16" Smart Parts Linear barrel
Double trigger kit
Much better grip. Higher ROF
None really. A bit of a long trigger pull..Hard to walk it quickly.
I picked this up for around $22. So far, it's never let me down. You get a much better grip on your marker, therefore allowing you to get a higher ROF. The only major problem is that you can't really walk this with the stock parts. I assume this gets easier with something like the RT kit.
I suggest you run out and get this. It's very quick and easy to install. This is much more comfortable then the stock trigger. You'll throw more paint than what you could have with stock.
- Easier to find "sweetspot" with RT
- Easier to walk trigger with eGrip
- Unsafe (see review)
I was able to pull off a real bargain on this one, as I was able to buy this one for only 13 euros. I found it was useful in combination with the RT, especially in finding the sweet spot.
After purchasing the eGrip, I still left it in just to check if it would be more comfortable than the stock one. There wasn't much use for it after finding out I liked full auto the best.
Then I found out something pretty dangerous; when I was taking my marker out of my marker bag, it went off while the safety was on! I was happy I hadn't hooked up air yet, so I went to see what the problem was, i found out that you were able to get past the safety by pressing the trigger first to he right front, and then pulling it back to the right back. This way you were still able to shoot with safety on. After switching back to the single stock trigger, the problem disappeared. This problem didn't occur with the stock mechanical or the response trigger.
Pretty good upgrade for RT (or mech.) for the money, but be sure to be careful when using it in combination with the E-Grip. Since it is somehow unsafe, it only gets an 5...
Tippmann A5, tippmann flatline barrel, tippmann response trigger, jcs red hot power tube & front bolt, gta double trigger, opsgear mp5 mock magazine, opsgear mp5 pdw folding stock, 20oz tank w/ rampage remote
-works with standard grip and egrip
Might not work with response triggers
I bought it when i bought my gun. it feels much nicer and more stable to have two fingers on the trigger over just one, and allows you to pull the trigger faster. it worked great with my standard grip and egrip.
however when i bought a response trigger, its shape would not allow me to pull the trigger with it installed. i immediatly bought a gta trigger, and it worked fine. it is possible that it was my bt trigger in particular, but if your planning on getting a double trigger and a response trigger, id get the gta just to be sure.
Its difficult to recommend the bt double trigger, because the gta trigger works just as well, and is compatable with both egrip and response trigger. they are typically about the same price (sometimes the gta is a few dollars more expensive)
7 out of 10
Last edited on Tuesday, March 27th, 2007 at 1:20 pm PST
Trigger is way easier to pull than single trigger, comfortable feel, good look
Can cause problems if not installed correctly...as most things can
I purchased this at the same time that i purchased the E-grip and I did not pay much attention when installing it. The double trigger comes prepared to be installed on the stock trigger and there is no notice that tells you that you must remove the silver metal piece at the top when installing on the E-grip. If you dont remove this piece your gun will triple fire on semi auto and break tons of balls and the cyclone feeder can be annoying to clean. Now that I have properly installed the double trigger on my E-grip I am very pleased with it's performance. It is signifigantly easier to pull than the single trigger and feels comfortable.
I would definately recommend purchasing this if you are only allowed to use semi auto on your local playing field and you have the E-grip.
Tippy a5 w/ proto one piece barrel, double trigger, dead on front grip, in line pressure gauge, 20 oz co2
Easy to install.
This is the best 20 bucks you'll spend on your a5. its very durable and looks better than the original. The trigger isn't as stylish in my opinion as the blade double trigger, but the standard trigger was just so ugly. Plus it will help you shoot faster, and is easier on your hands.
No reason to not buy this trigger. Its a very good product and its quick to put it on the gun. go buy it. I'll only give it a 9 because in my opinion the a5 should come with it standard.
This is a very good product by BT Design. It is very easy to install. All you have to do is pop the trigger frame then remove the trigger assembly. From here you replace the old trigger. Them you unscrew three screws in the trigger frame. This splits the frame and allows you to remove the old gaurd and add the new one. Put everything back together and you reinstall it into the A5. Its quick and easy.
It works the same as the original trigger. It is good if you like to have two triggers. I have found that it is easier to fire fast with two triggers.
This is a good thing to get if you like the feel of two triggers. It also seems to help you fire faster so i would recommend that you get it because it is only like $20