. Sure, i was able to squeeze my old Egg in there, but definitly not the Halo. Being a little upset, I turned to PB review to find a good one. I really liked the look of this one, and even though some people have complained it didnt fit their Egg, it fits my Halo perfectly. The clamp works great, and dosent seem to come loose whatsoever. Its light, but seems quite durable. |
|
| Conclusion: |
If you have a Halo, I would highly reccomend buying this. It does its purpose and it does it well. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| 3 months | 0 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
More than 5 years |
|
Similar
Products Used: |
stock feed neck |
|
| Marker Setup: |
2004 WGP Outkast
Shocktech SupaFly bolt
Smart Parts AA Freak 12"
Dye drop w/ on/off
PMI 68/4500
eVLution II w/ Y-board |
|
|
|
|
| Strengths: |
Solid construction
Easy to tighten/ loosen
Adds a nice custom touch |
|
| Weaknesses: |
Didn't accomidate my Egg |
|
| Review: |
I was a little disappointed when I discovered my loader wouldn't fit snugly into the stock feedneck, so I decided to invest in this feedneck. At $35, it seemed like a reasonable price, and I have always been a fan of Shocktech products, so I went ahead and ordered it.
When it arrived, I eagerly swapped it onto my gun, threw on my egg, tightened, and... no difference. It would not tighten enough to fit my egg's feedneck. This pissed me off to some extent, but I realized I could wrap some electrical tape around the bottom of the egg's neck, then tighten the feedneck, solving the problem. Although it's a pain in the ass and looks tacky, it gets the job done. |
|
| Conclusion: |
If you have an egg, I'd advise against getting this. Other than that, it's a solid neck, so I give it a 7, for all the mental anguish it put me through. |
|
| Rating: |
|
|
|
|
|
|
| Places to Buy | |
|
|
|
|
|
