Hot Deals
More...
|
|
pbReview.com / KAPP Colored Trigger Plate / KAPP Colored Trigger Plate / KAPP Colored Trigger Plate / KAPP Colored Trigger Plate / KAPP Colored Trigger Plate
KAPP Colored Trigger Plate Reviews
|
|
|
|
Number of Reviews: |
5 |
|
Average Rating: |
3.8 / 10 |
|
Manufacturer Website: |
Click here |
|
Suggested Retail Price: |
$27 |
|
|
|
|
|
| Product Availability | |
|
| The KAPP Colored Trigger Plate is older, so while it may be available used and in a few cases new, it is not commonly available anymore. |
|
| Places to Buy | |
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
Similar
Products Used: |
Stock Plate |
|
| Marker Setup: |
Vert 2k2 cocker(green)
Palmer Micro Rock Regulator(Nickel w/ black wing knob)
Shocktech RAM(Black)
Belsales Hollow Point 3-way(Chrome)
clear hoses
Benchmark Frame w/ Built in Beavertail(Black)
Belsales "Equalizer" Roller-Sear
[KAPP plate, or polished stock plate, whichever is least evil to me]
KAPP spring kit
{Other Shtuff}
AKALMP Sidewinder Inline(Black)
DYE Excel Barrel 14 Inch(Black)
Shocktech Supafly Bolt(Black)
CP Flame Drop-forward(Black)
KAPP Twisted Cocking Rod(Black)
|
|
|
|
|
| Strengths: |
Shiny
Colorful
Smooth |
|
| Weaknesses: |
I think they did some bad measurements, cause this thing doesn't fit on the gun. It works fine in the frame itself, but once you screw it on the gun it won't move. I was thinking this might happen, sorta glad my last post for this is gone. Now that I look at it though, it sucks. Don't buy it, unless you have a wierd trigger frame that needs a big plate. |
|
| Conclusion: |
This thing is no good, it doesn't fit in a standard trigger frame. I gotta polish my other trigger plate now, and I don't get the cool colors, damn. Someone should tell this to KAPP, that plates too big, make it shorter. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
Similar
Products Used: |
Stock and ANS |
|
| Marker Setup: |
01 Cocker, 14" Freak, Evolution bolt, Drop forward, 12v Revy, 68cu 3000. |
|
|
|
|
| Strengths: |
Looks cool.
Light. |
|
| Weaknesses: |
I have not been able to get this plate to work. It won't work with an either of the aftermarket frames I've tried(Older dye and ANS Quickfire). Both frames have an extra step on the bottom of the plate that this doesn't have. I assume then that you have to use it with a stock frame(or maybe some aftermarkets use this design). Another problem I found was about the only place the anodizing wasn't perfectly smooth was right where the sear rubs. This doesn't make a whole lot of sense to me. It may just be the one I got. Also, I could not get this to work with my stock frame. It seamed that the whole plate was just too tall. It worked alright until I tightened down the grip frame screws. With those tight, it would hardely slide, and wouldn't return. |
|
| Conclusion: |
I'm extremely dissapointed with this product. I have used many other KAPP products, and been very happy with them. For this reason, I was really suprised that they would release something like this. Again, maybe it was just the one that I got, but I basically ended up with a $20 piece of black anodized aluminum. If you do decide to get this, make sure you take a look at the sear contact point to make sure its smooth. Also make sure that it will fit the frame you are using. I'm giving it a 5 because it may work decent with a different fram. |
|
| Rating: |
|
|
|
|
|
|
|
Unregistered User |
|
Saturday, August 11th, 2001 |
|
| |
| 1 out of 1 people found this review helpful. |
|
|
| Strengths: |
lets see, how to rate a trigger plate........hmmmmm looks good on my cocker. Works fine as long as you oil it BEFORE you install it so therefore the whole thing is oiled. |
|
| Weaknesses: |
it's a damn trigger plate for god sakes.......even though i guess it could be a little bit thicker on the actual trigger where your finger goes......... |
|
| Conclusion: |
it looks coo' but i'd rather get a shocktech........... |
|
| Rating: |
|
|
|
|
|
|
|
m_0r30 |
|
Friday, December 31st, 2004 |
|
Period of
Product Use: |
Less than a month |
|
Paintball
Experience: |
2 years |
|
| Marker Setup: |
2K3 Sniper with lots of upgrades... |
|
|
|
|
| Strengths: |
Shiny, light... |
|
| Weaknesses: |
The think isn't the right size. |
|
| Review: |
Bad measurements. Doesn't fit my frame. Waste of time and Money. I spent about 2 hours trying to grind down the parts that were rubbing and still it's rubbing very rough. Doesn't fit standard frames. It's also quite rough. I tried to polish it but still it's very very rough. Do not waste your time like I did trying to fix this to fit on your frame. I'm very very disappointed with this product. |
|
| Conclusion: |
Do not get this sear, it may be annodized and nice looking but it doesn't fit standard frames. |
|
| Rating: |
|
|
|
|
|
|
|
|
Period of
Product Use: |
Only tested |
|
Paintball
Experience: |
4 years |
|
Similar
Products Used: |
WGP stock 2k1 plate
Extreme Rage Roller Plate
Shocktech Trigger Plate |
|
| Marker Setup: |
'03 Shocktech SFL Minicocker
Shocktech In-line Reg
Dye Ultralite
Crossfire 68/4500 HPA |
|
|
|
|
| Strengths: |
Lighter than most plates |
|
| Weaknesses: |
Bad polish and chrome job
Not smooth |
|
| Review: |
Picked it up for $2 just to see how it might compare to the plate in my SFL (Shocktech), it weighs micro-ounces lighter but has no real benefit. My Shocktech one kicked this "Kick Ass" Paintball Product into the gutter where it belongs! Not near as smooth or slick as it's ST and WGP counterparts! Would NOT reccommend. |
|
| Conclusion: |
Don't bother with this, you are far better of with the Shocktech or WGP equivalent! I give it 2, it would work, but this is a piece I find it could be hard to mess up but hey... thats KAPP! |
|
| Rating: |
|
|
|
|
|
|
| Places to Buy | |
|
|
|
|
|
