* Motor sensing with anti-pop-corning technology
* High torque Magna Drive™ motor for reliable, consistent feeding
* Reversing ramp - lifts balls up and out of the drive to prevent jams and broken paint
* Advanced drive system with preload drive carrier extension - aids consistency and auto clears jams
* Low friction fully ball raced Delrin drive carrier and extension
* Magnetic force loading for fast, consistent feed – no spring to pre wind
* Integrated Empire Freeway™ Antijam and anti-blowback venting
* Sound Activation and/or RF (radio frequency) Activation with 6 speed settings
* Operates on four AA's or two 9-volt (requires adaptor) batteries (batteries and adaptor not included)
*Tool less disassembly
*Different fronts offering 200 and 280 ball capacity.
*Stock Prophecy will have a 240 front looking very similar to a Reloader b loader.
*Fully integrated lid with adjusted magnetic lid, speed feed in the works.
*Back plate has room for board upgrades in the future.
*Everything can be stripped down
More info at http://www.empirepaintball.com/zn/empire_prophecy2.php
The Empire Prophecy is newer, so it should be commonly available, both new and used. Check out the Places to Buy links below for places to purchase it new.
Good on batteries
Tool less dissasembly
Rf system really bad
This hopper was great for the first year of ownership. Worked flawless but after about thirteen months it started developing intermittant software issues that I could only fix by unplugging the batteries. The hopper has only seen about 15 cases
Rf system is horrible if automatically feeds every 10-15 seconds weather or no you have a trigger pull
On a good note I love the design, low profile, sleek, strong flexible plastic, two tone color scheme and tool less dissasembly.
After my halo b working flawless for 100s of cases and probably about 5 years I would have expected more from the prophecy. It seems lIke a disposable hopper. No factory support for replacment parts due to them discontinuing the product. Very short production run. This product will make me think twice about empire products
A1 Fly with Empire Prophecy Loader. Low pressure tank and Deadly wind Fibur barrel with Freak inserts
Fast, communicates well with the Angel.
Easy to clean
doesnt stick out much
Poorly designed (see review)
Hopper loads fast and keeps up with the A1 Fly on unlimited semi (30+bps)
I bought it just before the off season. Started playing again this summer and on the 5th game i was hit, when i was walking off the field the hopper got hit by a stray ball on the clip that releases the front. The clip broke and now the front wont stay on. 40 bucks to fix it.
Even though the hopper is cheaper then a Dye loader just go wit the Dye. No external parts that can break so easy.
-Easy to program
-No tool field stripping
Not many besides maybe a wider than average feedneck
I bought my Empire Prophecy about 3 months ago. Suprisingly it only cost $110 at my local shop. The Prophecy is extremely light and has is very easy to program. Everything on this loader is customizable, but the stock setup is not bad at all. I love the 240 cone that comes stock, as its nice to have the extra paint, and because of how light the Prophecy is, it doesnt weight much more than a halo fully loaded at 170-190. The Prochecy also offers different color side panels, and chanching the lids is sooo easy, I love it. Honestly for the price $110-$130 you can not beat this loader.
I would recommend this loader to anyone looking for a high performance hopper, who doesn't want to spent $170 on a Dye Rotor.
Price: $100 ANSgear.com
Programmablity: 4 features
Speed: 35 bps
Small rip drive
Alright after using the prophecy for about 3 months I think I can give it a fair review. I took Tech pb Mike's advice about deciding between the rotor and the prophecy and the pinokio. So I am in the process of buying a prophecy, testing it out, selling it, buying a rotor testing it out, selling it, and then buying the one that I like the best. Anyway, I am really impressed with the prophecy. It is cheaper then the rotor by $60. It also packs a ton programmable features: ball stack pressure, speed, sound sensivity, and magnetic strength. It feeds at 35 bps and is slightly lighter than the rotor. It operates on 4, AA batteries and must have very good efficency because I still have not had to change them even after 3 months. The only thing that I can think of that is bad about it is the size of the rip drive wheel. It is smaller than a Halo's and is rather hard to turn. (I haven't had to use it in combat yet though) I think the prophecy is definetly the best hopper for the money!!!
In my opinion it is the best hopper for the money!!
2010 Proto SLG
Ninja 48 ci carbon fiber hpa tank
Empire Prophecy LTD
2 piece Proto barrel
Spyder E99 avant
EVlution 2 hopper
Pure Energy hpa 3000 psi
SmartParts Teardrop 14 inch barrel
or Smartparts Progressive 16 inch Teardrop barrel
not to expensive cough dye rotor....
Upgrade costs a lot
besides that nothing
I have tested one of these hoppers on an invert mini on ramping and it could keep up to the speed very easily. I also like that this hopper can compete with the Dye Rotor and still be cheaper. this hopper can feed very fast and is powered by an empire magna drive. I prefer this for my proto because it can keep up very well. it also holds a lot more than a halo.for any speedballer or just someone who wants to shoot fast, it will get the job done.
I would reccomend this to any person who has a gun that can shoot fast and wants to shoot fast. i give the Prophecy a 9 out of 10.
9 out of 10
Last edited on Saturday, August 14th, 2010 at 4:12 pm PST
The strengths and weaknesses above pretty well say it all. This product has met my expectations in every way, but I recently ran into a small problem. I have experienced some jamming with Draxxus paint for some reason. and that is a total bummer, because I like Draxxus. I did see another review above that offers a small tip to solve this problem, and I use lots of different kinds of paint, so it is no big deal. This thing is strong, fast, and easy to use. another nice feature is the huge opening. I can almost fit my whole hand in there, and I know some guys who actually CAN put their entire hand in the opening. I have yet to spill a single ball when loading. Another thing I was worried about was programming, but it was very simple, and you can adjust everything you would possibly want to adjust on this hopper. The low profile and large capacity are nice too. I dump a locklid in this thing and they ALL FIT! Finally!!!
Again, my only complaint was the occasional jamming with one specific kind of paint, so all in all I cant complain, because this hopper is my favorite so far, and the one minescule problem I have found is an easy fix. I recommend this hopper to anyone.
Check-It V2 Classic Sniper Pump
Delrin Oringless Bolt
NDZ On/Off with CP Rail
Freak JR with .682 and .684 inserts
VL Revvy 12v with Xboard
Ninja 45/45 With Empire ZN Cover
Speed and reliability
Battery life, that's about it.
Alright, so after getting 4 jams in one match in a tournament, I decided it was time for a change.
I tried out the Pinokio, and HATED it. I actually had a ball push the bend sensor inside and render the hopper useless.
I went for the Prophecy, because I realized that I was beginning to learn about tuning, etc. and I liked a more relaiable and adjustable hopper. That is what the prophecy is. You can adjust speed, tension, and sound activatability. I liked the nose cone system that wasn't like the Pinokio, because I liked being able to pop on the small cone for quick hopper ball or pump, or the long one for LONG scenario games and such.
The hopper had no jams while I used crap paint up to DXS Silver in it, and overall, I rate it 10x better than the Dye rotor.
Overally, my favorite High-End hopper on the market. My #1 favorite is still the VL 12v Revvy......But the Prophecy is in a close second!
Invert Mini with death stix barrel and Empire Prophecy hopper.
No tools required
Has a small profile
Really big feed hole
This might only be for me but my front doesn't close all the way
I'm going to go straight to the point and the point is that the Empire Prophecy is a really good hopper. I would say that it is the best out there in paintball. Its the best because it requires no tools, has a small profile, has a rip drive to unjam, many speeds, has a rf and sound function, easy to clean, usable out of the box, hold 240 paint balls, light weight and more. I have used it for quite a long time now and it has never failed. Its so easy to use, all you have to do is take it out of the box and secure it onto your feed neck. After using it for the first time I knew straight away that I made the right choice in buying this hopper just like all the other owners out there. I really advise you to buy this hopper because its the best one out there.It only comes in two colors and they are smoke or black.
There are now upgrades such as speed feed,cover sizes,color of the back of the hopper,material of the neck,9volt conversion kit, LTD board and more.it saves lots of battery and is very quiet. This is a good hopper for woods ball players because it conserves battery and does not keep spinning such as the Viewloader Velocity Junior.It has a magnetic lid which gets attracted to the hopper when it is pushed up. It is very light and if you put it on an Invert Mini or a Macdev Clone with a carbon fiber barrel and gas tank you basically have the lightest marker in the world.
in conclusion i just leave you with two words and they are BUY IT!
10 out of 10
Last edited on Monday, May 24th, 2010 at 5:05 am PST
Easy to use
Long battery life
Taking it fully apart can be difficult
I've been using the Prophecy for a little over a year now and I love this loader. I've used it in just about every type of paintball game...tourneys (indoor and outdoor), woodsball/recball games, scenarios, etc. And it has yet to let me down.
FIRST IMPRESSIONS: This loader is freaking LIGHT! It is very well balanced on the gun and does not make the gun feel top-heavy. The low center of balance does wonders for how the gun feels in your hands. When I got it I did not adjust any settings at all...I just threw in 4 AA batteries and hit the field.
ON FIELD PERFORMANCE: Let's face it...it does not matter how good-looking a loader is or what bells and whistles it has if it does not perform. The Prophecy certainly performs as advertised. I slapped this loader onto my Driod and preceeded to hit the field. Off the break this loader did not skip a beat. I practiced and played all day long (combination of ramping and semi games) while diving, bunkering, and running and gunning down the field. All of that and the loader kept right up with no problems. At the end of the day I was curious how fast this loader could go so I put my Droid on unlimited ramping (which caps out at about 26bps) and shot out an entire loader of paint. The Prophecy kept up without skipping a shot.
BELLS & WHISTLES: Out of all the loaders on the market the Prophecy has the most to offer in terms of adjustability and user interface. It is pretty much idiot proof to make the adjustments that you want to maximize the performance between the loader and gun. With the ability to use sound, RF, or a combination of the two it will please pretty much any one. And the best thing about the Prophecy is that you do not have to adjust anything...you can just throw it on your gun and go play.
TOOLESS: The Prophecy is tooless in it's design. It takes only a few seconds to remove the shells. But putting them back on is another story...I'll get to that below. With it being tooless it is very easy to get to the inside if you break paint, need to change batteries, or install a speedfeed. And the best part is that 99.9% of everything I just mentioned can be done by taking off the front part of the loader.
BATTERY LIFE: I've had this loader for about a year and I have changed the batteries 3 times...that's right only 3 times. And that is with playing tournaments, practicing, or just screwing around playing recball just about every weekend. I do, however, use the Energizer E2 batteries and that makes a huge difference in battery life. I can't really tell you how many cases I get off of a single set but if I had to guess I would say it is somewhere around 15-18 cases per set of batteries...and that might be a low estimate. I also do not know how many cases you would get out of a set of Alkaline batteries.
OVERALL DESIGN: The internals are based on the Halo B design but have been highly refined. The feed system is all magnetic and works increadibly well. I have yet to experience a jam, mis-feed, or crushed paint. The shells are very durable. I have dropped the loader onto concrete, banged on coutless items, taken hard dives, been shot in the loader while being bunkered and the shell does not even have hair-line cracks in it. The feedneck is very strong as well and feels very sturdy on the gun.
THE ONLY DRAW-BACK: The only weekness of the Prophecy is taking it fully apart. It is pretty complicated to break down every last component and then reassemble them in the correct fashion. The Prophecy is engineered to go together one way and one way only. But on the plus side: You do not NEED to EVER take this loader fully apart. The only part you really need to take off the Prophecy is the nose cone. The nose cone gives you access to the batteries and will enable you to clean out the insides. But if you really have the uncontrollable urge to take this loader apart you have been warned.
With all of the options of loaders on the market today it can be tough to choose one. I was in that same boat at one time. I did ALOT of research and chose the Prophecy over all others and I do not regret it one bit. The Prophecy is truly one of the best loaders you can get today.
10 out of 10
Last edited on Monday, March 8th, 2010 at 8:34 am PST