~Same NLGI thickness as DOW3
~PTFE particles form a slick barrier on metal parts to protect against wear
~Longer lasting up to 200%
~Improves consistency and fps by decreasing coefficient of friction
~Comes in a generous 2 oz. screw top container
The Lurker Paintball Lurker Lube is newer, so it should be commonly available.
-NDZ V2 bolt and spring kit
-JT 50/30 HPA tank
-Vlocity Jr. w/ Gangstar Chip
Wow, Lurker has outdone himself again with another great product. This lube is simply amazing. I shoot an Invert Mini and was using the stock Dow 33 lube, after I lubed up with Lurker and played a game I felt like burning the Dow 33 container. There is no comparison between the two. I got 284-287-285-286-287 at the chrono using this lube, that is only a +/-3, simply astonishing. Lurker gives you a very generous container of lube for only 8$, ironically the cheapest lube around is the best lube! All in all a great lube that increases performance by a substantial ammount, just apply a small layer and your good to go!
I would HIGHLY recomend this product. Great lube for cheap, you can't beat it.
Very thick, but when applied it gets thin and slick
Stays in the same place
Lurker Paintball has made a great lube. When I first ordered it I was using Dow 33, but it is nothing compared to this stuff. On my DM4 I was able to bring Dwell from 18 to 13 with no drop off what so ever, and I have lowered my LPR, and couldn't be happier. The smell of pears is great and may get me high ;)
Lurker is a great guy and has something great out!!
The lube is the BEST I have used so far, and I don't think I'm changing.
hybrid bolt guide
uni mount asa
prolite barrel (proto back ul tip)
05 empire timmy
cp direct mount on/off
twist lock feedneck
hybrid high flow hose kit
Stays where u put it
Lasts a long time
I got some of this with the eigenram i bought and this stuff works great. i put a realativly light coating on the ram and slid it in. after about 2 cases, give or take a couple hundred, it finally started to wear off. it doesnt take all that much to lube it either. i realize that the ram isnt all that big but with others u would have to put a little more on.
Overall a very good lube. Although its a little hard to find, its a good choice if u should happen to come across some
Decreases operating pressure (lowers Dwell/HPR or LPR pressure)
Smells like Pears : )
Not really any...
I have used this lube in all types of guns (spools, poppit style, etc.) and this lube is the best for pretty much any application.
I'll copy and paste what it did to my ION from PbNation:
Hey ION owners,
Now, i know lurker from KOT, and thats how i found out about this lube. So, i was in need of lube, and i said, "Hell, why not give this stuff a chance?". Plus, it was only 8 BUCKS!!! ZOMG!! WHAT A DEALZ!? So i bought some, and here is my review of this lube:
I opened the package and i saw it came in a nice screw top jar. Very nice compared to other people selling their lube in camera film containers. I went into my room and sat down with my ion. I unscrewed the lid and saw it was almost clear. I unscrewed my end cap (stage 5 ftw!) and started to lube my bolt...i then saw how much better this stuff was then Dow 33. It was very thick. I only used very little to lube my bolt, end cap, firing can, inside of stage 5, SFT, and any other o-rings i could find (such as all the o-rings in my freak back). I didn't have air at the time, but i pushed my bolt forward, and it slid like butter.
At the feild:
I went to work, and i filled my tank. I then got a bag of paint and went outside. I poured some paint in the hopper and shot about 1 and 1/2 hopper i noticed it started to get hot (FPS wise mind you...). I went inside and grabbed the Hyper2 allen key and a phillips screwdriver. I sat down on the couch outside and begain to see what it can do. I 0'd out my dwell, and turned the reg all the way in (Dwell @ 24, reg at 3.5 turns out at 110 PSI). Now, before the Lurker lube, i was able to shoot my gun at 22 w/o drop off (i raised it 2 more, just incase ) So, i turned my dwell up to 12, the normal setting that QEV's are at. I then turned my reg out around 2.5-3 turns out. I shot a couple balls, and it still was hot (it was ~315-320). I then zero'd my dwell out again. This time i raised it to 4. It shot. W/ drop off that is. Now, i raised it to 5, and it had no drop off...i was like . i turned it up to 6 just to make sure there wasn't drop off later. My ION was running at 6 dwell...omfg. So, i went to the chrono, and it was ~290-292. My feild is 285 max. Turned my reg in to ~2 and it was at 285. It was a beautiful day.
After a day of play:
I went home, and sat on my bed, i opened up my ION (stage 5 ftw AGAIN!) just to see what the lube was doing. It was still on there! I was amazed. Normally, dow 33 turns into black stuff (shouldn't call it lube, cause...its not), but this stuff, was still on my bolt, everything. The tail, stem, shaft, and a little tiny bit on the head. I was sooo amazed.
I have tried this stuff out on matrixes, and it worked the same way. Lowered the LPR and HPR, and dwell a bit. This lube is FTW for ION'S!
TLDR; Lurker lube = secks.
Link to lurkers site- http://www.lurkerpaintball.com/
PS- Watch your lube if you get it. 1/2 of it is gone allready from people stealing it from me.
Thanks for reading and hope that you atleast break down and buy this 8 dollar 2 oz's of lube!
That was what it did for my ION. It was running at 6 dwell. Lurker lube has increased my consistancy to my ego about +/- 3.
I have NEVER gotten fsdo with this lube. The only way you could possibly get it, is from putting WAAAYYYY too much of this stuff on.
I really really enjoy this lube and hoping to buy some in bulk soon so it can sit in my workshop.
8 bucks...get it. Srsly, the best lube on the market today.
Coats the metal parts with Teflon over time.
Great in cold weather (<40*)
initially tested this product against Hater Sauce V.1 There wasn't really a noticeable difference until I hit my 4th case without relubing. Hater Sauce started seeing some poorer numbers than when the gun was first lubed. Lurker Lube was still going strong with 293,294,294,295,294,289,294,294,294 after a little more than 4 cases! Not real sure what the other guy is talking about, I haven't had FSDO unless it was below freezing and the gun had been sitting there 15 or 20 min. Even then I just turned the air on then off (Hybrid Push button) and it was fine.
Consistent lube that really outpaces the other lubes.
10 out of 10
Last edited on Wednesday, January 3rd, 2007 at 10:29 am PST
The accuracy of this review is disputed. Please see discussion on the comments page.
Period of Product Use:
Similar Products Used:
Smart Parts Ion
Stage 5 body
Stays where you put it
Can give you bad FSDO
So i was having some troubles with my Ion. So i thought maybe i would try a different lube (i had been using slick honey). So i ordered some of this. When i put it on i put a thick layer on, bad idea. I then had to re-lube it because i was having crazy drop off. This time i cleaned everything from firing can to bolt, and then my breech. I applied a thin layer and sadly to say i still had fsdo. Not as badly as i had when i put the thick layer, but it was still pretty bad. This is not all it is cracked up to be.
I would recommend getting this lube if first shot drop-off is your friend.
I later got hater sauce, hater sauce > Lurker Lube
Dow 33- works good, i used it alot in the past, nice and thick pretty slick too
dye lube- never really a big fan, a fair lube for my dm4
slick honey- nice and slick not as thick so it doesnt last as long
hater sauce- smell nasty, but pretty good slick lube
top hat mod
16 in ul
Smoke halo b with dice mod
Black Invert mini
16 in ultralight
smells like pears
Clear so its hard to see were it is
slick but not the slickest
Ok i got a container of this lube from one of my friends because i was having bolt stick in my dm4, shot about a case and a half with no bolt stick or shootdown with 4 turns out on lpr,so i lowerd it to 2 turns out and had a little fsdo and alittle drop off when i was ramping, so i turn it up a half turn and havent had any problems, so after about 3 cases i took the bolt apart to relube(like i usually did with the dye lube), and it still had a good amout of lube left, i still relube after every few cases out of habit, but i dont really have to
If you need a lube i suggest this lube, and its a decent price and will last a long time, i give this product a 9 because it is pretty good but nothing is perfect
9 out of 10
Last edited on Thursday, January 11th, 2007 at 12:56 pm PST