Do you want to shoot FAST?
You don't need the fingers of a piano master!
This trigger allows for the ultimate in Intimidator triggers.
Ball bearing allows the trigger to ride as smooth as glass.
Aluminum construction provides the user with a very light and sturdy trigger, for the best possible trigger pull.
Friction free design allows the trigger to return faster, so it spends less time coming forward, which allows you to pull it like a machine gun.
The Custom Products Ball Bearing Speed Trigger is newer, so it should be commonly available, both new and used.
It is alot easer to setup without bounce, no more side to side slop.
Very hard to get it to bounce, only one design
This thing was fun to install. The stock trigger pin is to big, berring sticks from factory, and it is very easy to have to much oil on it so it sticks. but once it was installed i could not get the trigger to feel right. I couldn't get the trigger to bounce if my life depended on it. That is a good thing for some but i like my trigger to slightly take off when i really get in it. but pulling the trigger from the side is much easer than the stock one.
It is a decent buy. But i would buy a new bord before the trigger.
Matrix LCD 04, Black
PE 68ci 4500psi
Dye Rhino Tank Cover
Eggy II w/ Z-Board
CCM No-Pro Feedneck
WGP STO Kaner Barrel Kit
Check it Uni-Mount
A better Bolt (haven't chosen yet)
CP Snatch Grip
Dye Sticky Grips
Generation-E Magnetic Grip Frame
Good looking, THATS IT!
Trigger pin WONT fit inside the bearing
Bearing popped out of trigger
I bought this a few days ago and was very mad that it didnt even work because my trigger pin didnt fit inside the bearing, the bearing stuck and didnt turn easilly at all, and the bearing fell out when I tried to force the pin in because there was nothing else I could do, and YES I HAD THE RIGHT SIDE OF THE PIN GOING INTO THE BEARING OF THE TRIGGER.
horrible DONT BUT IT, unless ur shure it will work, but you cant be so dont buy it
If you REALLY wanna see my setups... which I doubt, go to:
- VERY light
- Slight foward angle
- Zero friction
- Absolutely nothing
When I got my Proto, I liked the stock trigger, but it just wasn't... enough. It bounced easily (bad), and I just didn't didn't like the feel in general. Out of all the triggers I've had the opportunity to shoot, this has been be far my favorite, not to mention the price is right. And those ball-bearings are definitely NOT hype, they make the pull so much smoother. The lightness helps in the return speed, and the pivoted angle on which it sits really makes walking easier.
Honestly the best trigger I've ever layde my fingers on, with the occasional rare exception. (Techna, etc.)
9 out of 10
Last edited on Monday, July 18th, 2005 at 9:09 pm PST
2004 Warped Dark Impulse Ultimate Package
Warped Lucky 15 one piece barrel
Warped Dark Bolt
Custom Products Stick Trigger
Custom Products Snatch-N-Grab
Nitroduck fiber-wrapped 68ci/3,000psi tank
Dye 04 Rhino cover
Smooth trigger pull
Works with a spring or magnet
Hard to install, the diagram on the instructions isn't great
I bought this trigger a few weeks ago, and tried to install it myself. The instructions aren't very clear, so I took it to a paintball pro shop to have them install it. I left my gun there, and about 30 min later, I got a call saying that they didn't know how to install it either, and wanted the instructions. I went back up and stayed there untill it was installed, all and all taking 45 min to figure out. Once it was installed correctly, it was a trigger pull as smooth as glass. The only thing that can happen is that when you pull it back, sometimes it will stick there. The best thing to do is put a drop of oil on the ball-bearing, and one drop behind the trigger. It will lube itself and remain that way for about a month before you need to re-oil it.
This is a great trigger, it just requires a little bit of hassle to get into the gun. Once it is in, it is great, by far one of the best triggers I have ever pulled.
Dye MaTrix LCD
Custom Products 14" .689 Barrel
Custom Products Grip Regulator
Custom Products Razor Drop
Custom Products ASA Adapter
Custom Products Bearing Trigger
Custom Products Snatch Grip
PBC Low Pressure Regulator
Crossfire 68/4500 Blue
Halo B with Rip Drive
Chipley Machine No Rise Clamp
Dye Rhino Tank Cover
Short trigger pull
None except you have to sand down the trigger pin before you can install it...
With my Dye MaTrix it was important to me not only looks but the function of the CP trigger...the stock double finger grooved trigger was good but not great...with this blade roller bearing trigger the guy at Johnson Paintball Supply got it up to 22 bps...however with me...the old stock trigger I got it to 14 bps...but with this one I got it to 18 bps...my gosh there is a sweet spot on the trigger and I can go full auto...but a Halo is a must...the only thing is the sanding of the trigger before installing but no biggy...the shop did it for me...
If you want a better adjustable trigger pull/full auto/sweet spot trigger...get this only $30
The accuracy of this review is disputed. Please see discussion on the comments page.
Period of Product Use:
Less than a month
1 of 3 people found this review helpful.
Similar Products Used:
Stock Matrix Trigger
Gen E LCD Matrix
Tadao V4 Board
Halo B Victory Board
Smooth trigger pull, with no side to side shake.
The back end of this trigger (inside the frame) is too long.
The back end of this trigger is too long which doesn't allow you to move your trigger forward that much. Becasue of this you can only move your trigger forward a tiny bit. So if your like me and like to have a little play in your trigger this isn't the one for you.
If you own a stock Matrix trigger frame and want to be able to adjust your trigger in order to give you some play this isn't the one.
this is a nice trigger.
nice as in it is light and has a better feel then the ridged stock trigger.
hand in hand on comparision on the two trigger, the CP trigger is ligher, smooth finish and angled differently.
once installed and adjusted, it gives better clearance in the trigger area than the stock.
The ball bearings reduced the friction and makes of easier movement.
adjustment is okay, though, it seems to be easy to strip the hex screws. so adjust with care.
one problem i found was it sticks a little. this is due to the very small tolerance inside the trigger frame. This is from the gloss paint, that adds like a few microns of depth. Once sanded or filed, and greased with lithium white metal grease before the install it's smooth and fluid.
another point that sticks is, when adjust the hex screw for the back movement, within the trigger guard, the screw will notch itself into the frame, into the paint. I smoothed that part of the etched paint behind the trigger and added a little touch of grease and problem solved.
This does not improve rate of fire, but does change the feel of the pull. This is a light trigger and is pretty much dependant on user preferences.
i recommend to those that like the blade-like triggers. The ball bearing helps in reducing friciton which is a big plus