98 custom,CMI 16" QB Tru-Flite,Maddman springs,Ben Tippmann Sealed Bolt System
Cheap,light weight,easy to install,easier to grab
Fiber glass type composite,hex bolts aren't the same size as the stock bolts,
This isnt brain surgery to install the directions are pretty straight forwar(no diagrams).all you have to do is tear down your marker (like you would if you were to clean it)then slide out your old cocking knob and slid the one that it came with into the hammer,put your marker back together and THEN place the the cocking ring over the bolt opening and then use the longer bolt(yes it comes with with them) and VOILA your done.its easier to grab on to .
Overall a good product it has its pluses and miuses but definatly recomend to keep dirt paint and other gunk out of your marker i'll give it a 7.7 but since i cant i'll give it an 8 besides this is paintball nothing is perfect.
'95 Automag, bone stock, '03 Autococker, bone stock
Keeps internals clean, quiets marker sound
Have to take the whole gun apart to put it on
This product does what it says it will do, keep your internals clean by covering up the hammer opening.
On a side note, it does make your gun a bit quieter when firing, but not by much.
I did not like having to take the whole gun apart to put this product on, but that was the only way to switch the bolt handle to the included one with the kit. However, now that it's on, disassembly of the gun is normal, take off the 6 screws.
I would have liked to have seen an allen wrench included for the included bolts, but I have many wrenches so no biggy. I'm just thinking of the kid who gets his first gun and gets this product, then doesn't have an allen wrench.
(The Tippmann wrenches don't fit it)
I would purchase this product for the protection it offers against stuff getting into your guns internals.
Tippmann 98 Custom
J&J Ceramic 14 Inch Barrel
BT Sealed Bolt System
Covers the opening of the cocking mechanism.
Seemed to quiet the gun.
Made out of fiberglass-like composite, so it might chip or crack during winter play.
I used this for the first time yesterday. It worked beautifully. It made the gun's noise not as loud.
In my first game yesterday, we we're playing in the woods. I tried to get my enemie's flank and shoot them, but they were trying to do the same to us. This was a 2v2 game, just a basic practice. So I see my enemies in the distance and I get behind a tree. When they're about 30 feet away I shot a few rounds, just to shake them up. I yelled for my friend, and I got up to move back to the next tree, but I slipped and dropped my gun in weird concauction of pine needles, water and decayed wood. I dropped it right on the sealed bolt system, and right then and there I was happy I got this product. If i hadn't I probably would be cleaning out my gun right now.
Get this product if you get on the ground a lot and you do a lot of sliding.
I've had this for a few months now, and I've even pitted it against the Rocket Cock 2 from whoever makes that. There is NO comparison. BT's Sealed bolt system is without a doubt one of the best 'mods' available for the 98c.
The Sealed Cocking System does in fact quiet down the operation of the marker, as well as prevents dirt, grime, and other debris from getting into the inner workings of the 98c.
Installation is also a breeze. It's as easy as replacing the cocking rod and bolting the Composite pieces on using the supplied hardware.
I love this thing. It's made my 98c quieter and it just looks really cool!
98 Custom Pro
No cleaning bolt
No paint or muck in the bolt
No moving parts
None, WIN WIN SITUATION
I bought this for Christmas and went paintballin New Year's Day. I bought it because I hate taking my gun apart. It was magic, my first hit of the day way a gun hit right nest to my trigger. No paint got in the bolt, but it got all over the seal bolt. It was awesome. It is super cheap on Rap4 also. For $12.95, it is a vital upgrade to any 98.
The easiest, cheapest upgrade that makes your 98's internals protected.
bt sealed bolt system
alright so i wanted this because im a klutz and keep on dropping my 98 custom during woodsball play. when i got it (ebay, it was like $10) i immediately put it on to test it out. installation was very simple, just one problem. when i put it on, i found that if i tightened the screws a lot, the bolt wouldnt move, cocking or otherwise. so i loosened it and now the screws are just a little loose, no biggy, as long as the screws dont fall off. anyways, i tested it out with my whisper barrel, and wow, what a difference! the whisper has so much porting, so it can handle more air, and the gun was really quiet. it did raise the velocity ever so slightly, because the CO2 that would otherwise pop out of the open bolt had to go through the barrel. again, no biggy, just lowering the velocity takes care of it (actually, its a good thing, now that i think of it. now i use less CO2 to shoot the same velocity). there is also no cock ring blowback, meaning that once you cock the ring and put it back, it wont move even though the bolt is. it also is very durable.
i've heard some statements regarding that this will increase the accuracy. i dont know how it would, it didnt for me, but im not taking off for it because thats not what i got it for. i also heard from a couple reviews that the ring is blocked by some buttstocks. i dont have a buttstock and i probably wont get one, so i wont take off for that, either.
i recommend this product because it
a. quiets the gun
b. keeps the gun clean
c. you use less CO2
d. cheap and durable
e. no cock ring blowback
i strongly suggest anyone who is even thinking about getting one, get it.
10 out of 10
Last edited on Saturday, September 9th, 2006 at 11:28 am PST
This product is simply amazing. It took me about 5 minutes to install.
It eliminates that moving bolt on the side of the gun, which while it looks really cool, hurts like hell if you get your thumb caught. It also eliminates snagging on the bolt.
It protects the markers internals from paint and dirt getting in, so thats an obvious plus.
Because it costs so little and does so much, I'll give it a 10. I can't think of anything that would make it better.
Tippmann 98 Custom
Tapco T6 6 Position Stock
Daisy Electronic Point Sight
Tippmann Pro Drop
Ben Tippmann Rocket Cock
Stainless Steel Screws
Tasco 30mm 1x Red Dot Scope
OPSGEAR Raider M4 Weaver Hand Guard - 9 Inch
OPSGEAR 18" Interceptor Sniper Barrel
OPSGEAR Integrated Weaver Tactical Retracting Bipod
OPSGEAR A3 Flat Top Carry Handle
OPSGEAR Single Side Weaver Carry Handle Scope Mount
Maddman Spring Kit
Tapco T6 6 Position Stock
JCS 98C to A-5 Barrel Adapter
05 Proto Matrix
12" 1 Piece Proto Barrel
Pure Energy 3000 PSI Tank
Keeps dirt out of gun
Tapco 6 position stock wont fold all the way
flatline shroud wont fit
I got this because a big problem with my 98 was dirt would get in the gun and jam up the spring resulting in the gun uncocking. So one day after I played at the local fied, I went to the fields shop and bought it. After I got it I went home and Installed it. It was easy but for a noob who has never taking apart his gun before, it will be a challenge. You have to open up the gun, take out the old cocking handle, put the new one in, close up the gun, and screw in the plastic cover (using the two screws over and under the space where the cocking handle went). I dont care that the thing is plastic. As long as it dont break easy and it does its job, its fine with me. I found that it doesnt really quiet the gun at all. It just changes the sound of the gun when you fire, a little bit. The only real weaknesses I found was that if you have a flatline, the shroud might not fit right and you might have to cut it and if you have a adjustable stock, the rocket cock pervents it from folding all the way. Just the first position will be blocked.
I built a "rocket cock" based on this design but it was not nearly as durable and broke
I use a Custom 98 with a Flatline barrel system
I use Diablo 13 paint, it seems to work better with the Flatline (i think b/c of the thicker than normal shell)
Quiets the gun
No more moving parts
Had to cut Flatline shroud to install
Looks kinda strange
I recieved my bolt system and immediately realized my mistake. It wouldnt fit on the gun b/c of my flatline shroud. The top screw was slightly covered. I had to use a wood file to cut away some of the shroud. My initial reason for making a rocket cock was to cover the cock slot. I slide often and my gear gets pretty dirty. I always got paint and dirt inside my Tippmann and had to clean it.(If you have a 98 you know wat a chores this is.) Also, one of the things I really disliked about the Tippmann was the moving bolt. It got on my nerves mostly b/c I kept hitting my thumb on the bolt and jamming the gun,not to mention my poor thumb. The rocket cock covers the bolt and completely eliminates this problem. It also quiets the gun which is good in woodsball when you want to keep a low profile. This is definitely an upgrade worth getting (especially for the price). Plus its alot less work than making ur own.(Which would probably break the second time you used it, like mine.)
Buy it its worth the money plus its an easy install. Unless you have the flatline then its a little bit of work, but still worth it.