The BT TM-7 utilizes Mini Technology to inflict maximum force from a marker of minimal size. Don't be fooled by the size of the TM-7's exterior; it can hang with the big boys and is by no means a lightweight. Once you hold one and pull the trigger, you won't want to put it down. Its lightweight, yet durable construction is perfect for close quarters or long-range combat. This is the marker that just may have people rethink the way they looked at Mil-Sim paintball markers.
Mini Technology Inside
Shift-On-The-Fly, 4-Position Mode Switch
Multiple, Extensive Firing Modes Including Semi/Burst/Full-Auto
Multiple Picatinny Rails Allow For Extra Accessories
Adjustable, Multi-Position Stock
Collapsible/Adjustable Front Grip
Low Pressure Operation
No External Hoses; Internal Airline Operation
Additional Modes: NPPL/PSP/NXL/Millennium
Universal Mini Style Barrel Threads
The BT Paintball Design TM-7 is newer, so it should be commonly available, both new and used. Check out the Places to Buy links below for places to purchase it new.
Upgraded RIS forgrip, large sight picture red dot sight for left side rail, your barrell of choice.
Lightweight, OUTSTANDING BATTERY CHANGE!!, Gas efficient, Fast, Integral stock and rails, Selector switch
No ASA on/off/purge, too-small sling points, crappy stock sights
This gun is a steal at 400 dollars. It performs as well as all mid and some high end tourney guns, shaves off most of the functions (like game timer LCDs) that have no use in the woods, looks super-sweet without useless milsim mod crap (like a functionless magazine well . . . COUGHX7COUGH) and is lighter than any woodsball gun. Now, you could get an X7 for about a hundred less, pay 50 for a stock and 100 for an etrigger and still be stuck with a paint-blending cyclone feed and 5 extra pounds, or you could take this gun out of the box and hit 20 bps right away.
The ballistic nylon feels flimsy to the touch but holds up fairly well. The battery change makes my pee pee do funny things. The rate of fire is outstanding. It comes with a great manual and toolkit.
Be careful what barrell you use for it, not all fit the shroud. My J&J is a tight fit, but it works. The trigger pull could be smoother. Honestly, I would be fine with the extra weight of a metal trigger if it felt a little more put together. The stock will just barely accomadate a 68/4500 without a cover, but will not extend past the length of it, rendering it useless if you don't run a remote line. Standard mil-spec slings (the kind that mount on CAR stocks and such,) will not fit the miniscule sling loops on this gun. Try a small D-ring or something. And BREAK IT IN!!! Mine took about a case and a half of paint.
I love this gun! It's weaknesses are minor, and its innovations should be taken note of by other manufacturers. If you don't like the price, think what an X7 would cost for the same level of performance. Good Job, BT!
The ball detent, and on/off switch failed during game play.
There are some who are disputing the problem with the on/off switch. The on/off switch on my TM-7 Broke off during the first day I took the marker to the field. I also experienced both ball detents coming off the weapon at some point during the course of play, and they are lost to the four winds at this point. Even with my not being able to turn the marker off and the ball detents missing it was able to fire just fine, which I guess is a good thing, but DAMN!! There is a problem here that BT need to address. In my case the switch on the circuit board itself dettached and it appears that the polymor material the ball detents are made of failed and broke apart. I will be contacting BT customer service and taking the marker back to the paintball store I purchased it from. As far as play, with the exception of the failures i've indicated the marker worked just fine.
UPDATE: The PB store I bought the TM7 from replaced it without hesitation. I have been out approximately 10 times since then and the new TM7 marker has worked flawlessly.
I still like this marker and understanding that it is a first run. I can live with the growning pains as long as BT will effect the repairs for the deficiencies that are being discovered. This marker probably could benefit from more field testing and modification by BT.
UPDATE: seems like my original may have been a fluke have not had any problems with the new marker and would recommend it to anyone.
10 out of 10
Last edited on Thursday, November 20th, 2008 at 1:40 pm PST
Ok, i hate this gun.
At first, i was crazy about it, but eventually i ended up disliking it. I got the gun for my bday which was 2 months ago. I thought it looked cool and that it was fast. I played with it for like a month and then it started messing up. One day, I was at the paintball park, and i set it on burst 3. It didn't work. It started shooting on full auto and it wouldnt stop, so i had to put it on safety to get it to stop. Then, like a week later, I let my friend play with it for a day and he tripped and the grip broke--now I know not to buy guns made out of plastic. Also, he chopped some balls, so i had to take apart the gun and clean it, which took me like 2 freaking hours, which resulted in an air leak.
I do not recommend this gun. It is made out of cheap plastic and its gonna mess up sooner or later.
Don't get it. It's a waste of money. You could get a much better gun for the price of a tm7. I wish I had waited and gotten the new pmr.
3 out of 10
Last edited on Saturday, December 27th, 2008 at 10:59 am PST
This is my first electronic marker. It was a toss-up between the Invert Mini and this. I chose this over the Mini because it is far more durable over the Mini. Plus if you are anal like me on the condition of my markers, I would have heartburn if the nice finish on a Mini gets all scratched up. If the black plastic gets all dirty and scratched up like my A-5, it just adds character.
I got mine off of eBay. A lady won it at a raffle and had no use for it. When I first got it I noticed how light it was. Around 2.5 lbs without hopper and tank, this was just as light as the Mini but with a collapable stock. The shape is dead on with an MP-7. This gun get my vote for most accurate looking Milsim marker.
Programing was easy. I set my gun to 15 bps with 3 round bursts since I think 20bps and 6 round burst default settings were a bit excessive in a scenario game. The instructions are pretty thorough.
I put about 2500 round though the gun the first time though. I used Heat balls. Which is mid range. I only had two breaks post chamber towards the end of the barrel. No breaks in the chamber. After a day of playing the batteries were drained about halfway and I see another 1500 rounds going through the gun before The battery is done. As for air, my 45ci tank will empty in about 600 shots (4 games worth).
I did notice three very annoying design flaws however. First, the plastic stock and body tends to flex if you mount a tank on the gun but miliarty grade plastic is durable can can take punishment. I just stuck a remote on the gun. Although I lost the manuverbility of the tank being on the gun, the whole thing weighs about 4 lbs with just a loaded hopper.
Second, the stock is a great design for the real MP7 but it does little good for paintball. Like all inline stocks, the mask gets in the way. I would much prefer the butt plate to be where the tank is.
Lastly, the fire setting switch is horrible. It is too easy wo go from one setting to another. There were several firefights that I got into that resulted in my hand pushed the fire setting to safe.
Overall the TM-7 is a great Milsim marker. It's lightweight, durable and is great for out of the box play. Hopefully BT will come out with a fix for the flaws I have listed in the future.
Overall this is a great milsim marker for the scenario player. In fact, it is one of the better markers out there. Straight out of the box, I doubt if there could be more satisfaction in firing a milsim- low kick which means placing the paint on your target and better grouping. It's rate of fire via the factory settings was impressive and low and behold this marker is very stingy with air.
I the past I have used primarily A5's and SP8's- both of which hog air. With basic modifications, the best I could ever get was around 1200 rounds with a 45/68. The TM 7 allows you to shoot close to 2100 rounds with the same bottle. This is a significant difference.
The stock barrel is not bad- but not great either. I would invest in an upgrade here, but for the average player, this barrel is sufficient for scenario play. The trigger assembly feels a bit too "plastic" and lethargic. There is no snap to it at all and I can see this being a problem in months to come.
Teardown is a bit intimidating your first time in. A lot of parts to disassemble for a complete teardown and a bit overly complicated. I understand that the performance is driven by the design intent- and the intent was never to perform a complete teardown. I will say however that there are small features that really make this marker a pleasure to own. Changing the battery can be done in seconds- even with gloves on.
It's been a long time since I've picked up a marker out of the box, fired it, and grinned. This is what the TM 7 does for the psyche. Are there features that need improvement? What marker doesn't. Lightwieght, good feel, easy on air, reasonably accurate out of the box, switch selection on the fly, field battery change with ease- what more can you ask for? Again, probably the best "out of the box" milsim marker on the market today.
Not gonna spend alot of time on this, because I haven't got to use the gun for very long. My friend (and I)bought the gun at the MI monster Game, and got to use it for a bit. It needed tech before he could use it as he tried to fiddle with the trigger play. According to the tech, the adjustment is there for you to leave alone. (It's only to have the appearance of being adjusted?) About an hour into it's use, the screen printed mode selection indicators were starting to wear off.
The marker was turned on and dry shot a few times to show off to interested individuals. Other than that, is sat in its case until last weekend. We took it out for some backyard ball and the power button broke. Still waiting to hear back from BT Customer Service.
This is the third instance that I know of where the power button broke on the T-M7. One of which I was told that when C.S. was contacted for repair, they said it wasn't covered because it is "normal wear and tear". Also, of every T-M7 that I heard of, the mode selection wears off.
Also, the selector switch seems fairly fragile, and I'm witing for it to snap off in the middle of a fire fight.
From what I've read/heard, these issues were all brought up during testing before major production, and none of them were adressed obviously. I would like to be proven wrong, because it seems fairly irresponsible that a company wouldn't adress important issues of things known to easily malfunction.
but at least it looks pretty and shoots fast (as long as you can get it to turn on)
hopefully these issues will be adressed on future production runs, and the customers are all taken care of with this miserable first batch of what could be a very slick milsim marker.
68/4500 Carbon Fiber Tank
Vlocity Select Force
Compact, Intelligent Design
Good price vs. X7-E
Front grip is slightly loose, but not too bad.
So, I have been "playing" for 15 years or so, but very very sporadically. I have recently gotten the bug and this time I had some money. Dangerous combination.
I was torn between a decent electronic "Speedball/Airball Marker" and sharp looking Mil-Sim marker. I mostly play woodsball, but I want to be able to operate in CQB efficiently, as well as be able to play speedball, and hauling around a replica main battle rifle is not the best plan for these situations, obviously.
When I expressed this dilemma to the boys over at the Bing Shop, their response was "why not just get one marker for both?".
Now, I am a "fan" of sub-machine guns, but I am partial to main battle rifles. I guess that is why I really didn't pay much attention previously to the marker Beau pulled off the wall and handed to me. TM-7 huh?
I simply cannot say enough good things about this marker. Clearly you can't give a full review until you play with a marker for some time, but you can definitely tell a winner just by hefting it and putting it through its' paces.
So much has changed since I played heavily 12 years ago, and the eye system in this marker is amazing. I got it all set up and ready to go, went out on the deck and tried to fire it... nothing. What? I mess around, thinking it is something stupid. It was. Feed wasn't connected properly. Well, any other gun I have ever owned would have shot anyway. Damn nice, even if it won't 100% stop the chop, I will take everything I can get.
This thing rips a rope of paint out so fast that it looks like the balls are touching. I fired it at a target about 50 feet away, and when braced, it tagged an area about 4 inches across. Dead. On.
The buttstock is a definite selling point, light but sturding, quite adjustable. As mentioned by a previous reviewer, the battery port is excellent both in location and operation.
Attention to Detail. Whoever designed this marker did so with love and pride from the beginning to the end.
Anyone considering getting a new marker, put this guy at the top of your list.
Power button (see body)
Uses PaintballSolutions for customer service
The TM7 is a fast, light marker that introduces BT to the realm of high end milsim markers. I liked that the marker came in a package with an Empire barrel sock, some grease, spare parts, and all the allen wrenches needed. Really, the only things needed not included were a 9volt, a loader, and your HPA tank.
The stock barrel is .691 bore and 9 inches long. It performs well for a stock barrel, but upgrading to another barrel is a logical upgrade for this marker.
The stock is adjustable, and in the field I have found it to be quite stable.
The selector switch allows you to switch between semi, PSP ramping, and NXL full auto. There is an easily accessible tournament lock in the event that your field requires it.
The only weakness I have found with this marker is the push button for power. It was not adequately connected to the circuit board, and as a result, was damaged after a few days of play. I believe this is a freak chance problem that happened with the first-generation TM7s only (or perhaps only my individual marker), and BT's customer service will honor their warranty to fix this flaw.
I got my TM7 back in a week, and it's back to normal operation.
FOLLOW UP REPORT - February 2009 -- My TM7 has started acting up in this month. The issue appears to be a problem with the hall effect sensor technology. Symptoms are bursts of fire coming from semi-auto and the marker powering off arbitrarily on some trigger pulls (possibly a power spike?)
At first I suspected it was a board issue. I called up paintball solutions (BT's tech support) and told them about it. Their answer? Do a factory reset. Seriously, if I was able to tell you what the issue was, you should know I was smart enough to try that just to be on the safe side.
While they did send me a new board free of charge
I plan to call BT directly this week and skip the middleman paintballsolutions, a company who simply is of no use without a real argument (I had to fight for the board I got).
It really is too bad -- as a whole, the design could have been sound. This one problem and how BT will handle it will forever decide my opinion of this marker.
Lowering the overall number for now and we'll see in the future.
FOLLOW UP - November 2009.
Paintball Problems (I mean Paintball Solutions) wound up replacing the solenoid. It's possible it was a factory defect instead of a design flaw.
Ran with it this whole season without issues.
I could see BT being the end of the blowback markers, if they address the issues in the technology first.
Really, when the TM7 works, it's incredible. When it doesn't, it's a pain and the customer service of Paintball Solutions may induce profanity.
8 out of 10
Last edited on Wednesday, November 18th, 2009 at 2:10 pm PST
A little hard to put on the feed elbow. Front grip wobbles.
First Impressions: When I arrived home my brother informed me that the mail order I had placed for the TM-7 had come in. He also mentioned though that something was wrong with the order. I thought ok fine I will check it out. I saw that 2 boxes had arrived. I picked though the first smaller box which contained a 12Ē barrel and an 18Ē barrel. Ok that seems ok, so I moved onto the larger box. It was about the size of a small suitcase. I bent and braced to lift the box. I gave a heave and almost fell on my back. Oh crap I thought. The box was so light that it felt empty. I quickly opened it up and found an amazingly well constructed box with the BT label inside. I opened the box and was amazed at the detail put into every aspect of packaging. I must admit that I have been a fan of Tippmann for a long time but the moment I opened this box my eyes were opened to a new woods ball company that may well have surpassed my old favourite. It turned out that the mix up was due to the 18Ē having the wrong threading.
Packaging and Related: Sounds odd but yes very impressive. The Box the gun comes in is made to look almost like an ammo case. Once itís opened it contains foam cut to the shape of the gun just like a real gun carrying case has. The Manuel is 20 pages and is a large size with many useful pictures. The tools come in a small plastic case with dividers in it similar to a fishing box.
TM-7: The gun is very light and the Stock is easy to adjust. The feed neck is a bit tricky to get on. You have to slide the elbow onto the narrower section of rail on the front end of the gun and then slide the elbow down and back while pushing in a small button on the elbow which has a metal clamp to hold the elbow in place. TM-7 has symbols on the side of the gun to indicate firing mode. When the gun is in safety the led on the side is red and when the gun is on a firing mode the led is green. Very Light and compact. The firing modes are easy to adjust using the selector on the side.
I shot 4 hoppers of various paint types I had lying in pods around the house through the gun using both the stock barrel and a special ops 12Ē carbon fibre barrel and preferred the carbon barrel because it was lighter. The gun shot through a hopper faster than I could imagine on the 20bps setting. It was a breeze to fire and lots of fun. I would say that this gun seems very similar to the SP8 except for ease of selecting fire modes and the huge weight difference.
It was a breeze to fire and lots of fun. I would say that this gun seems very similar to the SP8 except for ease of selecting fire modes and the huge weight difference. I rate this gun a 10 because I have not found any issues that would take the rating down. Once I play a game with the gun and see how it functions in the heat of battle, and if the performance is not what I expected I will edit the review.
Flasc Double threaded Barrel with Fake screw on Suppressor and Screw on Apex tip backup
Flasc Paintball Rip Clip Adapter
BT Rip Clip
Delta furniture and mag
Quick Disconnect sling mount on rear of furniture
Palmers Male Regulator screwed into ASA
TechT MRT Bolt and Spring kit
Thatís all I tested for barrels so far, I will add more when I test more out.
The TM-7 also comes with the best marker toolkit I have ever seen, rather then tiny allan keys it h as nice long easy to use allan keys, a back plate for your stock if you wish to remove it (sp shoulda done this with the sp1) it also has a duracel battery, spare screws, lots of orings detents spring and even a very cool little container of grease! fantastic, and not to mention a cool carry case for all of this stuff instead of the standard plastic baggie
The marker itself is constructed very well. it looks great, I love the no airlines and the battery door is just fantastic, no wires to deal with and changes in seconds, literally! I love it!
The side rails are removable which is a very nice feature; however I will be keeping mine on. No plans for them yet but I like them where they are.
the feed neck goes on a bit different then prior BT markers, there is a recess in the rails on top and it clips in from there, if you try and put it on from the front you will be fighting all day long with it. I cant wait to get my Rip Clip on it but alas.. I dont yet have the adapter... Very sad as this marker will look awesome with a rip clip on the side with a LP X7 hopper.
Selector switch, I really like it so far, I dont know what its wear and tear will be like, it doesnít feel like it will be super strong for years to come so I can only wait and see. However I am not too worried because I can see some company making an aluminum upgrade part for it in the near future.
Air, recommended is HPA only at LP, but HP out is fine as well, I have a 56CI 4500 Empire tank with lp kit and stock HP out, I think I will leave it on HP out because I want to try it with my PPS ASA reg I made for my remote (instead of screwing my remote tip into the ASA I screw in my male Stab and it has a remote input on the side, when I finally get my tank 100% full I want to test to see if the double reg setup helps consistency at all, ill post here when I test both ways. (With extra reg and just LP tank)
I like the no hoses as I have stated before, the stock asa. reg looks awesome, I like the bleed underneath, and it seems BT took prior starvation issues seriously as there are 4 (four) input holes in the asa all near the center so no blockage to speak of.
Runs at 200 PSI
Grips - rear grip I like, nothing overly special about it, just donít dislike it, feels good. the front grip is more interesting, I love the foldable design with the button to move it, however its a bit wobbly, I am sure I can fix it with some time and mods when I get round to it.*update, while I did like teh grips I now run a BT Delta mag instead, looks much nicer, but for pure performance the grips are still awesome and do the job well.
Accuracy I wonít say much on because its based more on your barrel then anything and I use a PPS brass, youíd get more info reading a review of the barrel you wish to use. however due to low kick this marker will help keep accuracy on target a bit better then a standard bt, especially if you use the stock.. The one thing you do need to do to keep good accuracy is use good paint!! if you use crap paint and it breaks in the hopper or feedneck and paint gets in the marker you will need to take it apart to properly clean it out. and like any marker a dirty marker = bad performance.
Anti Chop, this marker includes eyes, not something Im used to being used to markers from Tippmann and BT, will be a nice change in the woods I think!
*update* I absolutly love the eyes, after about a year of use I thought id say a few works about them while I make my update, they work flawlessly, and they are very easy to turn off if needed (dry fire, testing etc etc) very easy to use, work great, not a single issue yet with them*
Disassembly is pretty straight forward, once you get the clamshells off you can see that the serial number is also on the inside of the marker which is cool, I did find it weird that it was only found on the reg on the outside of the marker. Also remember, longer screws on bottom, this goes with the body AND the grip frame when putting the rubber sides back on the grip. Its defiantly not a bt-4 inside! It will take some getting used to but it doesnít appear to be overly complicated, just different. also on a side note, donít forget to put the battery door in before you reassemble, if you did however forget (like me) you can get it back in by loosening the rear bolts a bit, so its a bit of a save
when you first get the marker it will sound rather loud (not as loud as a normal bt or tippmann mind you) after you put about a case or 2 of paint through it the marker will "break in" I suggest cleaning and relubing it after your first case and you will find a great increase to efficency and noise, it will get to be an extremily quiet marker once you start using it, so dont be dissapointed if it sounds loud the first time out!
*update* Efficency: I measured my efficency a bit better today then prior guestimates so I wanted to make an update, I today fired 1040 rounds (200 in hopper and 6 full pods) and I only used 2000 PSI on a 70/4500. meaning if I kept going I would have had approx 2300 rounds on a single tank! amazing I was iimpressed, I was hoping for 1700 or so! I also understand as I break it in more it will get a bit more efficent as well!
cost comparison: only a few bucks more then the Delta Elite or the X-7 with E-grip, well worth the extra $20-$50 I would say, this is an awesome marker and I recommend it to pretty much anyone.
TechT Bolt and spring have allowed me to lower my pressure to about 150 PSI with great results. I havent really noticed much difference in performance, only in lower pressures which allowed me to reduce volume, but I still find best air efficency is still at about 190 PSI, I have sacraficed air efficency for lower volume but I still get fantastic efficency, I use a 110 CI 4500 PSI Tank now with Myth Reg, (anything over 48 on a tm7 I HIGHLY suggest using a remote line) The TM-7 is just AWESOME with the Rip Clip, I played with a Pinokie last week to try it out and after using the rip clip for a few months just nothing compares. Ive had the marker for almost a year now and it hasent let me down at all, works flawlessly, fires great awesome performance and efficency and loads of upgrades are avaiable for it! I just dont have enough good things to say about this marker, its just fantastic! Awesome job to the guys over at BT!!
TechT Bolt and spring have
Great marker by BT, This is what Tippmann should have done with the X7, but BT did it first! I see this marker changing a lot of things for BT and for woodsball in general, the delta and delta elite were great changes as it was but the TM7 will be much bigger Iím thinking. Itís a great marker, well worth the cost.
10 out of 10
Last edited on Sunday, May 24th, 2009 at 1:20 am PST