A drop in assembly for the Smart Parts Ion Paintball Gun. Allows air venting at the QEV instead of routing it back through the solenoid. This allows quicker cycles while being able to lower your dwell.
Increases cycle rates
Allows user to decrease either dwell or input pressure or in most cases both
This QEV does not require any body mods, simply install it
Includes quick disconnect fitting and hose
The New Designz Ion QEV Kit is newer, so it should be commonly available, both new and used.
2005 Smart Parts Ion Pro - Red
CP Sling Blade Trigger
TechT L7 Bolt
Worr Gas 50/3000
Grease Trap for Selonoid! No more tearin apart your selonoid for cleaning!
Threads can be stripped, but only if you can't read!
Ok som installation was super easy! I gased up and went outside to tune. I got my dwell down to 5!(I have an upgrade bolt) And, my input pressure was 140ish! It gave me about 2 hoppers more paint per tank! It's GREAT!!! And, yeah, you can strip the threads, but it says right on the box do not overtighten or threads may strip!
Smart Parts Ion
68ci 3000 Crossfire tank
TechT L7 bolt
Paintballgear.com "Skull and crossbones" drop forward
Smart parts Freak Jr Barrel
New designz QEV
clamping feed neck
Egg II loader
The install is extremely easy. Break down the marker like you would normally for cleaning or other maintenance. Remove the old banjo fitting and replace with the QEV. line up the hose with the QEV and cut it with a Razor be sure to cut it a little long so that you don't have to replace the stock one with the one provided. Keep the one provided as a spare. hook up your air source and check for leaks before reassembly.
I get 1 to 1.5 more pods out of a tank. My dwell is set at 5 and my input pressure is around 120.
Easy and inexpensive upgrade to the Ion.
Hand tighten only no tools are needed to install the QEV.
Great upgrade in efficiency definitely worth the money.
10 out of 10
Last edited on Monday, March 5th, 2007 at 10:46 am PST
Smart Parts Ion
Razor Blue Body Kit
Ion Virtue Board
New Designz QEV
Max-Flo Micro Air System 68/45 Tank
Faster cycle rates, air effecient, faster bps
Heavier than original valve, first shot drop off
I have used 2 other qev's before this one and both weren't to hott, this one was by far the best one i have used, increasing my rate of fire and air effeciency. The qev is a good alternative for better air effiecency and faster cycle rates rather than buying a new bolt for $40. The qev only costs $20 giving you a huge advantage with rates of fire and air effeciency over your opponents. A must have for the serious baller with an ion.
I would recommend this product for ballers that want faster rates of fire and better air effeciency. and also for those tournament ballers with ion that want to prove a $300 marker can shoot just as good as a $1000 marker
Virtue ez on
New designz trigger
New designz qev
Q-lock feed neck
Freak jr barrel
Cp on off
More shots per air fill
Dwell can be set way lower
The qev by new designz really deos the job when your looking for something that gives you more shots to the air fill and gives you more of a consistent shot it truly is what you should by if your looking for something that is low priced and does allot for your gun then this is what you want trust me.....
cp flame drop forward
cp asa on/off
q lock feed neck
12" two piece all american barrel
cp roller trigger
kila magnetic detents
smart parts firebolt
new designz qev
DXS pulse loader
68 cu pure energy tank with cp nipple and dye cover
Can lower dwell
Don't have to shave body to fit
I got this qev with my virtue board. It's not very hard to install. I got amazing improvement when This was installed with my virtue board. Not only does it create better air efficiency, it's a grease trap for your solenoid. No more cleaning that out. You can also lower your dwell settings which allows your rof to raise greatly. You can add another 1-2 bps with just the qev and no virtue. The qev also allows you to have more shots per tank fill. DO NOT OVER-TIGHTEN the qev because it will leak. It's only $20 for this great upgrade.
This is probably the best if not one of the best upgrades you can have for your ion. There are tons of different good things this qev does for it.
Smart Parts Ion
Viewloader Evolution 2 w/Y-Board
47ci 3000psi Pure Energy Tank
Increased Air Effciency
Allows faster firing
Takes a minute to install
I got the ion QEV because i was sick of filling up every game and taking time out of my four hour session. When i got the QEV it was a little erritating to install but when i did i could clearly notice the increased air effeciency and cycle rates.
none except the stock banjo fitting which the QEV replaces
most QEV's are basically the same
It vents out grease and dirt.
I was able to lower dwell greatly.
Threads may break if not careful during first installation.
I went to my local paintball shop and picked up one of these for $20. It is a simple but in my opinion an effective upgrade for the Ion paintball marker. I installed it an was a bit uneasy at first. I was told by the guy at the counter that at first resistance when screwing on the QEV, to stop. There were no instructions with the QEV but I found some online. When installing the QEV it started to get hard to twist but the port for the hose was at a ninety degree angle from the hose. But being me I continued and it ended up being okay. Now every time I put it in it will easily screw in all the way.
The next day I did some playing around with my gun and I was able to lower my gun to a dwell setting of ten. I don;t know if thats safe for the gun with the upgrades I have but the gun would fire.
A couple days later I went and played at my local field. Everything worked perfectly. When I got home and took off the frame to clean the internals and bolt, I notice a small amount of dirty SP Sleek lubricant squirted around the long hose and the inside of the frame. For a minute I was confused but I realized the stuff had most probably been vented out of the QEV. I was glad because it was a lot better than getting in the solenoid which can be a pain to clean. I was happy with my new purchase.
This is the first or at least one of the first upgrades an Ion owner should purchase. It is so effective and yet cheap... I think Smart Parts should just add twenty or so bucks to the Ions cost and incorporate it into the gun.
Smart Parts Ion Pro
SP low pro feed
Virtue eyes (green)
Virtue on/off replacement
works just as well as any other QEV, I've shot other IONs
You can strip the threads but only idiot will do this.
I'm not sure what to put here, I added the QEV when i first bought my ION, and i have never played a game with a stock ION so as far as air conservation goes I am unsure but a tank will last me for several games so I assume its work as it should. I've also played with my buddies ION he has the 360 QEV and similiar upgrades I have and his air last just as long as mine does.
Smart Parts Ion
Evil detenator reg
Warped sportz snatch grip
06 hybrid grips
SP mini drop/ S rail
CP on/off with bleed
Fdjzm bolt mod
Hand polished frame
Cut trigger guard (a lot easier to take the frame screw out)
Red body kit
Iexpensive, goes right in
Well, it does its job. i had some issues putting it in the first time, because I am new to paintball and was still learning the anatomy of the gun, but now that its in, it works great. I get roughly an extra 3-4 pods with this, so, i notice the difference with a 48/3000.
I dont know what else to say, it works, easy to put in, just be careful, dont overtigheten it!
Buy it, just because you dont have to mod the body!
black ion with new designs on off with degass (duckbill=fugly!), halo b, air america 45ci 4500 high pressure
Price, does its job.
Make sure its screwed in all the way
If you have an ion, buy this, because ions are gas hogs! This is a cheap thing that can boost your efficiency, and lower your kick. I have my dwell at 7, and there is no kick, but its not very efficient. Higher dwell is more efficient, but more kick, so just play around with it and decide what you like.