pbReview.com / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck
You've spent $1000 on your marker, $250 on your air system and $130 on your loader and you're using duct tape? Shaving and sanding are tasks of the past with this feed neck. Don't skimp on the necessities and secure your loader to your marker the right way. Why cost your team the game when your loader falls off when you can be sure?
Make sure that loader fits and it fits tight. Will fit VL Revolution, VL Evolution, VL Evolution 2, all Ricochets, and even the Halo B Loaders without shaving the loader neck or extra work. No more loose loaders moving around with this part.
The Check It Products Sure Fit Feed Neck is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Azodin Blitz Red Dust
Check-it Surefit Feedneck
3A 3000PSI HPA
Richochet 2K (VL Revolution Eye-force in mail)
It sure fits
Not snug with all hoppers
I've used a halo B and a richochet 2K on here, and it seems the harder plastic neck of the halo holds a lot better than the richochets thinner neck. I have to tighten the hell out of the thing to hold my richochet (back up) hopper, but it still doesn't feel that secure on there. But on the Halo, i have to make sure i dont overtighten, or i'm afraid i'll crack the neck.
It's not perfect, but it's pretty close. Like it, love it, wouldn't buy another one until the day this one breaks or doesn't hold my hopper at all
Blue SP ion PE 45/45 Core 3piece, HaloB w/ rip and vic board Check it sure fit neck
Low rise. Fits halos perfectly. looks good.
I ended up trading an old bolt for this feeneck a few months back. i have been suprised that it is holding up and it still turns heads. keeps my halo right were its supposed to be. and the feedneck stays on my gun . comes in colors to match any gun. its affordable
If you need an imp thread neck then get this one. specially if you are on a low budget.
I purchased this feedneck for my Piranha Evo (Impulse threading) and it is very nice. It doesn't have any writing on it like a CCM, and is simply sleek and does it's job very well. It lowers your profile so you don't have to catch so many top-of-the-hopper hits. It also makes my marker simply look better. Since it isn't a "no-pro", it holds more of the hoppers feed tube/raceway, which results in a more sturdy hold with a lower chance of breaking or having the hopper come out. Just be sure not to over tighten, you will crack you hoppers feed tube.
I most definately recommend it. I just wish I could find one with AKA threads for my Cyborg.
Cousin has same feedneck for his spyder. Other than that, no prior experience with adjustable feednecks (unless you count the plastic ones, which i won't).
ASP qev kit
AKA Sidewinder reg
Hybrid MSD & Grind
CP Twist Lock
Halo B w/ Rip
Cheaper than similar feednecks.
New Halo necks are too big w/o sanding.
Originally, i wanted the SP Q-Lock but they were out of stock at most places & i couldn't wait for it. i could've also gone with the Hybrid Hedlok but it costs more than i wanted to pay. So i ordered the Sure Fit instead.
And it works just fine. And after checking out the Q-Lock on my cousin's ion, i discovered i can't use it, anyway. i had cut the neck on my Egg down so it would sit lower on a different marker. Now if i had the Q-Lock, the Egg would sit so low that it'd touch the ion's body, therefore, not going completely into the feedneck on the marker.
Adjusting with an allen wrench isn't a major inconvenience & i can live with it.
Edit: Now that i've got a Halo, i need a new feedneck because it doesn't fit. I don't want to sand the Halo's neck so i ordered a different feedneck.
Good feedneck (if you don't have a new Halo), affordable price, reliable company.
8 out of 10
Last edited on Wednesday, August 3rd, 2005 at 10:20 am PST
- Rat Jr. impy # 292
-Voodoo delrin bolt
-Ti pull pin
-Stainless steel Evil hammer
-Eclipse blade trigger
-Smart Parts "sticky" grips
-High volume front cap drilled for LPR
-Vertical Maxflo Reg
-New version of the cricket board
- CP drop foward with CP asa
-clamping feed neck
-evo II with y board
-Is that better TPD??? lol
It fits to all or most hoppers and it is easy to use
None that i found
Good product, i dont have to spend the 20 mins to tape my evo just right so that it fits and stays there, now i can get it in and tight in like 30 seconds. and then back out in like another 30. looks nice too and is shorter so my evo stays shorter as well, though it is still tall.
EDIT- SATURDAY NOVEMBER 13TH, 2004
today when i went out p8ballin, for some reason, it got really hard to turn it, i greased it and it still didnt work, like so hard the i couldnt do it at all. no one could. so i had to give it to the shop and they fixed it usin a machine =\, ya ok cool
If you hate sanding or taping, get this, this is cheap and a nice upgrade.
10 out of 10
Last edited on Monday, November 15th, 2004 at 3:43 pm PST
-New dezignz 15 degree angle ASA
-Equalizer bolt w/ brass hammer
-6 inch drop
-88 3k pure energy
-WAS equalizer board
-Evolution 2 Hopper
-Check It products adjustable Feed
-NDz LPR Setup
Adjustable, Good for Eggy 2s
This is an awsome product. The whole reason why i got it was because the evo 2 hopper doesn't fit in the stock impy vert feed. And also the Check it neck is shorter making it better for the eggy 2s sensor system. it is easy to install and easy to adjust and use.
Get it because it works and that is usually why people by the stuff they do!!
Blue Impulse w/ Vertical Regulator, New Designz Equilizer Bolt, New Designz RIP Valve, Check It Lowrise Clamping Feedneck, Crossfire 68/3000 HPA & Smoke Egg II with Z-Board
Puts the hopper way down
No need to sand
Fits any hopper
you WILL chop, unless you have a halo or vision
This is an awesome product if you have a halo, or some kind of eye system in your impulse. This puts your hopper really low, and also hold any hopper. I got z-board for my egg, before i got this and no chops, I got this and now I get at least one chop every game.
DO NOT get this unless u have a halo or some sort of eye system, you will chop with anything slower than a halo, even a z-boarded eggy.
Stock Rise-to tall and not enought room for the hopper
68 Carbon tank
Low, grips tight on the hopper, looks cool, flawless design.
The only weakness is that you may chop with a non vision impulse
This feed tube is the best i've seen. It clamps on every loader size and so the hopper won't fall off, ever! It has a hex screw to tighten it to the loader then you are ready to play!
I am very happy with my purchase , Very well worth it. FLAWLESS!
Get it if you struggle with sanding and if you use different sized hoppers Halo Egg Revy etc
ANS Jackhammer 2 LPR
Clamping feed neck
Custom Product Regulator
Voodoo Bolt (soon to have a Rat Factory Kit).
It grips your hopper no matter what hopper you use
I would recemend this product to anyone. I would say get this as your first investment because it is cheap and gets the job done VERY well. I used to have a Twister High riser and it put my hopper about 6 inches away from my gun, and now that I got this my hopper only sits 1 1/2 inch away. This helps you keep a low profile, and also looks sweet. Your hopper will not fall off if you just tighten this.
Installation is easy: get a lighter and heat up the old neck near the bottom for about 30 seconds then get a wrench and a cloth and twist off. You might need to heat it up agian if it doesnt come off easy. when you get it off just twist the other one on.
Just buy it, You will not regret it.
10 out of 10
Last edited on Tuesday, June 22nd, 2004 at 8:09 am PST