CCM and Sundragon Paintball have collaborated to bring Spyder MR Series owners a fantastic new upgrade for their MilSim markers. There will no longer be a need to worry about that cheap plastic feedneck cracking or literally breaking off in the middle of an important scenario or rec game. Introducing the new all aluminum MR series feedneck adapter.
This is a high grade aluminum adapter that fits directly to your Spyder MR1 or MR2 MilSim marker. Simply add any Impulse/Shocker/Ion threaded feedneck and you now have a solid foundation for your hopper that once clamped in, will not crack or move from the position you left it in initially. Add 2 or 3 drops of red Loctite to the threads of the feedneck, thread it into the adapter, hand tighten it slightly, let the Loctite cure for 24 hours and screw it directly back onto your MR1 or MR2. Add a quality CCM feedneck and you'll be able to run, jump, slide and trek through that thick brush without the worry of your hopper moving even a fraction of an inch after it has been tightened down. Any Impulse/Shocker/Ion feedneck will fit the threads of this adapter. The quality of the milling and thick matt black anodizing is simply fantastic folks. Not a surprise coming from CCM, a name trusted by paintball enthusiasts for quality products for years now. Available in matt black only for a perfect color match of your MR1 and MR2 markers.
All Aluminum Construction
Will Not Crack
Thick Matt Black Anodizing
Matching Matt Black Feednecks Available(sold separately)
Attaches Directly To The MR Series Bodies With Existing Screws
Vent Holes To Help Alleviate Dreaded Blowby
Accommodates Any Impulse, Shocker Or Ion Threaded Feedneck
Pulls Hopper Closer To The Body For Better Balance
Lowers Hopper Profile
Again, this adapter is only functional with the MR1 and MR2 MilSim markers. This is simply a must have for all Spyder MR Series marker owners!
The Chipley Custom Machine CCM MR1 & MR2 Feedneck Adapter is newer, so it should be commonly available, both new and used.
Spyder Mr1, Smart parts progressive 16", BSA Red Dot Sight, ccm mr feedneck adapter, core twistlock feedneck
Strong, Matches gun, Anodized
I ordered this adapter off of the spps website, got it in about a week and a half, and slapped it on my gun. It is a very sturdy feedneck that has had no visible flaws since i began using it. It has held my hopper in place and has not moved since i put it on the gun.
I would reccomend this to anyone who is tired of cheap plastic elbows. Great Product, CCM
Will NOT break. Holds the hopper as secure as if it was welded on.
None, Zero, Zip
While researching the MR2 I came across this feedneck adapter with clamping feedneck on Ebay. Seeing friends' experiences with stock Spyder elbows, I knew I had to have it. The marker came in 2 days before the CCM setup. I WAITED for the setup, not even wanting to shoot the marker w/o it. Boy, was I pleased!! It holds the hopper TIGHT, as well as lower than it would be w/the stock feedneck. Also matches the marker perfectly.
If you buy the Spyder MR series this adapter is a must!!
Zap Amp Generator
Spyder Delrin ACS Bolt
32 Degrees Carbon Fiber Barrel
VL Revy w/ X-Board
20oz PureEnergy CO2 tank
It Ain't PLASTIC!
Should Be STOCK on MR2.
Sorry about the Marker Setup. I don't wanna change it because of my review for that marker.
But I have a Spyder MR2 with the CCM Feedneck Adapter and an Empire Reloader B Hopper. The MR2 shoots a reported 25bps, so you should have a hopper that can keep up. But with a better and electronic hopper comes size and weight. And when you place that combination on the stock plastic offset-elbows that you get for the MR2, all you get is HeAdAcHe :(
That's why you MUST get this feedneck adapter if you have a MR2 or MR1!!!
It's a shame there aren't enough reviews on this piece, but it's a definite necessity!
Don't put up with having to replace broken plastic elbows that can't keep up with ur hopper.
Don't get caught running scenario and having ur plastic elbow rotate and ur hopper fall.
Don't feel like this upgrade is too expensive.
Make a small sacrifice and Get a CCM Feedneck Adapter for your MR1 or MR2.
Get it NOW!
MR2- BT barrel-Phanton hand guards-Trinity mag-M-16 carry handle-CCm feedneck-Mock silencer
Very sturdy. You'll never loose your hopper with this.
This is a great piece. Good workmanship. Holds your loader very securley. Installation took about 3 min. A little locktite on the feedneck threads let it set 24 hr. and your ready to go. Thanks SPPS for getting these to us. You will need to be careful threading the feedneck into the adapter for you can cross thread it if not careful.
This is a must have for any MR owner,and well worth the price you pay for it.
MR2 w/ Trinity Exp Chamber, and SPPS Custom Feed Neck and Adapter
ITS NOT PLASTIC! Very Quality Construction. Secure. Need I say More?
None, is a MUST HAVE ADDON!
The standard plastic 45* feed neck for me was never secure. Whenever i came to a quick stop the weight of the hopper would rotate the feed neck forward making for a blind spot and an off balance gun. This Metal Feed Neck threaded for metal adaptors is super secure and has really made a great difference.
This is a Must Have product, too bad spyder didn't come up with it on their own. THANKS SPPS!