Similiar to its big brother, the ultralight. These also feature an air-bleed and are coupled with our NDZ Micro Rail Ball-Loc system mount. These are light, purely functional and look great. The best part is they bleed down your marker when you back off the knob. Hey, no more shooting down your marker to remove the excess pressure and or breaking o-rings during bottle removal. .
-Built in air bleed, no more shooting down and no more broken o-rings when removing your tank
-Includes our removable Mico Rail
-Our combo weighs less than most On/ Off's. Only 71.6gr!!
-Custom milled body and knob for great looks and function
-Includes extra o-ring, pipe plug and mounting hardware
-Universal dovetails used on the Rail and On/Off
The New Designz EZ-Turn On/Off Micro-Rail Combo is newer, so it should be commonly available, both new and used.
Smart Parts Nerve
Aim Shock Regulator
48 ci 3000 psi alloy pure energy tank
Pro Touch Grips
This actually came with my nerve the way I bought it. Good thing I got it cus I was talking to some nerve owners that had the nerve stock with the stock on/off it came with. They said it was crap and wasn't that great. Good thing I had dis baby. Its very simple. Just screw it out and its off. And screw it in and its on!!! Very simple to understand and works great!
Russian legion timmy(stock for now)
evo2 wth Zed board
ND micro rail
68/4500 air america lp
I like 2% milk
Gas down with ease. Can be used/installed by moderately intelligent chimp
None so far
This micro rail combo is great. I like that you can gas down your marker instead of the cheesy 3/4 loosen then shoot down BS. I found once I made the switch over to air I never had the same problem I was having with unscrewing tanks(co2). Still it's nice to just be able to bleed the air out (must be easier on the o rings too). I wouldn't sweat it if you don't own one of these you're not going do die a horrible death or anything. On the other hand if you're getting a high end marker you'll probably need elbows,hoses and a bottomline kit so it you want something small/low profile, sharp lookin and practical then look no further.
get this if you want a low profile bottomline with bleed capabilities. If your marker/tank requires a drop or relocator don't get this.
10 out of 10
Last edited on Monday, April 10th, 2006 at 9:39 pm PST
red ndz s trigger
red dye stickie grips
ndz red on/off
evil pipe kit
Look at review
Look at review
Ok i bought this on/off last week. I had my friend put it on for me because there were no directions and he already had one. After he put it on i put my tank on. It was soo easy after having the ion duckbill. Also taking it off was easy too. But after a while playing with it, it got loose so i tried tightening the on/off onto the rail, I didnt know how the ball bearing worked so i was tightening it and I stripped the screw. So maybe a set of instructions would help, but otherwise this is a great peice. I highly recomend it
defiant 2 with 45/45 pmi tank hybrid tech feed neck evil pipe kit
Ez to turn, looks
A little pricy
I bought the new designez on/off for 35 bucks wich is an ok price. It kinda took me a little while to figure out how the little ball worked to hold it on the rail but that was just me. When i aired it up it had a leak from the plug but was fixed with some teflon tape. It was really easy to turn on and off and it looks really great.
I would highly recomened this on/off because it is eazy to turn on and off and looks very nice.
Odyssey O3M, evil detonator, evil pneumatics, aim rods, ND on/off asa, ND rail.
Halo - B
Pure Energy 68-3k tank
This is a perfect item for anybody who needs a new rail and an on/off asa. It is extremely light, and fits on any standard two hole gun. If you don't have a guage, it comes with a plug. You should lock-tite all of your fittings when screwing in macroline adapters to ensure an airtight fit. It is a dovetail design.
Psychoballistics Super Bolt
Bob Long Torpedo Regulator Chrome
32 Degreees Macro Line twin right elbow kit
Halo B w/ Rip Drive and Z-Board
32 Degrees Carbon Fiber Barrel 14"
PMI PureEnergy HPA Tank 88ci 4500psi
Smart Parts Bottle Armor
Teflon to further seal the threads
New Designz Micro Rail Combo
Slik Lite Cocking Kit
CCM STO NoPro Chrome Feedneck
Everything you can think of, it is a combo after all.
May leak read review
Well when i got this bad boy finally from ebay i couldn't wait, it was very easy to install right off the bat. I removed the packaging and screwed it right onto my cocker, it was light, lovely, affordable.
Now i went to attach the asa on/offand it was very simple. Just slide it onto the rail and tighten with an allen key. Then get your elbow and tighten in and connect your air source. Bing bang boom done.
Nope, it leaked for me, not a lot but i knew it had to be dealt with. So I pulled out the good ole paintballers ducktape (Teflon tape) and wrapped the elbow on the threads and reattached the elbow onto the rail on/off.
And well what do you know? no more leaks!
The great thing about this product is not only is it an on/off, but it also releases the left over air inside the gun, regs, macroline, hose, etc. without having to dry fire your gun.
I love it, greatest thing ever for a gun 100% recommend for all players who need something small, light, and does the job right.
10 out of 10
Last edited on Tuesday, December 20th, 2005 at 7:44 pm PST
04 shocktech timmy
empire reloader b
68/4500 pure energy tank
Colors, weight, ease of use, looks, choices
Price, leaked (sorta read review) shaky
When i bought this ndz on/off i put it on my shocktech timmy, looked really good. matched my marker well. attached all the hoses, and tank, gassed it up and had a leak coming from the plugged side and the side with the hose fitting. after de-gassing, i wrapped the plug screw and the fitting with teflon tape. and the leak was gone. after a little while (about an hour, hour and a half) the screws that hold it onto the trigger frame became a little shaky (nothing major. nothing that couldnt wait until after your day of play to tighten. not going to drop off, but it does get a bit annoying) but that is once again easily fixed. just tighten those 2 screws after each day and youre good to go.
At about $40 (i paid 36) its a pricy on/off asa. it works well, its a simple design that with a little bit of teflon tape (available at wal mart for under a dollar) works just about perfect. the mounting screws came loose a little for me, but it just needs retightening. its a good thing to get if degassing your gun by dry firing is breaking your orings. and the color choices will allow you to match whatever gun you have. with a tiny bit of work, you get a good piece of equiptment. ndz makes quality gear. just because it leaked at first and gets shaky it gets a
Mokal fokus 2
Dye mini gauge
WGP black magic drop forward
Viewloader revolution w/ x-board
Empire 4pc Barrel kit
Easy to turn
Since i was tired of having the stock duckbill on my gun on a huge drop forward that made my hopper stick up, i decided i was gonna get an on/off. I looked around and decided to get this. When i opened it up i was surprised how small it was. I spent about 10 mins getting all the hoses and fitting hooked up and sealed, i went out to shoot it. I slowly turned the pin in, heard a light hiss, cocked it and fired. It worked great. Then when i was done i unscrewed it, there was a small poof of air, and all the air was gone.
After playing yesterday, i noticed that the asa started coming loose.It wasn't a big problem, but enough to get annoying.After i got home i tried tightening it which didn't do anything.So i took it off and noticed that the part that holds the rail was pushed in, so that the bearing would only reach partway.I fixed this by putting a small piece of duct tape over it, and then sliding it back on.
Ok, so the rail is complete crap. It stripped very easily, and messed up my on/off a little bit.Just get the on/off part and get a nicer rail that will hold it.
The asa=good the rail= crappy
7 out of 10
Last edited on Wednesday, March 8th, 2006 at 5:20 pm PST