WarGear Clear Cyclone Housing is designed to replace your stock cyclone housing to allow you to easily see if you are running low on paint, have broken paint in your cyclone, to show off your new WarGear Paddles or to just be able to check out the Cyclone Feed System in action in a way not possible before. Available with or without the clear bottom plate. Fits all Tippmann Cyclone Feed Systems.
Product Availability
The WarGear Paintball WarGear Clear Cyclone Housing is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Places to Buy
No Stores
Sponsored Links
Write a review and share your thoughts with other paintballers.
Brakes when they said it couldn't
Screw ports aren't threaded
Bad Screws
Review:
I wanted it because it looked good and it would hopefully help me diagnose some cyclone issues I was having.
It fulfills those two purposes but the advertisment for it on wargears website and my local retailers website said it is "Made of Nearly Indestructible Material" and mine is currently broken in three different places.
One of the breaks is a split in the bottom plate of the housing which doesn't affect performance but still is not desirable in a near new indestrucable product. The other two breaks actually prevent my cyclone from even functioning, one is the nubbin on the bottom plate that holds the rachet in place and the other is the wall of the plastic slot that hold the wire bracket.
The screw ports that hold the bottom plate aren't factory threaded so if you don't have a dye and tap set you'll have to use the screw wargear provided to self thread the holes, and they're not very good screws so you'll probably round the heads off.
Conclusion:
Looks good, but thats no use to me when its broken and doesn't work.
Rating:
1 out of 10
Last edited on Saturday, April 4th, 2009 at 1:35 am PST
