The ProMark BSI Two-Finger Stick Trigger and Guard for the Tippman 98 Custom is a direct two-finger replacement for the plastic original equipment. The high-end look and feel of this black-anodized aluminum upgrade will have you looking sharp as you eliminate your competitors in style.
The ProMark Products BSI Stick Trigger and Guard is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Tippmann 98 Custom
Cyclone Feed Hopper
ProMark Stick Double Trigger
Pure Energy Flame Drop Forward
Made of aluminium, very durable. Stick is angled down, so its easier to use.
Difficult to install, must take out old pins/springs to install on trigger.
Lighter trigger pull than the stock, but would be better if you used a pen spring mod.
Feels better than the stock, or any curved double trigger.
Looks so much better than the stock trigger.
The trigger guard hole is SLIGHTLY smaller than the screw, so it can be hard to screw your gun back together.
Unlike many 98Custom double triggers, the grips do not need to be cut, the trigger guard lays flush with the grips!
Good product, can be difficult to install if this is your first trigger, but can be easily fixed.
This is a great trigger. It is very easy to install, all you need to do is change over the spring and such from the stock trigger over to the Promark. The trigger is not made of cheap, flimsy plastic, and the guard isn't either. Also, theres no need to cut your grips to get the guard to fit like some other trigger kits. It immediately makes the pull lighter, right out of the package. If you are looking for a new trigger, or even a different double/blade trigger, spend a few extra $ and buy this. Its well worth it.
Buy it. It preforms as well as it looks, and its steps ahead of other trigger setups.
tippmann 98 custom with:
BSI stick trigger
jj ceramic 14"
psycho ballistics drop
double ball latch
modified trigger for short pull
68/45 crossfire hp tank
palmers stabalizer regulator(soon)
Vlocity hopper (soon)
The trigger guard shakes around a little bit which seems kind of annoying
made of aluminum
you dont have to cut grips for guard
trigger is sort of angled down, which makes it easier to shoot faster like that
I have this on my 98c with ebolt, and i can consistently shoot around 14bps with it......it is really comfortable, and feels a lot better then the gta double trigger, since it is strait and smooth, also because it is angled down, rather then being completely strait down and vertical
Definitly get this for your 98c.....its is the best trigger out there for it
SUPER LIGHT TRIGGER PULL
Comes with nice trigger frame- See review
OK- This thing is the best! I have a Double trigger, and there is space between the tripping of the sear and the begining of the pull, BUT on the Promark all you have to do is put about .25 lb of pressure and Blam u triped the sear. Man O man this thing rocks i was able to shoot about 13 balls a second.
Second it comes with a nice trigger gard that letts you mover your fingers back and forth so you can walk it. Like i said before no more 1 lb trigger pull!
want to shoot fster without and R/t THEN GET THIS!!!
dye matrix , bushmaster w/ freak kit, 98 cuztom for the woods baby
Nice fire rate, feels awsome, gets the looks to your woods game.
Nothing, other than stick grips need little adjustment if you wanna have the trigger guard.
An amazin part one of the best for my 98. uhh nice rate of fire, i recomend upgrading the trigger spring, they are like 15 bux and help out allot when you look to make ur trigger lighter, but u still hafta break the sear so dont be expecting an electro feel pull cuz that ant happin. but i would recomend this over any other because its mettal durrable compaired 2 the other plastic ones
Ok so i got it and tried to install it but when i shot it it would fire the first time then when i would pull it, it wouldnt trips the sear. So i found out that when it fired once the thing that trips the sear would be pushed in and wouldnt come out so it didnt work. So what i did was stretch the spring out and then widen the thing that trips the sear i forget what its called.
98c, Lapco drop forward, cp 14" .689, GTA expansion chaimber
All metal, even the trigger guard, you do not have to cut your grips
Great trigger, you can pick them up for $30. The best quality trigger for a 98C out there. Does not work any better then any other after market trigger, it is just made better and is a blade trigger, which is what I like best. I really like that fact the guard is metal also.
The only problem is you have to transfer that metal thingy and the spring fromt he stock trigger to the new one. Other aftermarket triggers do not make you do this. Giving it a 9 because of this.
Get it if you really want all steel, a blade trigger, and it is worth the extra 10-15 $ over the other aftermarket triggers. I love mine.
98 Custom / 207ci 3000psi tank / Lapco Bigshot, etc.
-works great :)
At first, the trigger I recieved did not fit properly. I had to sand it down to get it to fit, and while it works, I'm skeptical as to how reliable it will be.
I contacted ProMark and they shipped me a new trigger immediately without a hassle!
Great customer service and an excellent product. The only modifications I've done to my gun thus far is the trigger and polished internals, and the pros at my local field remarked how fast I could fire with this trigger.
Definately a must-have upgrade. I prefer this triggers straight blade style as opposed to the moulded curved style of other double triggers
10 out of 10
Last edited on Wednesday, November 5th, 2003 at 10:08 am PST
Model 98 Custom
DYE Xcel Barrel
ADCO Sure Shot Red Dot SIght (doesnt do anything)
Promark Double Trigger
nice trigger pull (especially with pen spring mod)
for some strange reason my trigger guard wouldnt let me screw it in
well first off this is a really good trigger to buy. its light, durable, it looks really cool, and has a very nice pull. the only problem that i had was that for some reason my trigger guard doesnt line up right to be able to be screwed in all the way so now i have a screw stickin out the side of my gun like 1/4 of an inch
go buy this trigger! its really good. id give it a 10 if my trigger guard would just line up correctly