I bought this along with an NDZ Diamond body and a TechT L7 bolt. I did have an issue where the middle mounting screw was not quite lining up with the body (see my NDZ body review) but I am not sure if it was the fault of either of the NDZ parts (nor am I sure that it was not). Either way, it was very simple to take a couple swipes with a file and remove a centimeter or two of metal to get everything alright.
Freak w/AA tip
Crossfire 68 4500
Halo b w/rip drive
Great replacement for the stock especially when you strip out the feed neck threads.
None that i have experienced
When my feed neck threads stripped out, i got the new designz breech to replace the stock. This works the same as the stock the only difference is you can get different colors. The thread for the barrel are the same as stock so you don't need to buy a new barrel.
If you have a problem with you breech and want the same threads for the barrel get this
Sp ION w/ cp reg. firebolt, qev, 16'' ultralite, cp on/off asa,cp rake(not recommended)(will have sling blade i have had this HIGHLY RECOMMENDED)hybrid contract killer grips,q-loc clamping feed
Just a breech i suggest you have one to use your gun
I was playing what you might call speedsball in my fairly large backyard with bunkers......from the break i ran and dove into the snake,and without realizing it, smashed my halo off my shoulder.my halo was fine but as i came out to fire, i did not see any hopper or clamping feed on my gun so i immediatly called myself out and checked to make sure my shoulder was alright...i guess you can say that it took alot of force but yuo do need this so buy it
I would recommend this product, simply because you need this to hold the bolt,eyes, and everything else that is in out in your breech. i do not give this a ten simply because the aluminum(i believe) is too soft and weak