|
|
pbReview.com / TechT Trilogy / TechT Trilogy / TechT Trilogy / TechT Trilogy / TechT Trilogy
TechT Trilogy Reviews
|
|
|
|
Number of Reviews: |
5 |
|
Average Rating: |
9.6 / 10 |
|
Manufacturer Website: |
Click here |
|
Suggested Retail Price: |
$25 |
|
|
|
TechT is proud to release the first upgrade for the autococker trilogy ever.
With the "Shaft Kit" your trigger pull instantly becomes fully adjustable.
Now you can fine tune that trigger pull to the shortest pull possible.
(the shaft kit works on all competition, sport, and pro trilogy's) |
|
| Product Availability | |
|
| The TechT Trilogy is older, so while it may be available used and in a few cases new, it is not commonly available anymore. |
|
| Places to Buy | |
|
|
|
|
|
lars1y |
|
Thursday, January 5th, 2006 |
|
Period of
Product Use: |
| Less than a month | 4 of 4 people found this review helpful.
|
|
|
Paintball
Experience: |
6 months |
|
Similar
Products Used: |
N/A |
|
| Marker Setup: |
12v Revy Hopper
WGP 50/3000psi Nitro tank
Freak Barrel Kit
Soon to be Orracle Cam |
|
|
|
|
| Strengths: |
Ease of installation
Ease of Adjustment
Great Customer Service |
|
| Weaknesses: |
The way the adjuster locks in place may strip the threads on the adjustment rod. |
|
| Review: |
This is a great product. It allows to your time your Trilogy, thus shortening the trigger pull, thus speeding up your rate of fire. The ease of installation means that anyone can do it. If your are unsure how to time your cocker buy the cocker video at the same time that you buy the shaft kit. |
|
| Conclusion: |
Buy it if you desire to time your trilogy and tune it to run at its best. I give it a 10 |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 2 of 2 people found this review helpful.
|
|
|
Paintball
Experience: |
3 months |
|
Similar
Products Used: |
WGP Stock, triligy non adjustable |
|
| Marker Setup: |
WGP Tactical Trilogy
-Halo LCD TSA Backman
-J&J Edge Elite barrel Kit
-WORR Gas 70/4500
-ANS Mini Ram
-Benchmark side drop
-Shocktech Superfly bolt
-WGP Ergo Reg
-JCS folding combat stock
-JCS weaver offset
-ADCO hotshot
-CCM delrin back block
-NcStar weaver mount bipod |
|
|
|
|
| Strengths: |
Timing adjustment (finaly) |
|
| Weaknesses: |
Makes gun complicated for those who dont know how to time a cocker |
|
| Review: |
Great kit. Lets you time your trilogy the same as a much more expensive cocker. Puts the trilogy on par with the other cockers. I found it realy easy to install, less than 5 mins. easy to adjust too, small allen wrench, and flathead screwdriver. Havent had trouble with the shaft stripping as long as the set screw is removed befre its adjusted. |
|
| Conclusion: |
Got a Trilogy? get this! |
|
| Rating: |
| 10 out of 10 | Last edited on Thursday, August 24th, 2006 at 5:47 pm PST |
|
|
|
|
|
|
|
juit |
|
Thursday, November 29th, 2007 |
|
Period of
Product Use: |
6 months |
|
Paintball
Experience: |
More than 5 years |
|
Similar
Products Used: |
A custum rod I build |
|
| Marker Setup: |
ANS GX5
Armson stealth barrel 16
Phat 14 barrel
Centerflag Uprising Trigger
|
|
|
|
|
| Strengths: |
ADJUSTABLE
easy intall 0 CO2 waste (with my method) |
|
| Weaknesses: |
Needs MORE TREAD BUT YOU CAN CORRECT IT WITH A DYE FROM A HARDWARE STORE |
|
| Review: |
You can time it easyly install it heres how:
first with a razor knife you mark it the original shaft just before the first hole of the 3 way with out touching the trigger
then you disasamble the trigger and get the original shaft out
get a preasure plier and clamp the 2 shafts aligned to the gaskets
mark it down with the razor blade all along the shaft (adjustable one)
put the trigger again and screw it
put in the trigger hole the shaft trigger piece
then from the other side from the 3 way valve insert the shaft all the way and start to screw it (the shaft has a phillips head)
and when you see the mark in the other side of the 3 way you secure it with an allen wrench
then just test it and I know if you follow this steps closely you be on your way and install any trigger almost instantly
and thats it, this is the best way that I came with with out wasting a lot of time timing the 3 way valve and all its done with out wasting CO2
|
|
| Conclusion: |
Buy it if you have a trilogy!!!! |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
Less than a month |
|
Paintball
Experience: |
3 years |
|
Similar
Products Used: |
None (no similiar products are made) |
|
| Marker Setup: |
Trilogy Sport
TechT shaft kit
ANS 90* swing frame
Sticky 3's
Richochet Apache
Pure Energy 48/3000
CP classic barrel |
|
|
|
|
| Strengths: |
More Trilogy timing adjustability
|
|
| Weaknesses: |
The rod itself is a little weak (not really an issue) |
|
| Review: |
I first started looking for an aftermarket frame to replace the stock Trilogy's 1.5 finger trigger frame. I asked around and was told that the Shaft Kit would allow me to install another frame and adjust it so the timing wasn't weird. I ordered one for $25 bucks.
When I first installed it, I noticed it was not sitting flush with the frame and determined that I had slightly bent it when installing it. I didn't expect this little rod to be strong but I was a little surprised when I bent it. Then again that is not really a major issue and not TechT's fault. Once installed I had no problems and I adjusted my trigger pull to my liking. The only thing is that I could not find the right size Allen wrench in either Metric or standard for the set scew, so I tightened it with my fingers. Once again, this is not a weakness, only my inability to find the right size wrench.
Once I had it installed I aired up and timed everything to my liking, there were no problems and it worked exactly as advertised. I could adjust the pull however I wanted. |
|
| Conclusion: |
This is an excellent product and I would recommend it to any Trilogy owner looking for that greater degree of adjustability or looking to put on a different frame. Fragility of the rod aside, the Shaft Kit has no real weaknesses and works great. I couldn't ask for more. I'll give a nine because it's not totally perfect. (still great though) |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
Less than a month |
|
Paintball
Experience: |
More than 5 years |
|
| Marker Setup: |
Cocker Trilogy Comp.
99 STO 2-Piece Barrel (12"), 14" SP All-American
ANS Delrin X5 Bolt/Backblock
ANS 90* Frame
TechT Shaft Kit
Shocktech Drop
Empire Reloader B
PE 48/3000
Empire Bottle Glove |
|
|
|
|
| Strengths: |
Adjustable trigger pull
Allows use of aftermarket frames |
|
| Weaknesses: |
Took 2 weeks to be shipped...... |
|
| Review: |
Well, it basically lets you adjust the trigger pull on a Trilogy series cocker. It let me be able to put an ANS 90* trigger frame on my cocker, so i'm pleased. The only qualm I have about the Shaft Kit is it took over 2 weeks to get to me from Tennessee and I live in Georgia. |
|
| Conclusion: |
Good product, does what its supposed to |
|
| Rating: |
|
|
|
|
|
|
| Places to Buy | |
|
|
|
|
|
