Dye Rotor Speed Feed loader lid. The Dye Rotor Speed Feed will allow you to quickly load paintballs into you loader. The Dye Rotor Speed Feed Lid has been designed to easily allow paint into your loader and keep them in. This was not designed like so many of the other cheap speed feeds. If you have a Dye Rotor, you need to get the Dye Rotor Speed Feed.
The patent pending Rotor Speed Feed system eliminates the need for a traditional flip top lid. Installation is quick and simple as the quick feed system installs between the top shell and the carrier. Simply unscrew the carrier screws on the underside of the top shell, place the Dye Rotor Speed Feed in position and secure it in place by re-installing the carrier back onto the top shell. Made from a combination of soft, flexible material that allows paintballs to freely feed into the loader and a more rigid material that prevents paintballs from falling out, the Dye rotor speed feed system is the answer for those looking for the best way to re-load and stay in the game.
The Dye Dye Rotor Speed Feed Lid is newer, so it should be commonly available, both new and used.
Etek-2 ego w/ zick kit
48/45 DXS carbon fiber tank
Doesn't hold paint well
I have used this product on my rotor for almost a year now. It really helps with reloading quickly on the field. The first few months of it's use it held paint pretty well, only losing a few balls here and there. After a couple of months, It began losing balls more frequently. what was one or 2 became around 7 or 8. Another drawback is the fact that unlike other speed feeds, you cant remove the speed feed easily to take out balls.
This speed feed gets the job done, but you tend to lose balls in the process. I suggest getting another speed feed that will hold balls better.
Dye Rotor, Viewloader VLocity, SL74 barrel kit(obviously not on the luxe). 45/45 crossfire tank.
Ease of install, simple design, effective.
Thin, might have problems with extensive wear, idonno.
i put it on my dye rotor, and the install was quick and easy. it holds the
paintballs in without hurting the ease of podding during the game. i like using
a lid. thats just me, but i tried it and i like it alot. it fits the hopper look very well.
good job Dye! another one for the books!
If you got a rotor, and you wanna load faster, dont blink, just buy it.
PM8 with a deathstix barrel
It's very very easy to install and looks great
Easy to install
Bends in over time
The quick feed is awesome brand new. But over time it seems to wear and bend in stoppin u from filling the entire rotor. I mean dont get me wrong it work amazing new and looks awesome but once its a rainy day your not gonna want it. Other then that is great for speedball players.
I would recomment this product just make sure u keep your lide with you so you can change it out when it bends in or a rainy day.
Broke out 2 teeth the second time i used it. I got a replacement and it did the same thing the day i got it . So over all used two of these speed feed broke both in under one case of paint expected better of Dye. As stated do not buy one the crows are out much better feed system.
Woodsball: Tippmann A-5 e-Grip with Saw stock, TechT full cyclone upgrade, TechT Fang trigger, TechT Zick kit, Wargear Cyclone housing, Ape Rampage Board, Tippmann Straightline, 68/45 Guerrilla Air.
Speedball: Dm9 with critical trigger, Bwing bolt, Oled Virtue Board, Dye Rotor, 68/45 Dye throttle.
The Dye speed feed is extremely easy to install. Just remove the five small screws with your Allen key, remove the top lid and slap it on!
The speed feed is great at first but after it's worn down, it becomes rather frustrating.
What I mean is, that after around twenty to thirty loads, the rubber holding the teeth starts to wear down causing the teeth to break off when you're in aggressive situations.
I usually take three new speed feeds with me to the local field to save me the frustration and can later on sell the used feeds for $5 to make some money back.
Edit: Forgot to say that after your first seven to ten loads, you'll need to shake your gun around a little so that the paintballs fully fall into your hopper. A minor inconvenience.
All in all, this is another great product from dye and I'd highly recommend it to anyone using a rotor if you want somewhat of a faster reload!
8 out of 10
Last edited on Monday, May 4th, 2009 at 11:22 pm PST
Invert MiniDye Rotor, with Quick FeedVirtue Board14"Nightstick68,3000 pure Energy Tank
Easy to installKeeps paint inside the hopperSexy
Hard to close lid with 200 balls.
I picked this up just to help me say i have the best hopper out there, and i do!! The rotor rules and the Quick Feed doesn't dissapoint it rarely lits paint out the lid, and it looks good. If you use the dye lock lids it's hard to fit all the paint in there, and get the lid to close, so stick with the 160 round pods. in order to fit the full 200 balls you have to jam them in there and shake your hopper around.
This lid rules does what it's suppose to, and looks good to.