These triggers are a direct replacement trigger with no modifications needed. You just pull your stock trigger out and put this one in and your ready to rock. These triggers are high quality work and are amazing to use. He offers a couple of different profiles that are great. I tested the barb and the talon in my closer and they both performed perfect. The real nice thing about these triggers is it uses the frame as the front stop not the lpr like most aftermarket triggers do. I have used all of the aftermarket triggers out there Critical, Power, Ect. and these triggers are by far the best. These triggers are made of high quality carbon fibre. So if you are looking for a new trigger for your Marq I would highly recomend getting one of these triggers you wont be disappionted.
The Acid Custom Carbon Fibre Triggers are newer, so they should be commonly available, both new and used.
I have been playing paintball for the last 12 years on and off and I have used just about every trigger shape and brand there is.
Techna would be the closest to compare to this trigger.
Bob Long Vice
4C Eye System
Empire Magna with RF
-Very Well Made
-Hardly Any Side to Side Play
Only found one small problem, its in the review below.
I contacted John a few weeks ago about getting a trigger after I saw the one he made for my cousins viking. I knew I wanted to get the scythe shape but I am rather picky when it comes to how far the curve of the trigger actually sticks out. I had a critical DM6 trigger in the past and loved the pre-travel adjustment as it let me set how far the curve of the trigger stuck out. I pm'd john asking him about the difference in the shapes he had and if he could add a pre-travel screw to the top of the trigger. He wrote back telling me about the differences in the shapes and said he could add the pre-travel screw, no problem. So I put in a order for the "Talon" shape with the pre-travel adjustment screw.
The trigger came nicely packaged with the trigger in a bag, instructions saying to contact john if I had any problems and a acid sticker. On the trigger you get all the set screws, a reverse magnet system and of course dual ball bearings.
To install the trigger I simply had to take the trigger pin out, pull the stock trigger and slide the acid trigger in.
To install the magnet system just open the grips, unscrew the stock spring mount and slide it out through the grip opening. After checking the magnet to insure which way to put it on, put a small drop of super glue on the mount and stick on the magnet, perfect fit.
With the pre-travel screw I am able to adjust the trigger back and forth alittle under a 1/4", which is a big difference in how it feels.
The overall workmanship on the trigger is excellent, you can see the attention to detail. I have owned two techna triggers in the past (one timmy and one DM5) and will say that is it right on par with that kind of quality.
After I got the trigger all setup and adjusted to my liking I put about 8 pods of reballs through the gun. This trigger rips!! Return speed is extremely fast thanks to the light weight and magnet system. It is extremely easy to hit high rates of fire and keep it consistent. There is very little side to side play, which makes it that much easier to walk.
Only con I found in the trigger was that the trigger stop adjustment screw worked its way out alittle and stopped the trigger from activating the switch after about 3 pods. No big deal though as I simply took the screw out, added some blue locktite, put it back in and waited about 15 min for it to dry. I put about 5 pods through the gun after that and it didn't move at all, simple fix to easy problem.
Overall I HIGHLY recommend picking up one of John's Acid triggers, well worth the money!
Extremely nice trigger, perfect fit and function, excellent customer service, what more could you ask for.