The Rampage Shocker board gives you the MOST comprehensive controls over
your Shocker - EVER. Over 50 Setpoints along with some new features such as
the built in battery meter that indicates your battery's strength on the
LEDs, one-touch firing mode selection, marker stats including Lifetime Shot
Counter and Five fully configurable profiles that allow you to instantly
reconfigure your marker for different events. Another feature built into
the Rampage Shocker board is the dedicated solder point for attaching the
Pulse Loader RF Chip!
The Rampage Shocker board comes with 8 base firing modes including our
Rampage 1 & 2 (3-step define your own ramping), PSP, NXL, Semi, Burst,
Reactive and true Full Auto. When in firing mode, simply tap the Power
button to cycle through the different modes.
Some features carried over include our Trigger Trainer mode with Peak and
Average pull rate displays and our exclusive iFault eye control for the most
dependable eye operation anywhere.
The Rampage Shocker works with Break-Beam and Reflective eyes so it will
work in virtually any Shocker including the Nerve!
Easy to use
· Four separate LEDs make programming easy and intuitive
· Press and Hold the Power Button at Startup to display the battery strength
- Release the Power button and you’re instantly in firing mode!
· Just tap the power button on the back of your marker to change firing modes.
Unmatched Marker Control
· Firing Cap (Capped or Un-Capped)
· Max Global Rate of Fire with Eyes ON (10bps to 40bps)
· Max Global Rate of Fire with Eyes OFF (10bps to 20bps)
· Programmable Burst Mode Rounds
· Programmable Reactive Pull Rounds
· Programmable Reactive Release Rounds
· Programmable Tournament Mode
· Programmable Firing Modes Enabled or Disabled
· 12 Breakout Modes
· Programmable Power Up Profile (5 Profiles)
· Adjustable Trigger Debounce
· Adjustable Anti Mechanical Bounce
· Adjustable Solenoid Dwell
· Adjustable Dwell Modulation
· Adjustable Bolt Stick Dwell
· Adjustable Bolt Stick Reset Time
· Adjustable Breech Load Delay
· Adjustable Bolt Return Delay
· 5 Eye Modes works with Reflective AND Break beam Eyes
· Programmable Auto Shut Off
· Programmable LED Controls
· Programmable Audio Controls
· Programmable 3-Step Ramping with Rampage 1 & 2
- Each Mode has 13 Individual Setting with over 18 TRILLION Combinations!
· Built in Battery Meter
· Trigger Trainer Mode
· APE’s Exclusive iFault™ Control
· EZ Trigger Programming
· Internal Tournament Lock
· Pulse Loader Ready with dedicated Solder pads!
· 5 User Programmable Profiles allows you to Instantly Reconfigure your marker
· Built in Stats allows you to track Shots Fired, Trigger pulls, Peak pull rate and Battery strength
· User selectable Eye type works with NXT and SFT Shockers
· Completely Trigger Programmable!
· Free Lifetime Code Updates!
The Advanced Paintball Electronics Rampage Shocker Board is newer, so it should be commonly available, both new and used.
APE Rampage Board
Smart Parts SuperCharger Bolt
Smart Parts SuperCharger Firing Can
FreeFlow Bolt Guide
FreeFlow Bolt Sleeve
CP Inline regulator
NDZ Roller Blade Trigger
CP rail & on/off
Hybrid Hedloc Feedneck
Tons of features
Easy to use
The manual is very well put together
Could be hard for idiots to use...
Previous to purchasing this board, i read a review by Andy (owner of www.zdspb.com). In his review he mentioned the many setpoints, the many modes, and the many other features. His review made it seem like this board was going to be difficult to understand. In fact, it is just the opposite. The manual has detailed descriptions of what settings do what, walk-through tutorials to help learn how to adjust settings in each of the main menus.
The board itself is constructed nicely and seems to be sturdy enough to hold up to the abuse of tournament paintball. It is not like a predator board, which in my experience is a little sliver of board with some resistors and a chip on it. They put all of the components on the front of the board which, according to Andy from www.zdspb.com, was most likely done as a cost saving measure.
Setting up the board is quite easy. It comes with factory settings, so it can be used as a plug and play application. For those who are looking for a more fine-tuned gun, there are many different settings you can adjust to make the gun shoot just the way you want it. To help with programming the board has 4 individual, colored LED lights. Each light is a different color. The board also makes use of the LED on the upper (solenoid) board. In addition, there is a speaker on the board that chirps to signify different actions (backing up to a different menu, a value for a setting, etc...). In addition to the multiple firing modes, there are also 5 different adjustable user profiles. You can set up different modes and settings for each profile, and set the board to start on which profile you want.
One of the best features of this board is the price. This board gives you so many features for a price that wont make you think twice about buyint it. At $99.95, this board has just as many features as a $149.95 board, and more.
For the price, ease of use, and amount of features, you cannot go wrong with this board!
The Shocker Stock Board (With Eyes) [Which i'll never use again]
2006 Smart Parts Shocker SFT [With Eyes]
All American Barrel
APE Rampage Board
Halo B + Empire B2
The Modes and programming ability
The Easy directions that can look overwhelming-they arent
Factory settings will have to be modified / programmed
The APE Rampage is amazing. Forget about the virtue. This thing is beautiful. 4 Bright LED's indicate the mode and aid the programming. This board has 8 base firing modes and near unlimited setpoints which allow you to program the way the board ramps and such - long explanation trust me they rock. For the cash [ I think i payed about 100 with shipping for it ] you CAN'T GO WRONG. There really is about nothing you CAN'T program on this board....Check out the downloadable manual at goapeonline.com. It may look like no one can follow it but i am awful at following directions - believe me - and i found it very easy because of the step by step directions. In other reviews and for the few problems the board has that i noticed in forums the tech support at that link is amazing as well.
Anyone with a shocker that wants to have a ton of fun with modes / programming and or wants to enter a tourney NEEDS this board. For the price you can't go wrong.
-One happy customer : )
Popped this board into my shocker and it worked right out of the box :] I needed to set up Millennium ramping which wasn't really all THAT logical but with some APE assistance I managed to do it and its awesome! Love the 3 step ramping. For those that like to fiddle around with settings, u can set up 2 ramping modes in 5 profiles giving u 10 personalized settings!! Programming is a bit different than in most board but doing it a few times and you get the drift.
All in all an awesome board. You get all the options that you get with Tadao, Virtue and Predator plus more for $50 LESSSSS!!! You cant go wrong!
Toxic Green Smart Parts Shocker SFT
Ape Rampage Board
Locking Feed Neck
Stiffie Switch Barrel Kit
Halo v35 Hopper
- Easy to Install
- Works Right out of Box
- Basics are Easy
- RIPS paint
- Advance settings can be tricky to set up.
Got the board and installed it with in 20 mins of it arriving. The only issue I had with Installing the board was the pins in the marker did Not want to come out. Had to tap it with an awl and allen key.
Once in, I had no issues what so ever. When out for a day of woods ball, played for 8 hours. Tested all the modes..... Rips paint in semi. 3 ball burst is nice. I really like the responsive mode, Shots once when trigger pulls and once out when trigger releases.
My friends quickly banned me from using full auto ! which honestly i didnt mind since i waste a TON of paint with it.
Now I just have to figure out how to get it tournament legal for speed ball....
Great product Highly recommend it. I give it a nine just because i havent used to many other boards to compare
Shocker NXT (stock), Guerrilla HP 68/45 tank, APE Board
Easy of changing modes of fire, programmable, and cost
Complicated programming until you understand the conept APE uses
I have always been a Tadao man, but after purchasing a Shocker NXT and Tadao not have its M7 board out yet I thought I would try an APE board. The cost was cheap...I got mine of Ebay for $79.99 and board arrived in two days. Installation was a breeze as with all shocker boards. Now here is the tricky part. The instructions for programming this board look overwhelming. There is over two pages of how to setup the marker's different firing sequences. However, you can just plug and play unless you are using an NXT. Of course, the NXT is a breakbeam eye configuration and the APE default settings are for reflective eyes. So this forced me to enter into the programming to change it. I was a little worred because the instructions were so complicated, but after a few read throughs I finally understood the directions and it was quite easy after that. On page 3 of the manual is a demonstration of explaining the 'tier' system of the programming which finally made it all click with me on understanding the programming. Good job APE! Last night I finally was able to use this board in practice. Wow, this thing rocks!!! You can change the firing modes with just one push of the power button. The eye logic worked perfectly and I never chopped a ball.
All I can say is for less than $100 this board is the best! Awesome! I would suggest taking a look at this board before considering the others. You won't be disappointed.