This solid railmount air source adapter comes standard with an on/off valve and will fit on your crossfire cradle or other railmount cradle system like the CP, Shocktech, Centerflag, and select Benchmark cradles.
The Custom Products ASA Rail On/Off Adapter is newer, so it should be commonly available, both new and used.
CP Shorty Reg
CP On/Off ASA
CP Micro Drop
Freak Jr Barrel
Smart Parts Rake Trigger
Halo B Rip
68/4500 Crossfire HPA
Easy to install
On/Off Explained below
Ok its a great ASA - buy it. Does what its supposed to do. (air on / air off duh) Now here's the bad part I found the hard way. The center screw which controls the pin that releases the air from your tank is connected to the knob with loctite. Yes...cheap factory crap loctite. So the very first time I aired up my ion it didn't release pressure when I tried taking it off. So...after I got the tank off I had to take the asa apart and clean it off and reapply better loctite. Now it works great
Buy it and hope you don't have the same issue I did. But it was easy fix so I can't complain too much. 8 of 10 - nothing's perfect
Prostock Cocker - Slik Bolt, Block, Rod and pin
HPA Tank 68ci/3000
Freak Barrel System
Easy to use
Its great, just get it!
None that I've encountered, or heard of.
I use this on/off with the CP rail drop forward on both my markers, and I have never been disappointed.
Turns easily, engages fully, and releases pressure as you degas your marker.
I have the black and pewter ASAs with corresponding drops, they are secured easily on the cradle with only two screws to secure. Slides onto and off of the rail easily.
There are hose holes on both sides of the marker and you get a screw to block of the other. You will need to purchase Teflon tape to stop gas from escaping, get it at your local hardware store in the plumbing section, less that a dollar usually.
This product is great when your looking to get an on/off. it may be a little more expensive than the others. But you wont get half the quality you get from this on/off. the knob twists so easily and it works amazingly on my gun. I highly recommend this on/off.
My friend got a shocktech one for $43 from our local proshop and it isnt even as near as nice as this one. Highly recommended.
Buy it, you wont be as delighted with any other on/off.
10 out of 10
Last edited on Friday, February 15th, 2008 at 4:50 am PST
2007 Dynasty Shocker, blue Hybrid grips, black cp on/off, blue halo b with rip drive, Pure energy 72ci 4500psi tank.
Less orings to buy.
Degasses with tank still on.
Can't think of any.
I bought this a few months ago and when my Shocker came in I put it on it. It is just so easy to use PERIOD! It looks awesome and you can have the gas line going out which ever side you want. You don't have to turn the knob like a million degrees, it just like a 1/4 turn.
Special Edition PMR-Black, silver
Black CP on/off
crossfire LP 68/ 4500
Blue Dye Rhino cover
Halo B with rip and speedfeed
Tippmann 98 custom
14" pathfinder barrel
Tippmann double trigger
20 oz Co2
Easy to turn
Includes plug for port you dont use
This ASA is one of the best if not the best ASA's on the market. It is so easy to turn and bleeds the air pressure if you have the 05 version or later. It is so easy to turn even when you have greasy hands and it's pressurized. It also incledes a plug for the other side of the port you dont use. I will never use a different on/off and will probaly never need a new one.
I reccomend this on/off to any body who is looking for a great on/off
Dye Boomstick barrel
NDZ clamp feedneck-red
CP ASA rail ON/OFF
DXS high 68 45
NXe tank cover
Very easy to set up, and great price.
Not a single one
I bought this today, only the newer one, and the first thing i said was "thats cheap". This thing has a guage port, many colors, and is cheap. it took me about 5 minutes to put it on with hose and all, then i grabed my tank and tried it out. First off, there were no leaks, and it is very stylin!!! it works great compared to that peice of junk stock PMR ASA which stripped on me the first week i had it. It works very well.
You are insane if you dont buy it because it rules, and if you have a cruddy stock one I strictly recomend this.
SP Red bodykit
SP Black low rise q-lock clamping neck feed
ND Red roller blade trigger
CP Red ASA rail on/off adapter
CP Black micro razor drop forward
DXS 68/4500 nitro tank
Dye Red Rhino cover
Empire Invert Blue Jersey #37
Empire Invert Blue Pants
V-Force Blue Pro-Vantage Goggles
Exact same shade as trigger
Got this on/off yesterday and played with it today. It was very easy to mount onto my drop forward, just slide it on and put the screws in and tighten them. Looks very good, and works perfect. Does what its meant to, nice color (matches trigger perfectly) and it is fairly light even. The perfect on/off for an ion.
Get this if youre looking for a somewhat cheap, good quality on/off.
-WGP Autococker OutKast
-Evil Pipe Kit
-ShockTech Bolt and Drop Forward
I got this ASA on my new gun and I love it. Works great. Easy to turn on and off. It comes in many different colors and looks really good. Also it was made by Custom Products so that should tell you something. Compred to some other On/Off ASA's it may look a little pricey, but it's money well spent.
RPG Mini-Tac Pro (clamping feedneck, custom mill, custom ano, light frame, dual detents, viperblade pro)
CP on/off w/ CP rail
SS hose from ASA to grip, to valve
J&J Edge kit (8",10",12" & 14")
Bleed your gun the easy way
Not much to say other than it works perfectly. It's easy to turn on/off and bleed the air from your marker. The color finish is nice and looks like it would survive abuse (haven't beat it up yet.) It also gives you the ability to mount your hose on the left or right side. It comes with a plug for the unused side, or you could install a gauge if you like. The dovetail mount allows for mounting to most drops.
cp flame drop forward
cp asa on/off
q lock feed neck
12" two piece all american barrel
cp roller trigger
kila magnetic detents
smart parts firebolt
new designz qev
DXS pulse loader
68 cu pure energy tank with cp nipple and dye cover
Need to have cp drop forward or rail for it to fit on your gun
This asa is another great product from cp. It allows you to easily depressurize you're gun before unscrewing it. The threads on the asa are very nice and its smooth when screwing in your tank and unscrewing it. So there will be no more blowing o-rings. I now have multiple products from cp because this worked well. I have had no problems at all with this product.
You will feel better once you have bought this. It's not too expensive. You wont regret buying it.