This kit is designed to convert you Autococker® into a pump action paintball marker. Pump kit is threaded to fit 2k threads (standard on all models from the year 2000 and up).The kit installs in minutes and requires no perminant modifications to the marker.
The PMP Industries Autococker Pump Conversion Kit is newer, so it should be commonly available, both new and used.
WGP Autococker Trilogy Pro
48/3000 PMI Tank
Proto E.L Googles
PMP Ind Pump Kit
VERY LITTLE scraping under the barrel.....It's won't damage the marker
This is a great pump kit. Its not very heavy and has a nice smooth stroke. In this kit you get a new pump arm, guide rod, pump handle and THE RETURN SPRING IS NOW INCLUDED. This is the only pump kit for the trilogy but if there were other this one would blow them away. It is a great kit and i highly recomend it. It is easy to install and you can put it back to semi in 5 min.
scrapes a little on the barrel (tiny bit)
No return spring. (You can easily DIY)
I ordered this pump Kit from http://www.pmpind.com/ on Christmas Day (Monday). That Saturday, I received the pump kit in the mail. It placed in a Priority Mail box, Surrounded By newspaper, with 2 Free stickers :) The total cost was ~$42 USD shipped Via usps priority mail
Installation was Easy. Just pull off the hoses off the "front block" and unscrew everything in the front. Then Remove the Beaver tail, take out the bolt, cocking rod, and the old push rod. Screw in the rod where the Reg in the "front block" use to be, and then screw the push rod onto the grip. Slide it onto the gun, and put the back block on. Put everything back together, and your done!
Just like any other pump cocker kit, it works the same way. Pull back, push forward, shoot, do the same to shoot again.
In the weaknesses, i mentioned that it scrapes a little. Very little, with the stock barrel. This may also restrict your selection in barrels?
To make your own return spring system, simply take a spyder bolt spring, and put it into the grip. If you want less resistance, just cut the spring.
I would suggest getting this kit to convert your Trilogy because it is light, and easy to install.
Its relatively in-expensive. Just make sure when you choose your barrel, you choose one that wont rub against the grip!
Side to side movement of pump handle due to lack of guide rod
This is a good pump kit. It's the right price to quality ratio. I ended up upgrading to a CCM pump kit cause I'm a perfectionist, that must have bad ass sh*t. But there really is nothing wrong with this kit. It does the job well, just not as well as other more expensive kits. Nothing really more to say other than if your looking at this your moving in the right direction... PUMP you'll never go back
The Price is Right.
If your looking to get into pump play for the best price to quality ratio, this is your kit
Giving it a 7 cause if a CCM is a 10 there has to be some room in between
2k2 Autococker with PMP Pump kit and a teardrop barrel
-SP Impulse loaded
Easy to install, even if you know nothing about cockers.
No spring or second guide arm
As I stated in my key strengths, this pump arm is very easy to install. Simply take off your front block and pneumatics and screw it in. It has a very nice look and the handle feels very nice and durable.
Its downsides are the lack of a return spring (which isn't completely necessary, if you just hold the pump arm all the way forward then you won't have a problem, i use a spring out of my old spyder) and it only has the pump arm as a guide. Because there is no second guide, the handle has the tendency to turn if you aren't careful which can be bad. This, in a way, can also take away from the smoothness of the pump which is very nice when held straight.
I definitely recommend this product to a person looking to turn their autococker or even their trilogy into a pump (yes there is one for the trilogy). the lack of a second guide isn't enough of a reason to pass up this very cheap pump kit.
9 out of 10
Last edited on Wednesday, February 14th, 2007 at 3:10 pm PST
- t-lock feed neck
-roller baring trigger
-trinity anit chop air efficient bolt
spyder xtra stock
pmi tracer stock
No return spring
rubs a bit on barrel (depends on your barrel).
theres not a whole bunch to say, i would jsut love to thank pmp ind for making a nice looking, smooth working, easy to instal pump kit for the trilogy. and if your going to buy a pump kit for your trilogy this one is great!!
CONSIDERING ITS THE ONLY ONE OUT THERE. =] HAPPY BUYING
But because its is inexpensive, looks nice, works well, smooth and looks sexy