ion, red dusted cp rake trigger,red dusted cp rail and on/off asa, dye ultralite-black dusted back and red dusted tip, redz cam lock, halo b with rip drive, and 5000psi evil tank
Strengths:
Lightweight, looks, drop size
Weaknesses:
None
Review:
I got this rail when i got the cp asa on/off. It is a great rail. The drop is perfect for airball play and it fits the asa perfectly. The color of the rail is cool and it is pretty easy to put on your gun. Nothing else to say, awesome rail.50 word minimum+ blah blah blah blah blah blah blah blah blah blah blah
Its a rail, its perfect, i like it. Not much to say. It looks good. It does the job, holds tight. Like mons onus. I dont have enough words so, bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla.
Conclusion:
Buy it if your looking to get a rail. I give a 10 because it does the job.
2002 vertical Autococker
All American Barrel 16"
32^ large drop w/ on-off
black magic reg, bolt, cocking rod, pull pin
Jackal 90^ Frame
3k HPA
Halo B
Strengths:
Small
3 screw for adjustments
Weaknesses:
didnt fit my Kapp Asa
one screw stripd
Review:
I bought this and i was impressed then i attached my 32 degrees on off and thought it was pretty cool but the when i go to get it off the middle screw strips and i have to push it off with a hammer. then i try to but another asa on it and it doesnt fit...
Conclusion:
Buy it if you know your asa is going to fit, and if you dont want to get it off
Tippmann 98 (not custom), Lapco Bigshot 12", Dead On pro seal, Shock tech super fly bolt, Halo frontman hopper, Lapco elbow, 48*3000 hpa
Smart Parts Ion, Smart Parts Q-Lock feed neck, Techt L6, Smart Parts 360 QVE, New Designs yellow composite trigger, Custom Products 2K5 On/Off ASA, Custom Products rail drop, J&J Edge Kit
Strengths:
Helped me get rid of the stupid duckbill
Weaknesses:
None as of now
Review:
This was so easy to install, and the asa slid in like butter. after i locked it down it took away the unessassary room the duckbill forced on me. this has maded my game more comforatble and tight, this set up with the asa makes me smaller than with a drop.
Silver 98 Custom
On/Off (32 deg.)
Rail Drop (CP)
Macroline Kit (32 degrees)
Grip (Extreme Rage)
12 volt Revvy(Viewloader)
Expansion Chamber kit (Tippmann kit)
2 20 oz. CO2 Tanks (Compressed Air is coming this summer)
14 in. Lapco Bigshot, 10 CP Classic Barrel, Tippmann Flatline
Rocket Cock (Physcoballistics)
Double Trigger (Physcoballistics)
Strengths:
See body review
Weaknesses:
See body review
Review:
This is a small drop that you can attach your On/Off too. I had a drop forward, but I took it off one day and my gun was really balanced without it (The Dropforward) so I bought this tiny rail drop
Pros-
Not too expensive
I got stickers with this
Made by Custom Products
Weaknesses-
The screws take a pretty small Allen wrench(I had to borrow one)
Nothing, this is an Inexpensive, Quality product.
Conclusion:
Go buy this, it is a great buy.
Rating:
10 out of 10
Last edited on Monday, February 21st, 2005 at 11:45 am PST
check it unimount on off version and inline version a bunch of other rails
Marker Setup:
2003 Smart Parts Strange Vision Impulse with strange team board (Uncapped, faster eye response)
With Bob Long Torpedo Reg
HSW V3 I-Frame
CCM No Rise
Custom Rip Delrin Bolt with O-rings(no blowback more shot to shot consistancy)
New Designz Slick shot ram shaft
New Designs Stainless midweight hammer with custom modifications (no kick, faster cycle rate)
New Designz Rip Valve
CP ASA Rail
Hybrid technologies R-Drive Stage 1 regulator
Dye sticky 3 grips
Halo B with Z-code
Pmi Pure energy 68ci 4500psi tank.
Strengths:
Look in review body
Weaknesses:
Look in review body
Review:
pros.
well let me think. Its a rail. well its stable durable looks good. and is very conveniant. I used to have a Dye Micro drop but switched over to the rail because I changed my grip frame which was moved a full inch forward so to compensate for the length of the gun I changed to the rail. personally I thing it fits so much tighter.
Conclusion:
some of you are thinking where are the cons?? well there are none. If you want a rail I wuld go with this or the hybrid technologies.
red polished dm4 with lbi board, xsf chip, conquest and reloader b
Strengths:
Easy to access the rail because the screws are on the side
Weaknesses:
None
Review:
Has no weakness and looks great on your gun. Also the cp jewel looks pretty cool on the side of the gun. There are three screws to hold the rail open. And it looks pretty cool on my gun because they have them in red black and chrome. I love this rail very cool.
Conclusion:
I think this is a great rail for the price given highly recommended
I've been a fan of CP's stuff for a while now, and the CP rail is yet another great offering from them. Its very easy to install, requires minimal adjustments and rarely needs to be tightened. Also, it looks great and is pretty inexpensive. I noticed a big comfort improvement going from even a small shocktech drop to this rail. Theres a reason why every pro uses a unimount now people, get on the wagon!
Conclusion:
Great product for a great price, definitely recommended to any tourney player.
Unimounts are the new thing. There's a good reason for it though. I can attest to the amount of comfort the unimount brings to the table. Removing the drop from my gun was the best idea I had had since inventing the internet. It puts the tank right up there in your shoulder, tight. Combined with a stubby, the unimount is far more comfortable than a drop because it makes the height of the gun considerably less. I suggest you combine this rail with the Custom Products on/off asa. They work great together and they look fantastic.
Conclusion:
Unimounts are the wave of the future. Drop forwards are on there way out, only scuba tanks really require a massive drop to bring them into usable distance. The unimount is the way to go and this is a supreme example of one,
ULE Mag
X valve, lvl 10
Y-grip
J&J 2-pc
12v Revvy
ACI 68/3000
CP Rail and on/off
Strengths:
-Position in which it puts the tank
-Price
Weaknesses:
Not for everybody
Review:
The rail/on-off combo is a great alternative to a Uni-Mount. I like the CP rail because it had side-screws, a pimp jewel, and it's pretty cheap. It allows more fine-tuning than a Uni-Mount, and you can also use it for rail-mounted adjustable tanks. The side screws are 10/32, which is nice because those are easy to replace if lost.
Conclusion:
Great if you're the type of person who dislikes drops.
