Itís finally here!!! The air system youíve been waiting for. The CP Air combines everything youíve been looking for in an air system and puts it together in one ultra light package. Super High Flow Rate, Fast Recharge rate, Superior reliability and on top of everything itís rebuildable. All of this in a design that is nearly Ĺlb lighter than the competition. What more could you look for in an air system? The CP Air Combines it all and then backs it with the commitment to be at every PSP and NPPL to offer full factory support when you need it most. We took the same reliable technology that you have come to know and trust from the CP In-Line Regulator and created the ultimate bottle regulator.
The Custom Products CP Air is newer, so it should be commonly available, both new and used. Check out the Places to Buy links below for places to purchase it new.
Amazing small. Perfect for me. Fits right into my arms with ease. Go out and get this tank now. Kills any other tank out there. Any color reg you could imagine too. A little pricey but well worth it. Seriously, go out and buy this now while you still can. I imagine the 68/45 is still very nice aswell. If you're small or you rock a small gun, you're going to want this 48/45 tank.
03 cocker no part of the gun is stock besides the frame its the best and i got the palmers pump and up'd EMPIRE timmy /blue shocker with ccm rip frame,fully up's/lots of others
Size (atleast on 48 45)
Price 225-240 cha ching
Tank covers dont fit 2 well
Id been using a crossfire for a good amount of years and loved it worked great with my cp reg and i needed a small tank now more than ever and cp happens to make a tank so i go to the store and first thots are this thing is going to kill its so small and looks so cool. Its so light and small i cant believe you will not go wrong if you get this
Buy this you wont go wrong
P.S buy the 48 45 its so small
Clear PM6 CP trigger. halo b w/ vic and rip 48/45CP 16 inch UL
Light Tight and under control! super fast recharge and flow
So i just bought this tank from my local shop and it was awesome. i just unloaded with 2000 psi left in the tank and waited until i got shootdown and it didnt happen until the 500PSI mark whereas with my PMI tank it would begin at about 1000psi. the extra 3 cubic inches actually makes a difference too. i got about a half hopper extra shots out. not bad. but best of all is that its a half pund lighter than your average 45/45, and it really is. its also about an inch shorter. super low surface area and all that makes for a damn good tank.
If you can offord it, its well worth the money. beats PMI any day.
ICD B2k4, CP hp reg, AKA scm3 lp reg, CP 48/45 hp tank, Blue Forks T2 tray-less grip frame, lightened hammer, vapor valve, ccm no-pro, lucky un1tec kit, ccm carbon fiber barrel kit, blue led, several home mods, cant think of anything else.
Light weight (only 1.99 lb), great customer service, good looking, good feeling.
A little pricey, small leak around gauge when new, nothing major.
Picked up a 48/4500 hp at Cup, as well as a new rail and on/off asa to go with it. I have to say that I have been very pleased with it so far. I love the size and it is very light. The rail and no/off are wonderful as well.
I went and played with the tank the other day and it performed very well. I expect that the reg will break in and get better after few more fills but it was still very very good.
the only problem I have had is, the next day I noticed that the pressure in the tank had dropped from 4200psi to 3000psi, so I emailed cp and received a reply in about 30 minutes! the solution was to take off the gauge and put a little Teflon tape or blue loctite to seal it up. easy fix (the leak was only noticeable after 24 hours, that's how slow it was, but a little soapy water revealed it right away).
I decided to take the reg apart to see if i could adjust the position of the fill nipple. once apart the reg appears to use the exact same design as CP's other regs, anyway i was able to reposition the fill nipple straight up. now it wont be poking me in the wrist when i play.
i have an NXe 45 tank cover on it, and it is a little long, so i did a little sewing on it and now it fits very well. i played all day with it in sand and no sand got inside the tank cover. however if and when a company comes out with a cover specifically for this tank i will pick one up.
the graphics on the tank are very nice and show the great quality of the product, however they will always be covered by my cover so a bit of a waist imo, but i still want to take the cover off and look at it every once in a while so maybe not that big of a waist after all.
i would suggest that you find a store that has this tank and try it on your setup to make sure that it is not to small for you. i could see that it could easily be to small for someone with long arms, or anyone for that matter; but definitely give it a try i think you will be pleased, as i am.
this is a great tank from a company with a great reputation and great customer service. give it a try and i doubt you will be disappointed.
i will give it a 7. mostly because 10's are given out way to much on here and 5 is average. IMO this tank is above average, but price is a little high ($225 at cup) but customer service is top notch. definitely worth a look.
vVry light compared to some other systems
Good service if ever broken
None except that its a bit expensive compared to other
This is a great product and well made by CP
its holds PLENTY of air but is still extremely light
this is not the first carbon fiber tank i have used, and this is i think a tiny bit lighter than all the ones i have used
its a great round size so u can hold it close wen ur in the bunker real tight, unlike the AIr America ones
also consistency is great considering it is a completley new product for CP, not as good as a crossfire, but second best to Crossfire
looks r pretty nice too, the CP logo is along the whole thing
also u can get different colored regs, a nice touch
the only probs i encountered was finding a good tank cover that will fit very snugly, but i finally found that the eclipse covers fit very niecly on it, so prolem solved
and to some ppl it might be a tad expensive cuz its like 20-30 bucks more than most systems
Buy it, only problem is its a little expensive compared to others, and it might be hard to find a tank cover that will fit very snugly on it
smart parts ion
halo b v35
Durable strong holds air well
i used other tanks like the pmi and a 20oz co2 tank, but those tanks cant compare to this. The craftsmanship is second to none. The fills are easy because of the fill nipple the tank is full wrapped carbon, and it is just very durable. I played all day sunday with this tank and only had to fill 1 time. Plus my friend dropped it on concrete and there isnt even a blemish on it. Overall i think its the best tank i ever owned. Plus i got it for a good price. Cant beat 180 haha
i would recomend this tank to everyone. It holds its own to the rest, plus its cp! haha
10 out of 10
Last edited on Thursday, November 16th, 2006 at 7:37 pm PST