The Shocktech Supa Fly Bolts combine our 3 hole design with a cupped tip to cradle the ball. Our bolts have an aluminum shaft for strength and Delrin any where the bolt might contact the inside of the gun for reduced friction.
The Shocktech Super Fly Bolt is newer, so it should be commonly available, both new and used.
02 WGP Vert Feed Autococker
FBM factory anodizing
WGP hinge frame
Low friction, light, durable
Delrin slightly out of round. Pull pin design needs revision
Fair bolt, as bolts go. Lightweight aluminum back, Delrin for the actual bolt. very low friction through the body of my cocker. Only issue...
Loctite the set screw on the back of the bolt. IT WILL back out if you rip paint through your marker, you WILL lose the set screw, ball bearing, and spring, and you WILL kick yourself when your bolt pops out of your marker mid-game because you didn't notice the pull pin came out.
Iffy. Shocktech doesn't have a good name with me. This bolt didn't exactly improve my opinion. Some people will swear by it, I'll continue to swear at it.
Like all things, the bolt you put in your marker is a matter of personal taste. The things it does well, it does really well, but spending 50 bucks on an 'almost good' bolt isn't a good investment in my book.
wgp 04 and 03
shocktech supa-fly bolt
mako 14" 2 piece al.
Extremely good looking
No lubrication needed!
When i first used my wgp 04 cocker, all the balls i fired were going downwards. so i decided i needed a new bolt and a new barrel; so i order the shocktech supa-fly bolt on xpaintball and my order comes. I shot it and all the balls went straight and fired more quicker.
If you are finding a new bolt, get the affordable, good-qualitied supa fly bolt.. I guarentee you'll love it.
9 out of 10
Last edited on Sunday, October 24th, 2004 at 10:33 am PST
Stock WGP bolt is the only one that compairs to this.
2K2 Vert Autococker
ANS Gen-X3 Front Block/Kit
ANS Gen-X2 Inline Reg
CP Flame Drop
Shocktech Ball detent
New Internals (sear, RAT 3:16 valve,ect)
STOCK BARREL <---- awesome barrel
12V hopper w/ X-board
68 4500 Crossfire nitro
Well lets see never have to oil this beast. You can get this in different colors. I can't oil a stock bolt to slide as good as this one does if i do break a ball i don't jam. Helps lower pressure but not enough to matter if you don't have other things to lower your pressure.
To much for a bolt, and you really don't need a new bolt unless you break your old bolt or your trying to make your marker custom. People says it swells if you oil it but im not to sure that happens.
Good bolt if your going to buy one, but you really don't need a bolt unless your old one is broke or its scratched to death. This bolt has not external o-rings so no changing o-rings, just one less thing to do. DELRIN no more oiling for this bolt. IF you need a bolt get one, buy this one.
WGPchris kole bolt-alright, but it was not polished so it didnt slide very well=higher cocking pressure needed
ANS phase II venturi bolt-better than either supafly or ^bolt^
Shocktech tremor series...eblade grip
directs the air on the ball softly
Heavy (NOT for e cockers) ill explain further in the review body
alright, well this thing came stock on my gun.
It is to thin for my guns body, and to thin for all other cocker bodies ive tried it in...that means alot of blow back and loss in efficiancy.
its very heavy, and gives ur gun alot of kick. if u have a e cocker and have ur basic sto style ram do not get this...its will feel like shooting a cannon from the kick.
also, when i got the bolt, the spring for the bearing for the bolt pin was in backwards...no big deal right? NO! the spring would bind on the bearing and make it damn near impossible to take the bolt out...i had to use a mallat to get it out, after some messing with it i truned the spring around and all was good...but its still heavy and give blow back...
DONT GET IT! its heavy, its to thin and causes blow back...id say get a evolution delrin bolt, or a wgp delrin bolt with orings...one of those two will be my next bolt.
2001 vert. feed, WGP hinge frame, Shocktech front block ,Bob long venturi bolt,Shocktech rat valve, ANS Gen-x reg., J&J two piece barrel12"
No O-rings, no need for oil.
Ok lets see, first off this bolt costs to much, breaks paint,and does not seal.
I used this bolt for about six months and nothing but problems. every time i would time my gun i could not get rid of the blow back. put in a stock bolt and took care of the problem. it also didn't matter what brand of paint I would use, still broke paint.
I would use a stock bolt over this total piece of crap!
Don"t even waste your money on this bolt. If you want a good bolt,try the Bob Long venturi bolt, its alot better.