Will fit Standard (old style) and LCD boards
ACE support built in.
Trigger Programmable Firing Modes
NPPL Legal Semi Only Chips Available
ROF up to 20bps/Unlimited with AntiChop Eyes
Drop in installation
Adjustable Settings Include: ROF, Debounce, After Eye Delay, Dwell, Eye Interface
Allows for adjusting the following settings:
Trigger Programmable Firing Modes
ROF up to 20bps without PDS
Unlimited ROF with PDS
Adjustable After Eye Delay
*** Coming Soon***
Link your entropy board to your pc to adjust your settings with our interface cable!
This is for preorder. Boards are expected to ship by Friday 1-16-04.
The Vapor Works Entropy Board is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
I've used the Frenzy, SOB, SFB, WAS Equalizer, and Tadao boards all for the 2K2 Gripframes
I shoot a 2K5'd GZ, Excalibur, FL Viking, Texas Storm, Ripper, Ripper 2 and Ripper 3 Intimidators. I run a Halo or an Empire Reloader B (and now a Pulse) with a PMI Pure Energy or Crossfire Tank.
It's adjustable via their cable.
Too many weaknesses to really list.
I've used this product in several intimidators and was extremely disappointed. The board is relatively difficult to program in comparison to other boards on the market. The ability to adjust via anything but through the VLink cable is tedious and difficult. The programming isn't all that good and my marker seemed slower than with comparable boards. Overall the ease of use, installation and overall quality of the board leaves a lot to be desired. When I had an issue with this board and a Pandora the customer service from Vaporworks was sketchy at best.
The cost, at this point, is relatively low and that may be a factor in picking one up but frankly I'd much rather have a WAS Equalizer or Frenzy to utilize in an Intimidator.
species intimidator cp two piece cp rail cp on off soon cp trigger 68 45 halo b entropy ohh yeeahh
Speed great eye logic modes the tourny lock its not like the boblong ones
Not exactly userfriendly
Ive been lookin at this for a while now and it was either the entropy or the `127 i know alot of people that have problems with choppin and that kinda thing on the 127 so i whent with this
first got it i put it in and turned it ononly 12.1 wat the @#$$ later i thought about it because i couldnt change modes either so i took it back out and piulled thelittle chips of the spikey things with paint and air this thing will outrun everyone
full auto uncapped booya
Buy it look on ebay 70 bucks super cheap and get the vlink new modes
Classic Intimidator With a 2k4 clamshell
Single ASA LPR
CP Stick trigger
CP 2 Piece Barrel 12"
CP Unimount with on/off
Torpedo reg. with Twister bottom
Choke Chain Feed Neck
Adjustible Ram Cap
Halo B w/ Rip Drive
68/3000 Crossfire Fiber tank
It is amazingly fast. Has good eyes, and easy to set up.
Manual not included gun capped at 12 when balls not in place.
Good board, but defiantly needed to come with a manual, because i had to search online to get mine. ITs a great board otherwise, and in tourney lock it is fast as hell. I just really wish the bounce settings actually seemed to do something. Otherwise its a great board with just a few minor problems such as the ones i listed.
Classic timmy blue-blue fade, Ans reg, FBM trigger, Entropy board v2.2, FBM Thorn Drop, ANS vert reg, CP on-off
Speed, operation, Plug&Play, Upgradable
None that I can find...
Wow, what a deal of a board, i got mine directly from vaporworks website with the cable package for $100 plus 6 for shipping, Its really a deal. I installed the board, threw on a hopper of paint and was railing at 26bps. Its alot easier to use then ANY of the other stock boards, and you dont get thrown out of tourneys because of bouncing...the software is easy to use, the cable plugs into a printer port. Its got Semi, Turbo, Autoresponse, And Full-Auto. Ofcourse fullauto is only fun to use when I dont have paint in the gun, at 36bps. I mean I dont like cleaning my gun that often....The gun also works for those people without LCD displays, but I have one so I didn't try it.
Get it, any aftermarket board upgrade is worthwhile for the timmy, you can maximize your guns performance.
Classic timmy / entropy with bounce 1 / wicked switch / dual front (but soon to be single)
Dragon trigger / wgp shortie inline reg / w.a.s. eyes / ironman eye covers / Hydra delron bolt / 03 style longshot barrel / high flow barbs / lpr moded / STC techna trigger /
crossfire 77/45 low stubby / blue halo
board is nucking futs. absolutely insane. buy this board before you buy was.
not a single thing
this board is super easy to use. turn your gun on and the eyes are on and the gun will not fire without a ball in the breech but if your in a store and you want to show off like he said just hold the trigger down for 5 secs and release. This board is my favorite board yet and ive used W.a.s / Sob / frenzy / i just love this thing. nice job vapor works.
get this before was........i had some probs with my noid with THE WAS
Red to Black GZ, 16in UL, SnakeSkin Bolt, Clamp Feed, Dulies w/ volumizer, High flow barbs, 68ci 4500psi Dynaflow, Halo B
Ungodly Fast. For the noobs who like Full Auto, yes, it has it.
None So far. Really easy to use.
I was kind confused when I had gotten it because their was no Manuel, so I had to go online and learn how to use it. So once I learned how to get the tourny lock off, I could get the board to go past 12bps. I really like the unlimited ROF w/ eyes and 20bps w/ out eyes. You can also change from Bybass eye to activate eye by holding down the trigger for a few seconds. Im not sure this works w/ all modes for the eye, but I have my eye set to bybass and I just hold the trigger down for about 5 seconds and let go and the eye changes to activate. It had dwell adjustment and Debounce all in the LCD screen so its real easy to tell what your changing too. But im not too sure how the tourny lock works yet. Im thinking that once you put it back on that it will lock all your settings on how they are at that moment, but lets hope it doesnt put it back to 12bps max because that would def. be a flaw that would have to be worked out, but im pretty sure Vapor Works wouldnt do that. But this is an awesome board and I recommend it to anyone. I think its better than the WAS, imo, and is also only $75 so its a lot cheaper too.
This is an awesome board. Definently worth the money. At $75 this is like a steal compared to the WAS or Frenzy. If you looking to buy a board coming from a 1.4.3 then this would be the board to buy. But ive heard people asking if they should get one even though they already have the WAS. My answer would be no because the WAS is very fast also, but the only thing I like better about the Entropy is that its a lot cheaper.