|
|
pbReview.com / Spudnuk'l Nylatron LP Vision Bolt / Spudnuk'l Nylatron LP Vision Bolt / Spudnuk'l Nylatron LP Vision Bolt / Spudnuk'l Nylatron LP Vision Bolt / Spudnuk'l Nylatron LP Vision Bolt
Spudnuk'l Nylatron LP Vision Bolt Reviews
|
|
|
|
Number of Reviews: |
1 |
|
Average Rating: |
10.0 / 10 |
|
Manufacturer Website: |
Click here |
|
Suggested Retail Price: |
$25 |
|
|
|
This is our bolt for the new cocking system from Kingman International. This bolt will fit the Icon LED, Victor, Imagine, or Esprit designed for the highest possible performance.
Most impressive bolt we must say. Can not find anything like it for the same price.
* New Features: Nylatron-- Nylon and solid lubricant combined
* Milled ball detent groove
* Slicker Surface
* Greater self lubricating properties.
* Highly resistance to oils, which means no swelling!
* Anti-Ball paintball "hop" design
* High Flow Bolts for Low pressure operation
* Oring grooves to control blowback (if necessary) |
|
| Product Availability | |
|
| The Spudnuk'l Nylatron LP Vision Bolt is older, so while it may be available used and in a few cases new, it is not commonly available anymore. |
|
| Places to Buy | |
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 2 of 3 people found this review helpful.
|
|
|
Paintball
Experience: |
1 year |
|
Similar
Products Used: |
Stock aluminum bolt |
|
| Marker Setup: |
Spyder imagine 04, cp one peice 14'', 50/3000 worrgas, macrokit, WGP Ergo reg, Springkit, Drop forward, Dye stickies, CCM Feedneck, Spudnuk'l LP Nylatron bolt |
|
|
|
|
| Strengths: |
In Review |
|
| Weaknesses: |
None |
|
| Review: |
Ok, I said I would post on in here about the spudnuck'l bolt when I get it. I just got it. I put it in my gun without o-rings and instantly realized the much better fit(over my stock bolt). I shot a couple of times and the first thing I realized was how much quieter it was than before. It drastically reduced the loudness, I would have bought it just for that if I knew it would quiet it this much.I shot a few more times and noticed that there was NO blowback in the feedneck. I did the tissue test and it stayed in place, which before it would shoot it into the air. I had my reg set to just high enough to recock with the stock bolt. I kept lowering it with the spudnuck'l until it wouldn't recock. I was able to screw in my lower my pressure by a lot, not sure exactly the amount, but it was about 3 turns. I took it outside with a few balls in the feedneck and shot. They all stayed inplace, which confirmed that there is still NO blow back. i shot a few more balls and confirmed that with balls it is MUCH quieter than before. My stock bolt made a loud PING PING PING, and it was just very loud. This bolt completely eliminated the Ping, and quieted the entire marker by a lot.
Thats all the testing I've done so far. But So far all is great.
1. Eliminated blow back with OUT o-rings
2. Aloud me to lower my psi by a large amount
3. Made my gun Very quiet compared to before ( and I mean a lot quieter)
Strengths:
*Eliminates all blowback out of the feedneck without using the o-rings providec
*It is lighter, and allowed me to lower my OP considerably
*made my gun drastically quieter.
*No lubriction needed
*Has grooves for o-rings if needed
*Cost: only $24.95 Including shipping |
|
| Conclusion: |
For only $24.95 this is a steal. This is the best bolt for any spyder. It does everything you'll want it to, and more for a low price. Get it, it's the best. |
|
| Rating: |
|
|
|
|
|
|
| Places to Buy | |
|
|
|
|
|
