Tippmann 98 Custom
AIM Shock Regulator
BT Double Trigger Kit
Viewloader 12V Revolution
Rocket Cock II
AIM Skyforce Drop and On/Off
Daisy Red-Dot Sight
I bought this trigger to replace my stock single. With this frame, you don't have to cut your grips, and that was a plus for me. I plan on buying some DYE Stickies, and I don't want to deface them.
Its hard to "walk" a 98C trigger, even with a double trigger and the penspring mod. I can now shoot about 10 bps no problem, but I usually don't. The main reason I bought the trigger was to make shooting 3 and 6 round bursts alot easier, which it has. Quick snaps from around bunkers are always better if you can send out 3 shoots instead of just one.
The trigger has the feel of the stock trigger times two. I'm pretty sure its the same kind of plastic.
The double trigger look makes your 98C stand out a little bit more. Since very many people have 98's, its always good to make yours stand out more in the crowd.
The only real problem with the trigger was that the safety. It didn't fit right for a few weeks. After a few times playing, the safety wore into the trigger and now it fits fine. Apparently because it wore in, I can now shoot my marker with the safety on (don't worry though, you have to pull the trigger really hard to get it to do that).
If you have about 15 bucks and want to shoot a little bit faster and easier, buy it. Its a simple mod that will give your 98 a new look. I give it an 8 for the wobble, plastic, and the safety.
tippmann 98 c
, dye ultralite 14"
, double trigger
, crossfire nitro tank
, 12 volt revvy
Unbeliveably faster then the single
Much liter pull cuz of leverage
Cost'd so fricken much but i did get it for 40$ @$$ holes
this is a must buy for all you tippmann 98 custom guys out there that don't want to spend 150$ for a e system installed. i don't no what ne one is saying about u have to cut ur grips i didn't and it worcks perfectly no wobling at all fits exaclty in. you can use just ur middle finger to shoot or like me tap it with both fingers and you can GO fast.........
This is a must buy cuz it's not that expensive in most places just do ur shopping and ull go from like a 2-3 balls per second to like 5-6
tear drop barrel
Black Diablo Wrath
FBM Blade trigger
first of all i got r/t formy 98...then I wanted the double trigger, I took it home, put it in, and the safety wouldn't move. Then I sent it to tippmann, since there was something wrong with my valve...fixed it up PERFECTLY!!!I shoot 12bps with ease. the trigger guard broke off too easy, but other than that a great product.Also without the trigger guard there is more room for your fingers
Buy it and max out your 98's ROF
9 out of 10
Last edited on Monday, September 4th, 2006 at 5:37 pm PST
J&J Ceramic 14"
BT Tippmann Double Trigger
Viewloader eVLution II
*Soon to Come* - Flatline, Compressed Air and Response Trigger
Dont have to cut grips
Installation can interfere with the safety
Pull seems a little long
Ok, when i first bought this, I thought installation would just be to open up the gun, take out the old trigger, and put this in. But After I did that, I noticed the safety wouldnt work anymore. I just pounded on the safety side that was stuck and it worked again, although now my gun can still shoot on safety if pressed hard enough, and that has never happened before.
I Personally think that this trigger is ok for what it is. Although the pull is kind of long and there may be some difficulties with the safety, i still like this trigger. For starters i would reccomend this trigger over the other Tippmann trigger since there is no cutting of the grips involved. For 20 bux, i say this is a good trigger for the Tippmann that can work with a response trigger.
9 out of 10
Last edited on Thursday, July 28th, 2005 at 8:38 pm PST
Tippmann 98 Custom – Silver
BT Double Trigger W/Guard
Zap Mach 404 Hopper
Pure Energy 20 oz Co2
Lapco 98C Thread Adapter Old/New
Custom Camo Job
Conquest Gladiator Mask – Black/Amber Lens
Tippmann 98 Custom – Black
DOP Double Trigger W/Guard
GTA Response Trigger W/ Custom mill work done
14” Smart Parts Progressive Barrel
14” Hammerhead Clamshell 8pc. Barrel System
Smartparts Freak Back W/ 4 Stainless inserts
Lapco Rocketcock II
Viewloader Evolution II Hopper
Evolution II Z-Board
JCS/Blackpoint 98C Thread Adapter Old/New
JCS/Blackpoint 3” Sight-rail Offset
Hotshot 30mm Red Dot Scope
Rufus Dawg Delrin “Wicked” Bolt
DOP Pro-Seal Power Tube
Dark Horizon Titanium Hammer
32 Degrees Coiled Remote W/QD
Pure Energy 20 oz Co2
Custom Camo Job on all exterior
Conquest Gladiator Mask - Camo/Smoke Lens
Rage 2 Tube Pouch
Tippmann A-5 – Black
GTA A-5 E-Grip
Ricochet R5 Sniper Hopper
14” Tippmann Werks Barrel
Lapco Grip Adapter Block
32 Degrees Coiled Remote W/QD,SC
2 – Pure Energy 24 oz Co2 tanks
Modified Rage 6+1 to 6+2 or 6+3 Harness W/ Suspenders
Home Made 3 in to one out Air Selection W/ Shut Off Valves
JT nVader Mask W/ JT Vortex II Fan – Camo
Custom Camo Job
Same manufacturing as stock trigger, even same kind of plastic.
Every thing is alright on this product except for one thing the area around the safety is a little too large and needs to be filed down or engaging the saftey is very difficult. All you need to open the area up is use a round file or even a razor blade to open the area around the safety just enough to let it engage properly. Other than that you have a very durable product.
If it is your only choice go ahead and get it . Fixing that problem only took a few minutes to fix and most of that time was looking for the file.