Tippmann A-5 w/ E-grip (A.P.E. Board)
New Designs Aluminum Power Tube
Shock tech super fly front bolt
Tech-T cyclone squishy paddles
Tippmann 6 position adjustable shoulder stock
Spyder Kingman remote line
Tippmann werks 14 inch barrel
Allen Paintball 450+ round hopper
Lapco A-5 MilSim Fore Grip
Zero Kick Hammer
Rhythm Innovation Hardened Armature Pin
Crossfire 4500/88ci tank
Aluminum structure for durability
This is a great after market front grip if you have big hands and/or looking for a more comfortable and durable front grip for your A-5. I knew with all the woodsball I play I needed a more sturdy grip for the rough terrains and I'm glad I bought this. The allen bolt included with the grip is the same size as the one on the stock grip, but you will need a longer allen key wrench for installation and when you have to take your gun apart for maintenance.
If you want a comfortable grip for your A-5 then this is the grip to get, especially if you play woods ball in a rough terrain environment. BUY IT!!......BUY IT NOW!!
Much larger than stock grip. Fits my hand nicely. Doesn't slip. Strong men need strong parts. Protects gas line better. Next is to fill the 50 word minimum a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
12' Tippmann werks barrel
jcs dual trigger
Better built and is bigger than stock grip. Looks great on gun.
A little more expensive than some other grips, but well worth the extra $$ IMO.
Looks great, is built great, and it is made from a great company. I do not have any wobble issues with my grip. It is very sturdy. The aluminum is so much stronger than the plastic of the original grip. I have seen some grips on the field that look awkward on the A-5. I have gotten nothing but compliments on my Lapco grip. Also, I have had other that do not even realize I have an aftermarket grip untill I point it ou; it looks that good on the gun.
stock foregrip - handles fine ;) just to short and made of plastic
dead -on foregrip - doesn't look right on an A-5,have to use washers
to keep it on tight. Though it is comfortable.
Phantom with bottom line,direct feed,detent rings,14"stock barrel,trigger shoe,50 rnd hopper,
Tippmann A-5,BT Apex,Lapco Microshot,Lapco Big Shot,Tapco 3 position stock,Red Hot Power Tube,Shock Teck Derlin Bolt,Aliuminium fore grip & 3 position sling(cannot remember the Co. names) & R-5 hopper & 50 rnd tac hopper,TSA double trigger.
Arikon Overlord,3 clips and holster attached to my vest.
BT-4,Shock Tech derlin bolt,A-5 Flatline,Empire B Reloader,BT double trigger
Autococker SF Tactical,twist grip feedneck,Redz Pepper Stickz barrel kit
And a few other older guns from Tippmann & Spyder
Longer than stock grip
easy to install
stays in place without adding washers
none that I can think of
Good solid easy to install aftermarket grip (unlike some others) not
to say that the stock grip isn't solid but doesn't feel right. It is to short
and i prefer the metal feel than plastic.
This grip is i believe a couple inches longer which gives you more room
to adjust your grip better than the stock one.
Also easy to install. I bought an aftermarket one from another company
and had to place washers on the long screw to keep it from unscrewing
no problems keeping this one in place just like the stock grip.
If you like the stock grip design you will like this grip just longer and metal
Takes the abuse of woodsball and scenario like the rest of the A-5
well, doesn't scratch as easily as I thought it would. Solid grip!
red hot power tube
lapco a-5 milsim foregrip
Its longer than the stock grip
A lot better than the stock grip.Its metal and not made of plastic.Its longer so i can grip it better. Im glad I ordered it.Great replacement grip plus its easy to install. Its cheap(price wise).Over all im glad i bought it.50 words is too much.
Doesn't tell the future
This replacement grip is easy to install, looks great, feels much better than stock grip (unless you have really small hands), and does not weigh significantly any more than the stock grip. Craftsmanship is typical of Lapco products: excellent. I give it five thumbs up. In order to make the minimum requirement of 50 words I am typing in this rather incoherent sentence for your reading pleasure, please disregard and enjoy your happy paintball lifestyle.
This is a great upgrade to your A-5: looks great, performs well, easy to install, and looks great.
Lapco 8'' Big Shot Bead Blasted Barrel
Lapco A-5 Long Foregrip
OPSGEAR AK Folding Stock
OPSGEAR UMP Gas Thru MAG
20 Oz Co2 Tank
Longer than the stock one.
Easy to Install
The Milsim and Long Grip is the same thing.
At first looking at the pictures of the A-5 on the net, I knew the stock grip was too short for me. I have pretty big hands so i ordered the longer grip for about 19$. It looks awesome on the marker and suits my needs. This is a very simple and cheap upgrade. Get this product, you will not be dissapointed.
A-5, Double trigger, Expanon chamber, 14inch twister empire barrel, drop forward, 68/3000 nitrogen tank
Well it came with my a-5 and i loved it from the start. It can be adjusted to fit your hand no matter how big or small and is made of good material. What can i really say about it, its with the a-5 and its the best since its on the best gun....
Ricochet R-5 hopper
32 Degree Heavy Duty Remote
Tabco Red Dot
Longer in length
Great for the look
The stock grip was too short for me because I have a rather large hand, and the new grip fits my hand perfectly. Also, it improved the look a little bit. Got mine for about $20 which is one of the cheapest upgrades you can do to your A-5.
Metal - not plastic like the stock one
Longer than the stock one
None that i have seen
I love this grip. I have big hands so the stock grip is way to small, i can barely fit 3 fingers on it. This grip is longer and it is made of metal so it is very durable. The bead blast finish goes along great with the black on your a-5. Lapco has made a great product with this.
This is a great upgrade for you a-5 and its under $20. How can you go wrong with this? On ebay you can probably find it cheaper i would guess between $10-15.