One hole tuning bolt for intimidator with pull pin.
This product is made of polyoxymethyl/ POM which is an easily sliding and self-lubricating plastic that makes any scratching of the marker impossible. Carbon being both light and hard material is used in places that are stressed by friction
Weight: 18.6 grames / 0.6 ounces
The Orange Paintball Procheck Intimidator Carbon Bolt is newer, so it should be commonly available, both new and used.
2k5'd Black-to-red fade Timmy, WAS Equalizer 2.9, CP directmount, Critcal Frame, Evil front block, Eigenram, Hybrid adjustable cap, Empire Balanced Ram Sleeve, Kila Magnetic Detents, FBM Hooker 1 piece No Rise, Hybrid Verdikt LPR, DYE Hyper 2 regulator, Stock 06 Bearing Trigger (BEST TIMMY TRIGGER EVER) with magnetic mod, Russian Legion grips, Alias solenoid, and all High-Flow barbs and hosing. Not to mention the LP 68/45 P.E. tank, Powerlyte barrel system, and Halo B with Hybrid Suicides.
Piranha Evo with FBM Choke Chain feedneck and blade trigger, Powerlyte Speedline, Shocktech Supafly bolt, Evil Valve Kit w/VL valve stem; NO LEAKS!, 32 degrees springs, Twisted Volumizer, CCM reg, Polished Hammer (did it myself; dremel owns) Custom Products rail and On/Off.
Comes with a very light valve spring as well
Has cool jewels.
The delrin bolt pin is known to snap, see review
Well, I purchased my Orange PB bolt for the 2k2-style Timmies about 20 cases back, used even, and it had never failed me. However, I decided to write this review once the delrin bolt pin snapped in the middle of a game (argh!). I contacted the company, and after two emails (one for my address) they had sent me a brand new aluminum bolt pin and tools to install it, no questions asked. Definitely THE BEST customer service I have ever experienced; better than PMI, which is a company known for it's great customer service. Honestly, even with the aluminum pin over the delrin, it's difficult to notice the bolt being any heavier. And it still works perfectly, I've never had any problems with this bolt after about a year of use.
I would say it's definitely worth the asking price, being that it's the lightest bolt out there and has an excellent customer service department behind it.
-Ball detent slots
-Weak plastic pin
-A Little flimsy
To start with, this bolt did not fit my 2k2 body by Aim, the end did not fit into the body itself.
(I did order the 2k2 style bolt)
I ended up having to shave it a little, which did not affect's its performance because its just for looks.
After that it was smooth sailing for a while, the bolt worked pretty well, hard to say if it was as accurate as my last bolt, I didn't have a chance to compare them together however what made me go back to my last bolt is the fact the PIN BROKE.
It was not very sturdy...After examining what had happened when my marker stop shooting normally, the PIN snapped as I was making a move while shooting down the field.
For the price of this bolt, it should not break while putting it through normal use, expect it to break if you like to shoot your timmy.
It seems like they do not last very long, and I haven't seen replacement parts for the orange bolt...And replacing the pin with a metal one only compromises the lightweight construction, in other words it isn't worth it...maybe they could have made a carbon fiber pin?
I'm giving it a 3, if the pin was stronger I'd give it a 9 or a 10.
3 out of 10
Last edited on Wednesday, April 12th, 2006 at 12:05 pm PST
Stock bolt- good if you dont want to spend money
ST bolt- I dont like that bolt scrached easily, and just not a fan of this bolt
A+- have had nothing but problems (probably just my bolt cause there stuff is usually good)
Hyper flow barbs
AKA SCM and volumizer
Alias Ram sleeve
CP Ram adjuster
Dagger Techna trigger
REDZ cam lock, on/off, and pepper sticks
Looks good with my techna trigger
easy to clean
I'll explain in my review more: Really short, tech support, and cost.
This is a really sweet bolt its light and looks good. Another perk is it comes with a new super light valve spring (never seen one this light before) and with extra orings so it will fit good in any timmy (alias or 2k2 respectively) with a "tight" fit. My timmy now has majorly reduced kick, there is still some but really cuts down. The light spring allows for lower dwell and I assume higher efficiency (I get alot of shots per 45 i don't measure it since its good enough to play 3-4 games and still have air).
Its short if you are the kid throwing you gun in the sand and dirt, dirt will probably get in when shooting cause the back of the bolt is in line with the opening where you see the ram. I play hard too and dive and what not and have yet to have a problem
The cost is quite high for a bolt $60, but is is carbon fiber and one of a kind as for timmy bolts, if you have the money its a good buy, if not just mod your stock bolt to get that lighter and keep the stock.
Tech support ive emailed them a few times and never got a reply maybe there was some problem with the email i don't know, but the friendly people of the timmy forum solved my problem
It does cost a bit, but it is carbon fiber. I like mine and have had no problems. If you dont have the money to buy a bolt the stock ones work good, but if you do want to buy a bolt this is the one to get.
awesome bolt, nice design and from a great company, i suggest you go buy one immediately, you'll love it, have not had a single chop since its been in my gun, and its one of the sturdiest bolt i have ever touched,seen, or read a review on. Orange paintball have always had great products.
Alias Timmy, Orange Bolt, MacDev Legionair, Dye Ultralite, Empire Reloader-B w Rip-Drive.
Size & Weight
Exposed Working Parts
I bought the Orange bolt more out of necessity than want, but lets not drone on that! I loved the fact that it was a little shorter than the standard Alias bolt. This means that I can actually insert the bolt into the gun and line up the pin with the hammer notch by looking at it instead of the usual guessing game. This advantage also turned out to be a disadvantage. This gap also means that dirt can enter the moving parts a little easier than with the standard bolt.
After inserting the Orange it seemed that my rate of fire was a little higher. I don't know why and frankly it does not make sense to me. Surely a couple of grams does not influence this and after all the rate of fire is electronically regulated.
The bling-bling on the back of the bolt is pretty neat but it does nothing for performance.
To me any money spent on looks is a waste. Who care's what it looks like when you turn that guy into Xmas tree.
Some rumors are doing the rounds that this bolt snaps, but I have no proof so I won't take it serious.
After about one year of use the bolt did crack! I found this top be unacceptable. I wrote to Orange to find out what can be done and I am awaiting their responce.
Not a bad buy!
8 out of 10
Last edited on Thursday, April 20th, 2006 at 12:32 pm PST
Black/Blue Dragon Intimidator
Black CCM clamping mid-rise
Orange Paintball Procheck bolt
Silver AKA Sidewinder
Blue CP roller trigger
CP magnetic trigger mod
Blue SP wood grips
2k2 white matte paneling and trigger frame
Silver Shocktech mini-drop
Air America Apac
Excellent Customer Service
Lightest bolt on the market
No lube needed
None as far as I can tell
As I said about Titanium Paintball's Longbow system, if you want the best you are going to have to spend the money. I think I spent $40 on this bolt, and depending on where you get it from and how much of a markup they have you may spend more.
I love this bolt. Ever since I heard about it from a guy at a paintball shop in NH, I have loved it. Before I even owned it I was raving about it.
As far as I can tell this bolt doesn't affect my performance (accuracy/consistency) at all. But how many bolts do you know that do? Not too many...if any. The main selling point on this bolt is that it is light. With my timmy I need as much weight reduction as I can get.
Find someone with this bolt (I live in Maine), and try it out. Just holding it will amaze you. Soooo freaking light. I bought one for my E2 as well.