lets say, any other high end gun out there. nothin can compare to this.
spyder tl with dragun kit
taso eliminator barrel
3000 psi tank
and other stuff but who cares
very fast ROF
much much more
No intructions, but no problem
Cant think of any
this thing amazed me! i got the kit and had it installed in about an hour(does not take rocket science to put it on).
after i had it installed and all, i went to the local field to mess around, and its soooo awesome. I first tried with a co2 tank, and could shoot off about 10 balls a second, no problem, which is really amazing.
then i stuck on my nitro and my evo ll hopper and could get off about 17 balls a second!!! there are so many guns out there that are 5 times as expensive as this, and dont preform anywhere near this. It goes on any spyder, and will make anyone crap their pants when they use it. My friend brought his autococker to the local field with me. And ya know which gun all the referees wanted to shoot? Gee, was it my friends 800 dollar gun? NOPE it was mine! all the refs couldnt take their hands off it. they wasted about 3 tanks worth of air just by dry firing it, and playin around with it.
it has like 4 diff firing modes, and you can set on each one, how many balls you want to shoot, it will blow your mind.
DONT THINK FOR ANOTHER SECOND ABOUT BUYING THIS
GET IT NOW!!!!!! YOUR GUN CAN BE GODLY TOO
i got mine brand new off ebay for about 170.
good luck and kick sum spoiled rich kid with an angels arse!!!!!
NEED I SAY MORE???
GO NOW BUY IT!!!!!!!!!!
RATING = 999999 no lie
I bought this kit after using my Spyder TL-X once. I went out with my friend to paintball and I really looked bad next to his modifyed T.E.S
Being the kinda guy I am, I wanted to get a fast gun, but not break the bank or try to make some fashion statement.
The one kit can kinda be confusing to install, weak instructions are the cause of this, but once you get it....its really simple.
Once installed, the gun had turned into a monster! My crappy little spyder was now shooting as fast and as accurate as ANYONE on the fields! It really is fast as hell, and is pretty darn consistant
the T1 kit is realitivly cheap for what performance you get out of it.
If you buy this kit, you will be most likly be picked on by people who have Timmy's or Angels. Why?! because they see how well your ugly spyder performs and they have to make fun of you so they can forget they spent $800 more dollars for basically the same thing.
Dont get me wrong, it doesn't have the best feel out of any gun, but it performs most likly better than you will expect.
I am giving this kit a 10 out of 10, because its the first product that I have used that really improves the performance of your gun greatly, and doesn't break the bank.
Dragun T.E.S. (with The One Kit)
Bob Long Torpedo regulator
Shocktech Intimidator Delrin Bolt
50g Trigger Upgrade
Smart Parts Progresive Barrel
Kapp Drop Forward
Mighty Duck 68ci/3000
Halo B Z code w/ Rip drive
ROF (Rate of fire)
Eyes (Anti Chop)
No memory (will erase info and settings when turned off)
This is a great kit, will make any gun tournament ready. The rate of fire is awesome especially after changing the microswitch to 50g one. I first bought the T.E.S. and had some minor problems with it and since I also had a Spyder Imagine I decided for The One Kit for my T.E.S and then I put the T.E.S. regulator, grip and valve on the Spyder.
The results were awsome a T.E.S. that now is an intimidator dishing out 20-30 ball per second witout any problems at 275 psi, I did put a Torpedo regulator so that it was more consistent when I walk it, and a Shocktech bolt for the obvious reasons, and of course a Halo to keep up with it. I have put more then 2 boxes of paint through it and only 1 chop (avoid dark paint)
The spyder became a T.E.S dishing out 20 ball per second and now operates at 400psi instead of 800psi. I would also recomend using a Halo because even though it has no anti chopping eye the Halo always has a ball in the chamber ready to fire.
The guys at the field I play are going nuts with the way this gun rips they all ask to shoot it, and by the way the use Intimidators and Shocktech Bushmasters etc. As you can see I have not touch the looks of the gun wich are pretty hot by the way. If you want a gun that can keep up with the top of the line guns out there without spending more than $350 this is it...
Nasty impulse with vision, 3a compressed air tank, Halo B, freak barrel kit, 32 degrees harness, spyder amg lcd classic with upgrades.
It allows you to shoot quickly and smoothly without any interjections of your shooting.
It leaks in the gauge and hoses connecting to the chamber.
The trigger frame kit comes with an frontblock anodizer gauge tigger frame bottom line dropforward etc. This trigger frame is a very good trigger frame the only problem is that it leaks alot of air. The thing is its harder to fix not that its a bad kit it's just that's it kind of hard to cover all the leaks when there are so many of them. I like the trigger frame because it is fast, smooth, sufficient, consistant, and controlable.
Well in overall conclusion of "Dragun The One Kit" is that its an all around good trigger frame but it leaks alot.It's also pretty good for the price.
High rate of fire
not to hard to put together
bad instructions but once u figure them out u can do it quite easily
It works good. Shoots great. a electronic hopper is a must with this kit.
And try not to use CO2 it can mess it up bad if u get liquid inside of it.
Overall it is a great kit and reccomend it for anyone that doesn't mind spending a fair amount of money for it.
I recommend it for anyone that wants to make their slim stacked blow back better
The One Kit
Timmy ASA w/ Timmy LPR
Tubo Relief Valve for the ram
JJ Ceramic 14in.
Hacked Board (turbo mode)
Check It Sweet Spot Trigger
WGP Ergo Reg.
Evil Timmy Bolt w/ modded pull pin
2002 Ironman Matrix stock
It works just like a Timmy...and an Impulse.
The High Pressure Reg. that comes with the kit sucks get a new one.
When I heard about this marker from a friend of mine who had a 2k4 Cocker I knew I had to have it. He had been looking at the new PGI Osiris when he found out that the Osiris technology was in THE ONE. I told the guys on my team about it and they suggested I get the kit for a broken down Mongoose that on of their brothers didn't use. I got the kit and installed it in less than 2 min. After 1 fill of my 144/3000 tank I noticed some immediate upgrades that could make this gun a true "timmy killer".
1) New Reg.
2) Timmy ASA and LPR
3) Eyes (hurry up and get here T-Board)
4) Turbo Relief Valve ( QEV / TRV)
If you aren't into tourny play DO NOT BUY THIS KIT!!!
Why? Because no recballin noob should be allowed to have this amount of power . I don't mean to bash anyone, but this kit is too awesome to be used once a month.
Some upgrades I have heard rumors about are...
1) Classic Intimidator grip frame with SOB board
2) Timmy Noid
I might try these if I can find the parts but they aren't neccesary to make this gun rip.
THE ONE Marker (not Kit)
Halo B Hopper
68/4500 Centerflag Bottle
Fairly fast ROF
Anti-Chop Eye is usless
I picked up THE ONE from Kohn Sports in Brandon FL For about $250. Out of the box this is a very nicely machined gun. Barrel is smooth, decent bolt, comfy grip.
This gun has quite a few problems with it, and I will elaborate.
Drop Forward Problem-
The drop forward hose isnt long enough to allow the ASA to slide back enough to fit a standard nitrogen bottle. You have to literally pull extremely hard to get the ASA back enough to clear the bottom of the grip. If you dont do this, the guage or the nipple will hit the grip, not allowing your bottle to screw in.
Hose Fitting Problem-
This absolutely BLEW the review of this gun. The threads to the Inline reg and the threads to the drop forward are a special thread. The fitting is a special thread with a ORING on it. You CANNOT, under any circustamces, change the hose kit on THE ONE. You are stuck. If you pull off the fittings, you will see that it's not the standard fittings or threads used for paintball. Any normal hose, macro/micro line fitting WILL NOT screw into either the LPR or the drop forward hole that comes with the gun. This gun uses SPECIAL fittings, you cant find them at paintball stores.
Ball Chop Problem-
The eye of this gun is worthless. When I thought "anto chop eye", I figured it would do just that. You WILL chop paint with this gun. Period. The Anti- Chop eye does not do it's job. If you're ROF is higher than that of your hopper's feed rate, you will chop. I have used other guns with good antichop eyes, such as the Angel, Karnivore, etc, a good anti chop eye will not let you chop paint, period.
This gun is a gas hog to a nightmare you cant even imagine. Most guns can get over 1000 shots with a standard 68/3000 fill. This gun will NOT make it to 500 shots on a 3000psi fill. I was able to fill my halo 3 times before I was completely out of air. That is about 500 shots. The last 30 were dropping off horribly.
This gun has a terrific amount of blowback, it can pop the balls about 4 inches out of the feed tube when you fire. You must use a force feed hopper like a Halo or an Eggy minimum, or you will chop paint. A 12V revy will not cut it. Everytime you shoot with a 12V, the balls will blow back into the hopper.
Garbage, wait till they improve the kit, then spend the money