This is the most dramatic mil-sim marker modification OPSGEAR has ever produced. Never has a single component so significantly transformed a vanilla Tippmann marker into a mil-sim monster. Not only is this new shroud pragmatic, but it carries with it the emotional punch of the most lethal sniper rifle in the world, the M82A1. Be sure that this marker accessory will attract attention on the field and remind your competetors that it takes only one shot from an experienced marksman to take them down.
The OPSGEAR Raider M82A1 Shroud is newer, so it should be commonly available, both new and used.
my first from ops gear soon to get the AK47 A-5 setup and the G36.
A-5 with the M82A1 full body kit, shroud, clip, muzzel brake, butt stock.
Very rugged and strong will take a pounding.
With all of the options and addons you can do can get pretty heavy.
If you have a problem with heavy guns dont get it but if your a player looking for the most awsome gun on the field regardless of the weght this kit from OPSGEAR is it, i panted mine a black,white and gray urban camo sceen and has a large scope with red and green crosshairs,also with red and green dot 30mm scope and a bipod dont need much after that.
It looks great, scare the neibors and the kids at the fields, its tough. some issues getting it all together but if you just work at for a bit it goes together nice and smooth, the kit i got dosnt set in with set screws mine is held on by the push pins from the A-5 it self and very sturdy just dont break off the tabs, if you do either weld them back and the repaint or jb weld it to gether,but if you jb it dont get in a hurry they will come right back off, take your time and itll be cool.
With OPSGEAR 18 inch barrel for the kit is great, straight shots and dosent seem to hurt fps of the gun at all, looking threw the barrle is like glass its so smooth, very accurate barrle top notch product, deffintly going to repeat buissness with OPSGEAR in the future and check out RAP4s new 11mm paintball gun the desert eagle if you get the chance im getting that, later.
Get it you wont hate it if you do go back to laser tag
Richochet R-5 Hopper
6 position CAR Stock
Warsensor Remote Line
M82A1 Carry Handle with NcStar 1x42 Red Dot Sight
Raider M82A1 Kit, Includes:
M82A1 Body Shroud
M82A1 Box Magazine Kit
M82A1 Muzzle Brake
18 Inch Fluted Interceptor Barrel
Ideal platform for sights or other accessories
4 set screws grinds down rails on the A-5
When I got my shroud from OPSGEAR some 6-7 months ago I was completly taken by surprise - MAN IT LOOKS LIKE A KILLER! It didn't come with any instructions on installation but there is a link on the OPSGEAR website to help you out. Once the 4 set screws were in place the thing was ROCK SOLID. Of course for those of us who aren't fans of set screws taking the shroud off can be annoying and after a while the rails can grind down something awful. Recently my A-5 rails were so bad that the shroud shunted and jostled with all the screws in place! A good remedy though is to fill the ground areas of the A-5 rails with some JB Weld, sand it smooth, and re-install the shroud and it should be good as new (worked for me). The abundance of rails is great for your tactical needs, especially with the Carry Handle and any Red Dot Sight.
All in all an excellent product it has its problems in the long term but there are solutions. Just too bad the M107 Shroud has replaced it.
9 out of 10
Last edited on Tuesday, June 3rd, 2008 at 5:56 am PST
Rhythm Innovations Magnetic Trigger
Low pressure kit
Everything Tech T Cyclone Feed
18 in. intercepter barrel
red dot sight
off set hopper
Very cool looking, alot of compliments
alot of rail space.
Plastic weaver rails
this is a great kit if you get the whole kit. it looks ugly if you mix and match it. it can get a little heavy if you start to put things on it (sight, flashlight, etc.). nice paint on it. i have had it for two years and it has just now started to wear down.
the only downside beside it being a little heavy, is the plastic weaver rails. it isnt cheap plastic, but is you tighten the skrews down to far it will crack the rail. ( I speak from experience)
It is a great looking shroud with alot of weaver space. But you might want to start working out if you plan to play an 8 hr game.
I review products based on three factors: Installation, Functionality, Aesthetics.
The M82A1 shroud did not come with any installation instructions, although it was very self-explanatory. It seems like this shroud was meant to be put onto a stock A5. I added the LAPCO Spyder to A5 barrel adaptor to accommodate my Scepter kit, but the adaptor adds an extra 1/2" to the overall length. This was a little too much for the M82A1 shroud. Getting the shroud on is not too bad, but getting it off is very difficult. That extra 1/2" makes it very hard to remove. I scratched the adaptor with one of screws on the shroud trying to get it off. With practice, I was able to install and remove the shroud without any problems, but the first time was a little difficult.
I'm not very fond of the set screws, but I guess there's no other way to get it to stay on the A5. I should have had the foresight to place electrical tape where the set screws are placed because the body of the A5 is a little scratched now. Nothing that can be seen, but it's still a little disheartening. It would have been nice to have the shroud attach with the locking pins, similar to the newer version of the UMP shroud.
Another issue is trying to get the shroud on straight. When I installed the barrel, it was very difficult to screw in because it touches the side of the barrel opening on the shroud. Is my shroud on crooked? Is the hole just not quite centered? I'm not really sure, but it definitely makes installation and removal of the barrel more difficult.
This shroud definitely looks amazing! OPSGEAR did a great job with looks and intimidation factor. Incredible may be the proper word. There's plenty of weaver space for all sorts of accessories. However, a riser mount seems to be necessary for a red dot sight. Also, the shroud eliminates any use of the sights. It's just not possible to get your head and mask low enough to see the sights. Additional flip sights are required if you want to be using iron sights. The eight inches at the front of the shroud make a great hand guard. In combination with the stock, the marker really feels natural to bring up to the shoulder.
Finally, this shroud can really add some weight the gun. It's around 2lbs, but with the addition of a stock, barrel, riser, scope, hopper, and paint, the gun can become cumbersome. At one point, I was carrying around 9lbs! Overall, this is a great addition to the A-5.
This is a great looking addition to the A-5. It's very intimidating, and the weaver rails give alot of options for accessories. The installation was a little tough at first, and I'm not fond of the set screws. However, after some practice, the shroud can be installed and removed with ease.
Cool, lots of rails and mounts, style, not as heavy as it looks,
Heavy, changing the barrel is a pain.
I got a dealer to order it for me took like 2 weeks but he bought it from another dealer. it wieghs a lot but i got used to it if you can't handle a few extra pounds your a wuss. had some people asking to be on my team. the biggest problem i had was changing the barrel you can't just take it out like they say, the barrel was having to much trouble screwing in so had to keep the shroud unbolted to put it in then bolt it up it was a pain needs a sight rail and a forward sight cause theres no sight at all but i knew that when i bought it so thats not a problem easy to aim even with a rail i find its to small to look like a m82a1 like an airsoft gun but thats ok i used it as an assault rifle shroud which looks good. although im not sure but i think the m203 shroud came out after i got this and i wish i had gotten it instead for the style of gun i made. still great though thats about it .
Good product all in all some small problems i would recomend it.
Tippmann a-5 with response trigger
NCstar 42 mm red dot
3/8the weaver riser
14" J&J ceramic barrel
offset hopper adapter
Built like a tank
Easy to modify
LOTS of Picatinny mount possibilities
Expense to value ratio
The latest price at Opsgear for this item is $79.95 not including shipping. Mine arrived quickly, and was easy to install using 4 hex screws that tighten on the dovetail. There are some small scratches on the mount as a result, but it is hardly noticeable...even with the shroud removed.
I cut off the last 5 inches or so...about where my SAW stock attaches. The material is hard steel, so I had to use a die grinder to do the job. This did cut down on the weight, and made it easier to look into my sight. I also removed the upper forward picatinny mount because it was unused, and filled the holes with 8/32 set screws.
I am very happy with the look of the shroud, as well as its utility. I have mounted a bipod, weaver riser and red dot, and have plenty of room to mount laser sights and flashlights should I be so inclined.
Although expensive, I could not see fabricating an item like this myself. I am happy with this product modified and installed on my a-5.
Tippmann Model 98 M82A1 Shroud - Black
M82A1 Muzzle Break
Tippmann Model 98 Fluted SNIPER Paintball Barrel - M82A1 (18 inch)
Tippmann Model 98 Gas Thru MAG - M82A1
Tippmann Model 98 Stock - SIX Position (Out of Stock)
Tippmann A5 TAC CAP Loader
NcStar reddot sight
MIL-SIM Universal Weaver BIPOD
Nice layout, plenty of rails, good comparison to the M82A1
total package = HEAVY, dont plan to run around or shoot on the fly.
For the perfect "scenerio" Sniper package, it doesnt get any better than this, the intimidation factor alone is enough to scare new players and even some seasoned players. The versatility of location of rails is great for a vast number of accessories, sights, lights, nvg, laser, you name it theres a home for it. The Bi-Pod is a must have if your prone, this badboy is no lightweight. the materials are durable and realistic.
Hands down this has got to be the baddest scenerio sniper package on the market, the feel of a M82A1, the look of the M82A1, and the pure intimidation factor of the competition. In all a great product.
16in armson interally rifled barrel
six position car stock
soon to be:
G36C 12in barrel
G36C solid stock
It scares the sh!t out of people
Weight is the only problem
ok, woopdee frikkin doo, it's not as "long" as the real gun! so what! this shroud is great for any tactical player who just can't fit everything on their gun. I would recomend a raised sight rail if you want to see out of a scope but other than that this is a great shroud. It may be a little heavy for younger kids and is a little front heavy but if you have the right stock, remote line, and possibly a bi-pod you should be fine.
I am giving this product a 10 out of 10 because it's durable, has lots of room for attatchments, and (my personal favorite) it will definetly intimidate the competition. Enjoy.
A-5, with the M82a1 shroud and G36 barrel with muzzle break. foregrip and magazine and stock from opsgear.
Awesome look, strong design and will put fear in your enemies
Gets heavy after a while w tank/loaded hopper.
I actually went on PBR to look at this after going on the ops gear web site. I actually wanted the G36 set up they have, but for the longest time it was out of stock. So i went with this one. I do have to say I am very happy with the purchase. This thing is great. I got the black colored one and it looks sooo clean when you have it set up right. Pretty much everyone who seen me with it either gave compliments or ask me if it was worth the money.
I say it is. but i know not everyone out there can just drop cash for a add on like this, but it is worth it. I mean if you plan on having and using your gun for a while might as well get something that will last forever.
And another thing your stock hopper will fit on it, so no need for an extension to allow it to fit right.
Ok the specs on this thing.
Lenght: its pretty long, it covers my stock so i dont even need to extend it.
Strenght: this thing is tuff! i dropped it a couple of times and it does get scratched but it keeps its form and hasnt bended or became out of form.
Weight: it gets heavy after a while I would suggest a remote line to help take some weight off it.
Style: Badass! it will definitly get looks when u go on the field. and it looks great!
Cost: could be cheaper. but after buying it i dont regret it. I do have to say on Ebay i saw it going for 89 dollars so for you guys who dont wanna spend the full price, go look there.
Hey the conclusion is if you have the cash, drop it on this.
All i have to say is if you want a milsim gun that scares the crap outta people get this kit. its awesome and accurate as can be. love the fact that you can put countless add ons onto this shroud. go buy one now if you want your gun to be all that it can be... i have had little kids ask me if it was an anti aircraft gun. it is a little heavy but if your into milsim you can suck it up and bear the weight.