-2005 Spyder Pilot ACS
-12" J&J Ceramic
-Holds hopper on tight
-Easy to install
-None to date
I ordered this for under $30 to replace the stock feedneck on my Pilot. First let me say that anything is better then the feedneck Kingman puts on their products. I ordered this product because it looked nice, looked like it would do the job of holding my hopper securly and the price was right.
Well it did not disappoint. The Trinity feedneck holds my 12V Revvy in tight and looks great with my Pilot. For $30 you can't go wrong.
Overall a great product. I would recommend this to anyone who wants a low profile, strong, good looking feedneck.
10 out of 10
Last edited on Thursday, June 8th, 2006 at 5:46 pm PST
-Spyder Pilot ACS 05 Blue To Black
-Ricochet AK Black
-20 oz. C02
-14" Smart Parts Progressive Barrel
-Trinity Clamping Feedneck
-Dye Invision I3 Blue
~Soon To Come~
-WGP Prostock Autococker 05
-Black Dye Sticky Grip
-Freak Barrel Kit
Holds Hopper Tight
Hold - This is a clamping feedneck and does its job it can hold most hoppers unless the feedneck is to small or large. Only Problem I had with this is my old Extream Rage hoppers neck was screwed up from my old feedneck and would not fit in it.
Low and Feed - This feedneck is low and can feed balls at a fast rate so you wont be starving your gun.
Looks Good - They Come in Black and Sliver and With holes Or No Holes So it can Be a Perfect Fit and Color Match.
Durable - You can play aggressive with your gun and the hopper will never fall off and the neck will not come loose, and if it does it takes a second to tighten it up again.
Assembly - It is Easy to Change Between Feed necks on your Spyder, All you have to do is get a screwdriver and take out the 2 screws surrounding the current feedneck take that one one out and put in the Clamp and Reassemble it Very easy and takes about 1 or 2 minutes.
Great Feedneck! I highly Recommend You Buy It but Make Sure That Your Hoppers Neck Isn't To Small and You Can Always Sand It Down If Its to Big, Also See if Your Guns Neck Takes Holes Or No Holes So you Don't Buy The Wrong One
Keeps hopper very low.
Made from strong metal material.
Holds hopper tight.
Well, I got this product because I was very unhappy with my Check-it slip-on feed adapter (didn't hold the hopper tight). With the Trinity feedneck, there is a MUCH lower profile on the hopper and it clamps tightly so your hopper won't fall out, no matter what, even if you slide a lot, and it looks great to boot. It even has milled out holes on the side of it to let excess blowback come out of the feedneck.
I highly reccomend getting this product. It is a great upgrade for any Spyder. Awesome feedneck.
Light Blue Spyder Xtra, ACS Delrin Bolt, Shocktech Spring Kit, 14 inch Dye Xcel Barrel, 12 inch View loader Barrel, Trinity Clamp Feed Neck, Trinity Quick E-Trigger, Trinity 7 Degree VA, Macroline Fitting, WGP Uni-mount, C.A.M.D E-Frame, 12 Oz Co2.
Clamps your Hopper, also the hopper is not sticking way up
None for now...
This clamp feed neck is just sick, (sick = cool) its black easy installation holds your hopper tight so it dosent fall off......and thats pretty much nothing to say about much. it comes in chrome polished or not poslished it fits any spyder marker with holes or without any. it pretty cool since your hopper isnt stick way up like those 3 dollars screw feeds neck and keep braking and your hopper is much lower to keep a lower profile and its says Trinity on the feed neck.
Since this is my first Clamp feed im happy cuz i atleast have one YAY!!!! so im ok and i would recommend this for anyone or begginer.
i recently got this feedneck because my smokestack wasn't very good...this feedneck was great...very easy to put on the gun easy to use and it can pretty much adjust to any hopper that you have (halo, egg, etc). I purchased the feedneck from actionvillage...it came quickly was ready to go...i just screwed it onto my gun and it was ready....i put my egg on it tightened the feedneck...it didnt move at all.
If ur looking for a good cheap feedneck buy this one...very reliable
Spyder Imagine 04 - Green
- 32 Degrees Spyder Spring Kit
- Spyder Rodeo Stock Barrel
- Trinity Spyder T-Lock Feed Neck - Black
- WGP 50/3000 Worr Gass Steel HPA Tank
- PMI Pure Energy Air Tank Cover - Red - 68ci
- Smart Parts Fill Nipple Cover
- ViewLoader eVLution 3 - Black
- Price (better than most)
- A little small for an eggy
I bought this feed neck so my hopper wouldn't fall off, I mean my elbow I had on it did this to o but it made your hopper stick up about 20 feet.... After about a month of use now I can say it's a great feed neck, it's solid easy to take apart and clean and looks cool! Although there is one bad thing about this hopper, it's a little to small for an eggy... which is not uncommon for feed necks, but my suggestion is if you have an eggy but a little tape around the feed neck and it will fit!
A good feed neck for a cheaper price than most, a must have up for any Spyder!