* Flux wraparound grips
* 2 way adjustable two finger trigger
* Includes 9.6 volt rechargeable battery and charger
* Semi auto, full auto, and burst firing modes
* Shoots up to 18 BPS
* Will fit the Spyder MR1 marker
The Kingman Spyder 2007 E Trigger Frame is newer, so it should be commonly available, both new and used. Check out the Places to Buy links below for places to purchase it new.
07 Spyder Xtra
14 Inch SmartParts Linear Barrel
07 Spyder E-Trigger Frame
Looks pretty nice
Comes with batt. and charger
2-way adjustable trigger
Kinda has a bit of bounce
Trigger moves sideways
Well, I picked this up for $75 at badlands paintball. I put it on my 07 Xtra and it fit like a charm. This trigger frame is really fast 18 bps max. Has a bit of bounce though and only 3 modes of fire, semi, 3 round burst, and auto. I recommend this trigger frame if you're getting tired of you mechanical trigger frames. Looks pretty nice.
I would get this if you want to replace your stock spyder mech frame, I'l give it a 9/10 just because of the bounce.
PsychoBallistics Large Drop Forward
Low Pressure Block
Dead On Regulator
Easy to use
Grip has a gap in the back
Setting/Off and LED have gap
Great frame, perfect size, very comfortable, good speed but it has gaps all around it. You must not drop this thing in sand, water, dirt, mud or any combination of. It has 3 settings (semi/burst/auto) and is very simple to use. I would recommend this as a great way to improve your BPS on a stock marker. Check Ebay for new ones around $35.
I love it. If I could find some grips that would fit this thing to protect it against jamming, I would rate it a perfect 10.
9 out of 10
Last edited on Monday, February 18th, 2008 at 2:39 pm PST
stock trigger on all spyder e markers
2010 Proto SLG
Ninja 48 ci carbon fiber hpa tank
Empire Prophecy LTD
2 piece Proto barrel
Spyder E99 avant
EVlution 2 hopper
Pure Energy hpa 3000 psi
SmartParts Teardrop 14 inch barrel
or Smartparts Progressive 16 inch Teardrop barrel
Fast enough for beginners (15-20 bps)
Easy to assemble
Key modes (Semi, Burst, Auto)
A bit expensive
Jams a lot
Not enough speed or modes for an experienced player
I purchased this item at my local shop for about 100 bucks. When i got home i tried to put it on my Spyder E99 Avant but i had to get another dropforward to get it to fit. and then i had to get a new a.s.a. valve to fit my new dropforward. and then i had to get a new hose to fit my a.s.a.. and you get the point. so when i took it out to test at my local field it worked great for a few games and then it started to jam. and jam. and jam.i even had to take apart my gun in the middle of the game to get it to unjam. later i realized it was a huge waste of money so i took it all back and bought a new pod pack, an Invert Avatar mask for 35$ (see my review on that too) , and went paintballing some more with my stock trigger.this trigger is chances are, gonna make you think its so much better but in the end you will be disappointed.
this trigger does improve your gun but not enough for what it costs. in my mind anyone who wants this trigger should just stick with the stock one because chances are, your stock trigger is better.I give the Spyder E Trigger kit a 3 out of 10.
VS3 with vs2 trigger
Empire Vents Avatar with dark thermals
88 and 68/4500 Pure Energy with DYE covers
Invert 3+2 Loaders
Invert Digi Woodland Outfit
Spyder MR 1 with rear cocking mod
14" j&j barrel
Pure Energy 16oz tank
Pure Energy 20oz tank
This is an ok trigger. I got mine on ebay for $40 with shipping so it was hard to pass up. It is fully adjustable so you can make it a hair trigger and you can really shoot some paint with it. I have used it about 6-8 game days and have never had any problems with it but one. The on/off switch broke. It was my fault because I got sand in it but it is not a very good design. It should have a push button instead of a slide type switch. One click up is semi, two clicks up is 3rnd burst, and all the way up is full auto. None of the fields I play at allow full auto so I just took out the jumper and that makes it semi all the time no matter what setting you put it on. I'm sure you could change the board in it but why bother. It's not like the MR1 is going to be shooting 20 bps. I can throw paint good enough with the semi.
Its good if you want to up to an electric feel trigger and shouldn't break the bank. I'll give it a 6 just because I have to use an allen wrench to turn it on now.
2-n-1 spyder compact, java expansion chamber, shock tech LPC, 2007 E trigger, kingman remote system, Edge 12" barrel mil .688, 20oz Co2 tank, field strip screws, shark rail, micro line kit, thumb adjuster
Price, 3 modes of fire(semi, burst, full auto)
Gaps in grip
I bought this handle off of Ebay, couldn't beat the price at $40. Fit was real nice onto an old spyder. But because it was an older model I had to buy a new ASA set up. Seems to half cock when firing on full auto but will work when needed. Burst and semi work great. Looks better than stock and feels fuller in the hand. Comes lose sometimes from rapid firing, but its nothing a little locktight cann't solve.
Buy it! if your looking to upgrade from your stock trigger. But keep in mind that if your running an older model you may have to update your ASA. And now that your gun is firing upwards to 20bps you mite want to get a better feeder.